J'ai encollé les coupes ! En gros, 15 minutes avant de coller définitivement vous devez mettre de la colle blanche sur vos coupes. Une légère couche qui va boucher les pores du bois. Cela va donc permettre à la colle finale de vraiment avoir une surface de contact optimale et donc de bien mieux accrocher 🤘🏽.
Ensuite avec la petite sangle vous venez serrer le tout et pour vérifier l'équerrage du cadre vous devez prendre la distance des diagonales. Si ces côtes sont identiques c'est que vous êtes d'équerre.
En général avec la sangle et si vous avez bien coupé à 45° alors le cadre sera automatiquement d'équerre.
Vous les trouvez comment ? ☺️
Pour le prix : 75 euros de photo, 35 euros de verre et le bois c'est à vous de voir je l'ai eu gratuit mais sinon comptez 20 euros.
Totalité : 100€ 🥰 et une bonne journée de taillage.
so there it's good I made this one and
this one so what I do
is that I put them I glue I
first clip the cuts like that after
when I'm going to stick the glue will not be able to
penetrate into the wood so
it will really stick whereas
if we just put glue and glue
it can go into the small holes
in the wood and as a result it sticks less
well so I glue some a little before like
10 minutes before 15 minutes before and
after I put the real glue which will be
used after hop I put my antlers I
put a little strap there I have I make
little folds so Changle a little
bit I make little folds by the time
I can hop and then after I char well
so like that it's very tight I
check my angles so I do the
diagonals you know that to check
the squareness of a rectangle or a
square it you simply have to take the
diagonals and they have to be the
same length once they are
the same length we can go there so
well what I did was that I
took the small nailer Fine there, so
the little points, very fine like
that, you can't see them, you see there, it
gives this and then hop, I put little
points afterwards, well, I'm going to do the
finishing, there's a little bit of glue
overflowing, but that's it. is normal and then
with the small one the little finishing sanding
[Applause]
nickel so there I applied
the
parquet oil then after
a little wipe with a cloth on it to
remove the excess and
so on Gliss there damn
wow and that's it the difference in color
is gross, it's with parquet oil,
what do you prefer,
frankly, it's not bad, after
that it doesn't look the same in video,
of course, but I find that it's is
still here it's classy
[Music]
[Music]
[Music]
