Lecture 2: Sound Wave Propagation in Fluid-I

IIT Roorkee July 201
61 followers
141 Video Views·Dec 4, 2023
This lecture describes the process of sound wave propagation through a homogenous fluid medium, and shows the derivation of the linear acoustic wave equation. Concept of harmonic plane waves and wavefront has also been described.
Acoustic Materials and Metamaterials
Prof. Sneha Singh
Department of Mechanical & Industrial Engineering
IIT Roorkee
Welcome to the second lecture of our course and this lecture we are going to study about
Sound Wave Propagation in Fluids.
So, the outline for this course is as follows. So, we will study about what happens when
the sound wave propagates through a fluid medium and then we will study something called
as the Acoustic wave equation. So, this wave equation is a wave equation that can be used
for any fluid medium and any kind of sound wave propagation, so a general equation will
be derived. Then will study what are the various Bulk acoustic properties and then we will
study one special type of wave which is called as Harmonic plane wave.
So, let us begin our class. So, as we discussed in the last chapter in the last class was
that, any wave can be represented as a disturbance over time and a disturbance over space. So,
it can be represented as a sinusoidal disturbance over space and time provided it is a harmonic
periodic sound wave.
So, when the sound wave is generated in a fluid medium, it will cause both disturbance
over space as well as the disturbance over time. So, it will be a function of both space
and time. So, let us see, let us define some quantities here. So, for a fluid medium; the
total pressure at any time or the instantaneous pressure will be whatever is the mean pressure
of the fluid plus the acoustic pressure. Because acoustic pressure as we told was the mean
pressure plus whatever is the fluctuation. So, the total pressure becomes whatever is
the mean pressure plus whatever fluctuation is created. So, the total pressure can be
calculated like this. Similarly because the pressure is changing,
the density of the medium will change. So, here we are assuming that we have a medium
where we are not adding any additional mass. So, the mass of the medium is fixed, no additional
particles are being added to the medium. So, when a zone of high and low pressure is created;
so the density will also change and the velocity of the particles will also change, because
this disturbance propagates by the oscillation of particles. So, when the particles are oscillating,
the velocity is also going to change. So, similar equation can be derived; the total
density then becomes whatever is the mean density of the medium plus the density due
to the acoustic pressure. Similarly we have V; so this becomes whatever is the density
or the total velocity of the particle becomes the mean particle velocity plus the acoustic
velocity. And now we are assuming that there is no mean flow. So, the mean velocity is
0. So, we take this assumption when we come to derive an equation for sound wave propagation.
So, as we said in the earlier class I had said that, the fluctuations are very very
small. So, they can be of the order of 10 to the power minus 10 to 10 to the power minus
4 times the actual pressure of the medium, and even such very minute fluctuations are
perceived as sound. So, because this acoustic process always involves very small compression
and very small expansion; therefore, when the when such expansion and compression is
taking place, then the temperature gradient that is created is not sufficient enough.
So, it is almost negligible. So, for such very very small compressions and expansions
of the fluid particle, we neglect the temperature gradient. And we neglect the thermal conductivity.
So, overall there is no change in the thermal energy, when a acoustic disturbance propagates.
Because of these very small values of fluctuations that are happening; there is no sufficient
gradient generated and that is why there is no heat transfer during such process. So,
for all the study of acoustics, we assume that the acoustic process they are either;
they are considered as adiabatic and reversible or we can name it as isentropic. So, isentropic
is the name for a process which is both adiabatic and reversible in nature. So, this is what
is assumed in physics that because the process involves such small fluctuations, the process
can be considered as adiabatic and reversible.
Empirically from the field of thermodynamics a relationship has been derived. So, if we
have a real gas, then the relationship between the pressure and the density variation is
given by this equation. So, this is the derivation of this is out of course, because it is from
the field of thermodynamics. So, this is a typical relationship between this is called
as the adiabatic relationship of a real gas. So, we will directly take this equation into
our derivation. Now we know that the acoustic fluctuations they are very very small. So,
this rho minus rho naught is going to be very very small. So, this quantity is extremely
small and this is a Taylor series expansion. So, the higher order terms they can be neglected;
all the higher order terms they can be neglected, we only retain the first order terms. So,
this equation can be approximated to P is equal to P naught plus del P by del rho and
rho naught into rho minus rho naught and we are neglecting all the higher order terms.
So, this is the equation we have got. Now let us talk about another parameter of the
fluid medium; it is a very important parameter which we call as adiabatic bulk modulus.
Now you already know about what is a modulus in the field of solid mechanics. So, when
we have a solid medium; the modulus of elasticity, then we have bulk modulus, modulus of rigidity
and so on. So, the usually measure what is the resistance to deformation. So, bulk modulus
measures what is the resistance to compression or expansion. So, it is a resistance to a
change in the volume or change in density.
So, in the same way for the fluid medium, this adiabatic bulk modulus which is represented
by the symbol capital B is the resistance to compression or expansion as the case may
be for the force of this fluid medium. And mathematically this particular quantity is
defined as B is simply whatever is the mean density of the medium multiplied by the rate
of change of pressure with respect to the density. So, rho naught del P by del rho,
the value of this at the mean density. So, this is what, this is how adiabatic bulk modulus
is defined. So, we had this particular relationship, this
was the adiabatic relationship. So, if we replace this value now with the definition
of bulk modulus this entire thing. So, this has been replaced. So, what do you get here?
So, bulk modulus is this. So, this quantity becomes B by rho naught, this quantity becomes
B by rho naught.
So, we replace this quantity here. So, now, the equation we get. So, this is the adiabatic
relationship for the propagation of sound waves through a fluid medium; this is the
relationship we are getting. And now we know that acoustic pressure is what; it is the
difference between the total pressure and the mean pressure. So, this is the acoustic
pressure. So, this becomes B times rho minus rho naught by rho naught.
