How to handle and store plain bearings commonly used on crankshafts, camshafts, and connecting rods used in many engines. Tool Links: https://amzn.to/2Ujfu5F Use these tools links to support How2Wrench and know we use the same tools as seen in the videos! Join this channel to get access to these perks: https://www.youtube.com/channel/UCBhM8DCKnT3qXwTW0eToyCg/join -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways One on one Techline: https://how2wrench.com/ols/products/techline-one-on-one Below are some links that help support me and my work. Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist
Hey friend Shane from how to wrench.com and we're gonna show you we're getting ready to restore these engine cases
And one of the things we need to do is get the the bearings that we we showed in the last video
They're all in spec. We want to get those out
we obviously aren't going to vapor blast those and
Before I show you how to do that and it's not just simply about take them out
But we really want to think about is that we don't mix up left and right in one two, three four
I can't write on these very easy
I mean I could take them off and try to write on the back side
But I got a much easier way to do this and then we started out in
Timestamps so a lot of the videos you can jump around and get right to the information you want and then we even start adding
Captions so you can pick your language. Enjoy the video
But the point I want to make is when you think about this engine case
When when a lot of people take something off and they set it on a bench to then go, you know
Start working on it and prying those out
You're gonna see here in a second where gloves too and there's a reason now what happened is this bearing from this left side
Is down the right and it's gonna be really easy to get confused
so the very first thing that I want to do is I want to go ahead here and I want to
Go like this. So this would be the orientation and what I'm gonna do is I'm just gonna simply flip that
In this direction now what that's gonna do is let me keep one to one two to two so on and so on
The other thing that I'm doing just because I think it's a really good habit is I have the engine
Set on the bench
Actually, this is the part that's upside down. This would be the nominal part. Here's your transmission
Here's where your counter shaft sprocket would be
So I like to set things out in an orientation as as they are on the motorcycle what I'm working on
So this would be the left side, which would be one two
Three four four cylinders and one two, three, four five for the mains
Okay. Now what I'm gonna do is I'm gonna simply just take my crankshaft. It's not super important here at this point
I'm just kind of setting this up. So it's not gonna roll around on me
You're gonna see here in a second next thing you want to do. Hopefully these aren't too small is
I'm going to
Put some gloves on because per every plastic gauge bearing manufacturer
Will tell you I don't know why but they tell you don't touch it with your finger
The little bit that I've heard is that the oils and your fingers are contaminants
Especially if you pick anything up off the bench or anything else can get into that bearing. So
one thing we want to do is treat these with
really really really
Really good caution now that I have gloves on that. I hate here's what I'm gonna do
Okay, there's no top or bottom or this doesn't matter
Actually, if you want to get in tight here to show what we have here. We have a couple different little relief tabs
That's a locating pin so that when you put the crank calves on that's what holds that so it doesn't spin in the engine case
That makes sense. Okay, so I'm just gonna put a little bit of pressure right here. Okay?
I'm gonna set that off to the side here. I'm gonna grab my matching one. Okay, it's that like that
Here's what I'm gonna do. I'm just gonna grab some grease around here. So that's my number one main
Go ahead and try and just get those to sit on there. Hopefully I have enough grease
Then what I'm gonna do is I'm gonna take a cable tie
And I'm being very intentional not scratch these or damage these
Okay, I first attempted just to run the zip tie backwards
If you've ever seen that trick where then you don't need cutters to work with it
But these cheap zip ties just weren't doing what I wanted. So
Whatever you do, just don't you know, crank it down there so hard you're gonna cause any damage
It's just to hold it in place, you know, I want them to be stable enough that I can at least
You know, maybe move to another bench or something, right?
All right, my friends that is how
You could go ahead and make things super simple
And what you'll see a lot of people do is they're gonna use baggies
Right, and that's what I was used to do
The challenge with the baggies is that now you have to think about how you're storing parts, right?
so if you think about up in here and if I have those fragile bearings that
Something potentially heavy could be put on it or whatnot
I don't care how good you label them, but now you talk about another risk, right?
There's no better place to store those than on the crankshaft. Yep, not only for
Location but also because we're trying to protect them
I'll see a lot of people take brand new ones and have them laid out and they size them and they scoop things up at
The end anything they throw in the box. These are something you want to be very fragile with
We don't want to change their shape scar them nick them or anything else any damage to these
For surely lowers oil pressure, right?
There's no doubt about it a scratch a nick a bend or anything is gonna affect that so I said best
You know best place when you don't need to take them out
Leave them or leave them in the case and when you need to take them out, this is how I do it
I love it. You'll notice all the connecting rods. Where are they?
You know, they're still on the rods
All right, my friends make sure like share subscribe make it a great day. And as always keep wrenching
Hey friends, we're super excited announced that the how to wrench channels been approved for memberships. What's that mean for you?
What would it look like if you could get member only content many of you been asking over the last year as we've put out?
Surveys and try to get some feedback that you missed the old deep dive long videos
Those are very hard to produce and they're very costly. They take an immense amount of time, especially to make it
Creative and interactive for you to get that deep understanding. We have a lot of schools
Institutions do-it-yourself errs
I mean really people from all over the world over 200 countries are using our content to get a deep
Understanding to help themselves or to advance in their career. Well, those videos are coming back
That's the kind of content that's going to go in this membership channel because we can offset some of those costs
So that's one you're gonna get the deep dive videos, too
You're gonna get access to member only streams and live chats to where you can actually call in
Ask questions and get answers on the spot and have a back-and-forth Q&A session with other members as well
We're super excited about that and with the member
Channel, it's gonna really make it more intimate
We're gonna be able to bring that back into more of a community instead all the Yahoo's out there
They're just causing trouble and being idiots
This community has always been about helping each other and getting those the answers to the questions we need
I mean you gotta remember I love YouTube too when I want to learn something
It's quite often one of my first go-to places to get information or to learn something that I'm trying to do
So we love that we can do this for you as well
And we just want to make this a community that is more attentive. So we want to be more relationship focus
That's a big thing of the memberships. The other thing is YouTube does this I think it's kind of funny
But we're doing the emoji. So if you're a new member, it's gonna be a green one
We kind of went along the lines of like training does and most certification programs bronze as your entry level
Silver's your middle of the road and then gold is your top certified, but we added one more
We added a red one just to say hey, thanks for all the love after you've been here for a while
So for all you that love that kind of stuff, it's there for you
What else are you gonna get with this? What you're gonna get is really honestly in my opinion
It's really a way just to say thank you
We've tried really hard over the years to figure out creative ways to not
Beg if you will but to try and encourage and remind people that hey
I got a full-time job like I've always done this on my own buck
All these expenses are my own as I move to this new location Phoenix. It's really expensive
We got a building insurance, you know, we got everything
So it costs a lot to be able to do all this and we really do need your help to offset some of that
So this is a way for you to really easily just say thank you and create that
You know, like I said that deeper relationship with us as well to get the answers that you want and you need
So with that being said, I hope this has caught your attention
I hope you thought man, that's really a great idea. Look at the options below and hit that join button
It'll tell you what tiers you can figure out what works best for you and what attracts you we are gonna get back at it
We're super excited about this. We're already gonna start moving forward making content. That's member only
So those videos we were just talking about but my friends whatever you're doing be safe
I hope that you're working on something that's making you smile or that you're getting through it or that's making you money
So we're gonna get back at it. But as always make it a great day and keep