mod05lec24

IIT Roorkee July 201
61 followers
3 Video Views·Dec 5, 2023
VMINTEQ: Application of Gases, Acid-Base Titration
The open and closed carbonate systems, solved by hand in the previous lectures, are analysed by VMINTEQ. The concepts of titration are discussed and equations are derived for the titration of monoprotic acid and base. Estimate of pH of equivalence point of various kinds of titrations are derived.
Hello everyone welcome back to latest lecture session.
We are going to briefly summarize what we have been up to in the last couple of lecture
session. So, we are talking about the carbonate system, initially we discussed the close system
as in when the relevant aqueous phase is not open to the gaseous phase and we are done
with analyzing it.
Then we moved in to the more complex system where carbonate system in the aqueous phase
can be in equilibrium with gaseous phase. So, you can have exchange of carbon dioxide
between gaseous and aqueous phase and thus that it increases the level of complexity
in system and we looked at the basics with respect to the component balance. We looked
at how to analyze the system. Let us briefly again look at that.
So, we have the system here and this is aqueous phase and here we have the gaseous phase.
So, when you have the carbon dioxide in the gaseous phase and you have the carbonate systems
which are represent using CO3 total here and you can have or it will have change in phase
of carbon dioxide from gaseous to aqueous. We know that carbon dioxide gaseous can dissolve
to CO2 aqueous and obviously that is CO2 aqueous would be in the form of H2CO3 and aqueous.
And again we know from our background that H2CO3 can disassociate into H+ and HCO3- which
can further disassociate and be in equilibrium with H+ and CO32-. So, the relevant derivation
might be seen relevant to complex but it is very simple, we just define everything in
terms of the total component. Why is that? Because only the component is conservative.
So, in the close system we only looked at H total for the liquid or CO3 total for the
liquid. But for the open system, we have another phase which is the gaseous phase. So, we had
H total or we define H total as the sum of H total in the liquid phase and also, the
gaseous phase and then we tried to correlate that with the change in CO2 or CO3 total or
CO2 total between the gaseous and the aqueous phase and it is as simple as that and then
we conducted the balance again on H total in the aqueous phase and we analyze for the
system and went through that. So, I am not going to go through the derivation again,
but in last session we haven’t looked at the application with respect to VMINTEQ when
the system is open so, we will get that done now. So, we will move on to V MINTEQ here.
So, first we look at the simple case here. So, let us say I have H2CO3 in my system,
I am going to take an H+ and let us say the concentration that is going to be equal to
0.001 molal and add that to the list and let us say it is going to be H2CO3 where it is
going to be two times, let me change that 0.002 add that to the list and then CO32-.
We are going to look for the component Co three two minus that is going to be at 0.001
molal and we add that to the list. Let us just check out a particular component 0.002
and CO32- is 0.001 and where did you get that?
So, we have H2CO3 in the system. So, components now are H+ and CO32-. So, I am conducting
the balance between H total and CO3 total and H2CO3. I am assuming that the initial
concentration is equal to 0.001 molal and that is what we have, so, H total will be
equal to two times initial concentration of H2CO3 initial and CO3 total is going to be
one times the initial concentration of H2CO3.
Obviously we are not going to go in detail because we have covered this in detail in
previous sessions. So, this is what we now putting in system in V MINTEQ. So, we have
H total is equal to now two times 0.001 that is equal to 0.002 and CO3 total will be equal
to 0.001 molal. So, now we are going to switch to V MINTEQ.
Let us edit list and you all included this earlier. So, going back to main menu there
is obviously a close system. So, for close system aqueous phase is not open to the atmosphere.
There is no gaseous phase here, so, I am going to run V MINTEQ as it is. So, I am going to
run it.
So, let us see what we have, pH of 4.6 and that is expected H and we have the relevant
concentration of CO32-, H2CO3 and HCO3-. So, as expected because pKa1 = 6.3 and pH is 4.6,
you would expect the protonate form to be predominate. What is the protonate form here?
