781. Using a Carved Clay Roller to Throw a Covered/Lidded Jar with Hsin-Chuen Lin 林新春 滾花紋蓋罐拉坯示範

Hsinchuen Lin
205 followers
5 Video Views·Jan 31, 2024
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more information, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
I like to make a roller texture car jar
and this roller I made it years ago I
carve it out of clay and I'm going to
use it for today's demonstration if you
know how to uh throw on the wheel you
can pretty much make your own grer
texture
too so I'm going to use that to do the
demonstration
today
and if you are struggle with open up
your Flo nicely flat I have a tool to
help help you to compress
it and this is my number
six compressing
stick okay so you can see that the flow
is been
compressed
since I'm making a covero ja so I did my
rim a little bit
thicker
right here I prepare a cube so that I'll
be able to drop it on the
inside on the RIT newspaper if your
cylinder is tall you probably need to
wrap two layers of a newspaper and since
this is not that tall U one layer of
newspaper should be okay okay and I
don't want the wrinkle here to affect
the the bottom too much so I'm dipping
in the water St the newspaper a bit and
then I just drop it
in uh to be able to roll the texture
nice and deep you need to have a support
that's why I insert this tube
inside and then after that I'm just
collar push squeeze the clay
so the wall is fitting tight on the
supporting
tube and after that use a water drip
to clean up the
surface get rid of all the slip and
throw
upk right so this is the uh
roller I made myself out of
clay trying to start to to roll from
this
point and make sure that I add the water
so it's not sticking onto that
surface
all right so after I roll that texture
pull out the cylinder the supporting
tube and then I pull out the
newspaper I'm going to add little bit
water to the inside of the cylinder to
licate it cuz all the
uh the slippery or the water was absorb
by the
newspaper and I can start to stretch it
out remember that I told
you I the rim slightly thicker
intentionally so that if I want to close
it I have extra clay to do that
chop the bottom off the corner a
bit
[Music]
[Music]
[Music]
[Music]
[Music]
right so that is the uh the body of the
cover
jar
okay now let me make a lid for
that since I'm going to trim the nap so
I don't need my base very wide
that's why I keep on squeezing it so the
base is
SM the shape like a to up
shape okay so that's about right and
that
okay so that is cover J and I will trim
to show you the
result thanks for watching and see you
next
time
[Music]
okay
[Music]