It is H2CO3.
So, if you look at the relevant value on V MINTEQ the result summary we will see that
H2CO3 predominates which is what you expect. So, let us look again as you see here pH 4.6
H2CO3 predominates 9.7 into 10-4 and then HCO3- is 10 times lesser. Obviously CO32-
the most deprotonate form is in much lesser concentration.
So, keep in mind the pH of this particular system is 4.68. I am going back to the input
and now I am going to change the system such that it is an open system. So, initially I
am going to keep the carbon dioxide concentration relatively low which would be similar to what
you expect in the atmosphere.
Let us see if there is any change in pH and in the second trial, we are going to increase
the carbon dioxide concentration that would be in equilibrium with aqueous phase. So,
what would you expect from such a scenario? So, if you take a few seconds you will see
that carbon oxide pressure in the gaseous phase increases.
You are going to have equilibrium such that carbon oxide going to change its phase from
the gaseous to aqueous phase and then you are going to have formation of H2CO3 and so,
on. The relevant acid base dissociations and thus you are going to have or expect a decrease
in pH. So, let us try that now.
So, here when it is an open system, you need to go to gases and specify. So, here this
is the concentration in atmosphere or the partial pressure you can expect in the atmosphere.
So, first stick with that and try to add that and I am going to move on. Let me show you
again gases specify and add. If you want to you can look at fixed species here CO2 gas
is here now you have the relevant gas that you looked at, so, back to main menu. I am
going to run MINTEQ.
We see that pH is 5.6, so, what does that mean? Earlier we had pH of 4.6 and now we
had pH of 5.6, what does that mean? So, it means that the equilibrium is towards the
right so, carbon oxide or the CO3 total left the aqueous phase into and changed phase into
the gaseous phase in the form of CO2. So, what does that mean? You are having a net
loss of acid from system.
So, what does that translate into? It translates to an increase in the pH. So, that is what
we looked at, so, let us just look at that once more. So, what was the case here? The
earlier case when it was just the close system at these relevant concentration of 0.002 molal
for H total and 0.001 molal for CO3 total, I think we calculated the pH to be 4.6.
But now the same concentrations we have the gaseous phase here and we mention that the
partial pressure of that particular carbon oxide was 0.00038 atmosphere and so, on which
is similar to what you would expect in nature and when we calculate that, we saw that at
equilibrium pH was around 5.6. So, why that is because here the partial pressure seems
to be less and you can look at the Henry’s constant and so, on.
We are not going to go into that so, what happened was CO3 or CO2, let us say, escape
to the gaseous phase. So, now you have increase in acid concentration here and that is why
you see an increase in the pH. So, now we will move back to open system back to input
menu. So, now instead of having relatively low partial pressure of carbon dioxide, I
am going to increase the pressure of carbon dioxide.
The partial pressure of carbon dioxide, so, again think of this or visualize this you
have lot of moles of carbon dioxide in the gaseous phase and relatively less numbers
of moles of CO3 total in aqueous phase. So, what is going to happen the equilibrium is
going to shift in such a way that the moles of particular CO2 or CO3 total, obviously
are going to change phase from the gaseous to the aqueous phase. So, let us look at that
we will come back to the gases here.
I am going to specify the gases here. But this time instead of saying it is of multiple
of 1, I am going to say maybe it is hundred times. Let us see here we are just saying
until the partial pressure of CO2 as a multiple of the above. So, if I want to go for zero
point zero three eight atmospheres, I am going to say it is going to be hundred times here
and I am going to add that and now let’s run MINTEQ.
Now again you see that the pH has fallen down into 4.6. So, what would be the carbon dioxide
concentration in equilibrium with particular system? So, again we can look at that so,
more or less you could see that when the partial pressure was 0.038 atmosphere that is going
to be in equilibrium with particular system which is H2CO3 initial concentration of 0.001
molal or you can also, click on gases here and see that it is 3.8 * 10-2 atmosphere.
This is the partial pressure of carbon dioxide that will be in equilibrium with system given
that the relevant species concentrations are such as shown .
So, again if I want to decrease the pH further what do I need to do? I obviously need to
increase the carbon dioxide concentration. So, instead of 0.038, let us look at zero
point three eight. So, I go back to the input menu and again back to gases and specify and
instead of 100, let me try out a 1000 here add and back to main menu and going to run
MINTEQ and here you see now fallen pH. Obviously why is that because now you are increasing
the concentration of carbon dioxide in the gaseous phase. So, again the equilibrium has
shifted. So, now to reach equilibrium again what is going to happen? The carbon dioxide
from the gaseous phase is going to shift to the aqueous phase. So, now you are going to
have H2CO3 produced in system and thus you are going to have a decrease in pH.
So, this is what we have observed this far and that is what we have been discussing with
respect to component balance in earlier couple of session. So, now we will move onto titrations.
So, what are these titrations about? if you are B tech graduate or even twelfth standard
graduate, you would have some point in time conducted titration. Let us look at what we
are upto here.
So, we have conical flask here and we have some solution here and then you have here
burette known concentration and you know a known compound here of known concentration
and here you have an known compound but unknown concentration and more or less the basic set
up is you want to find out the unknown concentration of particular compound in conical flask.
How do you do that? You end up titrating it with relevant compound. You are going to choose
the compound. But we are going to come back later. So, you have a known compound in the
burette, known concentration in the burette and you are going to titrate that and look
at the relevant volume and then calculate the equivalent concentration. So, this is
the basic premise of almost all the titrations but keep in mind that there are different
kinds of reactions.
We need to consider one is acid and base which were currently covered. But you can also,
have other reaction such as the redox reaction, the aqueous complex reaction or the precipitation
reactions. But now since we are talking about the acid base we are going to look at those
titrations that are relevant to the acid base reactions. In general obviously acid base
reactions are the most widely used kinds of titrations and we will see why later on.
But again we are going to look at particular set of examples for acid base relevant titrations.
So, here, let us say I keep titrating it here with my burette. We are adding a known base
in my particular conical flask and I am titrating it with a known acid HA. Let us say I am titrating
it with HA and HA is out here and NaB is out here
.
So, you will keep titrating, keep titrating. People in general use indicators for color
change and so on. So, what happens at that particular point? So, in general at that particular
point the pKa of that particular indicator reach that particular point. So, you are going
to have more protonated form as you keep increasing the acid. So, you can observe a color change
and so on and but what does that mean?
It means that at that particular equivalence point or that particular point where you stop
the titration the amount of acid that you are adding is equal to equivalent to the amount
of base in particular conical flask. Hopefully you understand that, so, let us write them
down. So, at the equivalence point what is going to happen? The amount of acid
added will be equal to the equivalent to the amount of base that is present in the solution
and because you know the concentration of acid that you are titrating it with. So, then
you can calculate the concentration of base present in the conical flask. So, again the
key is that it is equivalent concentrations and I think you are familiar with what we
are talking about at this stage of the class.
So, again amount of acid added would be equal to or equivalent to the amount of base present
in the solution. But vice versa, let us say if you had acid in particular conical flask
which has been titrated with the base and so, then how can we transform that particular
sentence here? The amount of base added would be equal to the amount of acid that is present
in the solution. So, that is straight forward.
So, again let us look at one case and try to calculate this as equivalence point. So,
for example people use different indicators. So, why that particular indicator or search
depends upon where the equivalent points lies? So, you need to know or have done prior idea
about where the equivalence point is to be able to stop the titration at that particular
point.
So, you can both use pH meter and stop the titration at that particular point or you
can also, use indicator. If this particular color change or such phenomena falls within
the range of particular equivalence points.
So, let us see how to go about that, we are going to look at the example where we have
base unknown concentration, we do not know the
concentration and we want to find that unknown concentration and I am going to titrate it
with an acid HA which is an example here of known concentration. So, what am I trying
to get, we are trying to get at equivalence point. So, we are trying to get at the equivalence
point. So, how do we do that? Again crux of the solution lies in setting up the component
balance. So, let us go back to that. In general. We obviously need to identify the species.
Species are those compounds which we know at this stage that are at equilibrium in particular
solution and they obviously be H+ and OH- and I will have Na+ to the relevant salt and
then you will have the protonate forms of the acid and the base protonated forms.
You will also, have the deprotonate forms A- and B- and from our previous prior knowledge.
We know we need to choose components and they always are going to be H+ and Na+ and A- and
B-. You need to choose component such that you will be able to arrive at particular species
and that is something we covered in great detail earlier so, again skipping it.
We need to come up with formation equation which we are not going to go through. Now
formation equation and then we need to get down to writing tableau and then the total
component balance equations.
So, at this stage we can skip these three aspects and let us write down H total would
be equal to the concentration of H+ at equilibrium that is the key here, minus the concentration
of OH- + the concentration of HA+ the concentration of HB again protonate forms of A and B. So,
we have this particular case again.
What is H total equal to? We want to transform this equation to remove those variables which
are irrelevant to us and substitute them with variables that are relevant to us. So, H total
is equal that would be depending upon what we are putting into the system. So, what is
the only source of H total if we look at HA that we are putting it in the system or [HA]0.
And obviously, H total as you look at from stoichiometry here or if you look at the component
balance too, it is going to be equal to A total. So, here that would more or less mean
A total is equal to concentration of H+ - and how can OH- be written as? The water dissociation
constant is equal to H+ times OH-. So, thus OH- is going to be equal to KW / H+ (water
dissociation constant divided by H+) + HA (the protonate form of A) + HB (the protonate
form of B).
So, in this case what aspect or what are the variables that we know that we can express
in terms of ionization fraction. You get α0 and α1 for monoprotic acids and conjugate
bases. So, we are going to use that concept here. So, let us refresh memory briefly. So,
we have α0 for particular acid is going to be equal to HA or the protonate form of the
acid divided by the total acid as in both its protonated forms, and deprotonated forms.
What is α1, the second ionization fraction, is going to be equal to the deprotonate form
divided by the concentration of [HA] + [A-].
So, again α0 will give an idea about the deprotonate fraction of the acid in its protonate
form and α1 will give you an idea about the fraction of the acid present in its deprotonated
form. So, that is what we have here α0 and α1 and we know that this is equal to HA divided
by, as you can see from component balance, that is going to be equal to A total and this
is equal to A-divided by Atotal.
So, HA is going to be equal to α0,A * Atotal and HB is going to
be equal to α0B * B total. This is one equation we have here so, I am going to take this particular
term out on the left hand side. So, what is that going to be here? We are now going to
have (1 - α0A) * Atotal would be equal to concentration
of H+ - Kw / H+ + α0B * Btotal
The key here is that the sum of the ionization fractions need to be 1. So, (1 – α0A) would
be equal to α1A. So, we are going to substitute that here. So, let us go back to that.
So, α1,A * A total would be equal to the concentration of H+ - the OH- concentration
+ α0B * Btotal.
So, here we are going to make few assumptions to arrive at the answer. So, here as we are
adding an acid I am assuming that the equivalence point is going to be in the acidic region.
So, can assume that the OH- concentration is negligible. So, that is something we are
going to make and we are also, going to assume that the acid that you are titrating solution
with is a strong acid and let us see what that means. So, here we are now going to assume
that the OH minus concentration is negligible and why is that because we are adding an acid
and the pH will be relatively low. Now we are going to be left with α1,A * Atotal is
equal to concentration of H+ + α0B * Btotal. ([OH-] ≈ 0)
So, let us try to simplify this further. Now we know that we are going to use strong acid,
so, what does that mean? Now at almost all practical range of pH it is going to dissociate
or it is going to stay in its deprotonated form. So, what does that tell you about α0
and α1, so, if it is going to stay in its deprotonate form, α0 more or less is going
to be equal to zero or more or less nearer to 0 and α1 is going to be 1 and why is that?
So, we know that α1A is equal to the concentration of A- divided by concentration of the total
acid and if it is a strong acid it is going to dissociate at almost all pH range and it
is only going to stay as A minus. So, you see that [A-] divided by [A-] more or less
it is going to be equal to 1.
So, that is what I am going to substitute here. So, it is going to concentration of
H+ + α0B * Btotal and now we come to the crux of the issue the equivalence point where
we know the amount of acid added would be equal to the total amount of base present
in the solution. So, now we are going to use that to simplify solution equation here. So,
now
at the equivalence point Atotal is going to be equal to Btotal. So, now I am going to
have B total is equal to the concentration of H+ + α0B * into Btotal
Since at equivalence point At = Bt And again taking this term out here on to
the left hand side. Again it is going to be (1 – α0B) and again going to be equal to
α1B. So, what are we going to have here α1B * Btotal is equal to the concentration of
H+.
So, obviously we need to simplify this further and in general we are going to consider that
B is a weak acid. So, I am going to say that pKa is going to be far greater than pH, so,
now assuming that HB is a weak acid and from background we know that pKB is going
to be far greater than pH (pKB > pH). So, the KB is far less than the concentration
of H+ (KB << [H+]) and we can we apply this. so, let us write this down here that α1,B
is equal to the deprotonate form of B which is [B-] divided by the concentration of the
protonated form of B which is [HB] + [B-] and from background we know that, it is going
to be KB by concentration of H+ + KB.
So, if KB is far less than H+. What does this turn out to be? I am going to say that it
is going to be equal to KB by concentration of H+.
If pKB > pH then KB << [H+] Then
So, if I am going to substitute this in this particular equation here let us see what I
am going to end up with. So, I have to refer to this back and forth.
So, KB by concentration of H+ * Btotal is equal to concentration of H+. So, let us look
at that again where have this α1,B is now equal to KB by H+ into Btotal is equal to
H+. So, let us simplify this further KB * Btotal is equal to concentration of [H+]2 and now
taking logarithm on both the sides let us say log of KB + log of Btotal would be equal
to two times log concentration of H+. log KB + log Bt = 2 log [H+]
So, more or less transform, I am going to switch the swap the two sides. So, let us
write down just to simplify my particular calculation here. Log KB plus log Btotal.
2 log [H+] = log KB + log Bt
and now we know that pH is equal to minus log concentration of H+. We also, know that
we are applying pKB is equal to - log KB. So, I am going to substitute those particular
terms, so, it is going to be -2 pH at the equivalence point. So, I will say EP is equal
to - PKB + log Bt. Since (pH = -log[H+]) and pKB = -log KB
- 2 pHeq = - pKB + log Bt And so, the pH at the equivalence point is
going to be equal to 0.5 * (pKB - log Btotal). pHeq = 0.5(pKB - log Bt)
So, again this mean now if I know what the base I am looking for or trying to calculate
the equivalence point is said to be easy because if I know the base B, I can calculate.
I know the I can get the pKB value which is here and general as you see even though Btotal
has an effect on equivalence point pH of the equivalence point because logarithm scale
it affects relatively less. So, in general if you have an idea about the base that you
are titrating for let us say or against you can come up with pH of equivalence point and
that is the crust of the issue. Once the pH of the equivalence point is known
you know when to stop the titration or you can obviously look for particular color change
or an indicator. So, that will have its particular color change in the indicator at the this
particular pH. So, with that we will stop for today and I will come back to you with
relevant applications of V MINTEQ in the next session thank you.