And now we are going to for the sake of simplicity of derivation we have defined a new term which
is called as the condensation rate. So, it is a rate at which the fluid particle undergoes
condensation which is change in the density. So, it is the rate of change in density which
is rho minus rho naught by rho naught. So, here s is rho minus rho naught by rho naught.
So, we have defined a new variable. So, we can replace this as acoustic pressure becomes
B into the rate of condensation. So, this is the first equation will use it later and
I will go through it, so we will recall this.
Now, let us take a small volume element within the fluid medium. So, now, we will see it
is the equation of conservation of mass. Now as I said earlier that, we are not adding
any additional mass to the fluid medium only some disturbance is propagating.
So, in that case the rate of change; in that case suppose the particles they come and go,
so they are oscillating and some particles they enter in this elemental area and some
particles go outside the elemental area. Then the net increment in the mass is what were
deriving; so the increase in the mass within this volume element. Let us say increase in
the mass per unit time. So, it is the rate of increase in the mass.
So, what is the rate of increase in the mass is what we are deriving. So, the rate at which
the mass increases in this particular small element of a fluid is whatever mass is entering
minus the mass going out. So, the rate of increase in mass will be the rate at which
the mass enters that element minus the rate at which the mass goes out of the element.
So, for every, then we have decomposed it. So, for the different directions x, y and
z we are seeing what is the rate of increase in the mass along the x direction, y direction
and z direction. So, let us take for example, one particular
direction, z direction. So, here you see that the rate at which the mass is entering this
face; this is the face if you are taking the direction. So, the mass is entering from this
face and it is going out from this face. So, the rate at which the mass is entering will
be the density times the velocity at this point. So, rho u x this is the, because we
are I am describing here about z directions. So, rho u z is the rate at which the mass
is entering this face then it is going out; then this particular. So, let us see, then
it can simply be given as whatever is this rate plus whatever is the change that occurs
over the distance of d z. So, this variable we simply differentiate it over d z multiplied
by the distance over d z. So, what is a rate at which it is changing
over z direction multiplied by the distance that it covers. So, this becomes and d x multiplied
by d y becomes the area. So, we have rho into velocity into the area through which it is
entering and the area in this case is d x multiplied by d y. So, this becomes the total
increase in the mass along the z direction. So, total. So, if you solve this, this quantity
cancels out, you left only with this term. So, this is what you get d x, d y and d z
becomes the net volume of this element. So, we have replaced it like this. And we get
similar equations for y and x axis. So, if you combine these equations together,
this is what you are getting; del by del x of rho u x, del by del y of rho u y, del by
del z of rho u z. d V is equal to minus nabla times. So, this is what we are getting. Now
we know about the Laplacian operator nabla. So, nabla is the Laplacian operator which
is defined as del by del x plus del by del y plus del by del z; and it operates over
some vector quantity. So, here this can be written in the form of
this Laplacian operator as it is the negative times the nabla of rho into u; where u is,
it has a x component along the x axis, it has a y component along the y axis, and it
has a z component along the z axis. So, it is simply nabla times rho of u. So, you get,
the x component gets multiplied with, the x component is differentiated with respect
to del by del x; the y component with del by del y; and z component with del by del
z So, the overall equation that you get here,
this is the quantity that you are getting. So, this is the net increase in the mass;
and the net increase in the mass per unit time can also be written as del rho by del
t. So, del rho by del t is equal to this. So, the quantity that we have derived is the
increase of mass per unit time. So, which means that, the increase of mass per unit
time is also the increase in density per this is the rate in; the rate at which the mass
is increasing per unit time can be written as del rho by del t and this will be simply
minus nabla times of the quantity that we have derived, this quantity.
So, you put it in the left side and this is the equation you get del rho by del t plus
nabla times of rho u is equal to 0. So, this equation we are going to carry forward and
we are going to use.
Now, the net force experienced, let us again consider the same fluid element. So, now the
force can be given as simply the pressure multiplied by area, right. So, if you consider
the elemental force of this fluid element. So, it will be simply whatever is the change
in pressure multiplied by the area. So, here let us consider the x axis here I
have considered; so the change in pressure over this face and the change in the pressure.
So, we are taking this face and this face; so these two different faces. So, let us see
the pressure at this face is P which was a total pressure of the medium fluid particle
and then as it goes through a distance of d x; if this is the pressure gradient along
x axis. So, this is the rate at which the pressure is changing along x axis; then this
multiplied by the distance will give you what is the pressure at this particular point,
the change in pressure. So, the pressure at first face minus the pressure at second face
times the area of the face; so pressure, the change in pressure multiplied by the area
is giving us whatever is this differential force.
So, again this quantity cancels out and d x, d y and d z becomes d V. So, what we get
is, we get this particular equation. And similarly it can be done for y axis and z axis. So,
the total force again becomes del by del x you have minus del by del x minus del by del
y and minus del by del z. So, again we introduced the Laplacian operator. So, it is this Laplacian
operator applied over P d V. So, this is one equation we are getting.
Now, the acceleration of this particle can be whatever is the change in the velocity
of the particle; so the change in the velocity, so velocity final velocity minus initial velocity,
so it is d u by d t. So, the expansion of this is you can use again
the Taylor series expansion, the Taylors expansion. And this derivation again is course on mathematics;
so it is out of course. So, when you expand it to a left with this quantity. So, it is
simply del u by del t times u nabla u.
And now force is simply acceleration into mass by Newton’s second law. So, we already
had the equation for force here; this was the equation for force and this was the equation
for the acceleration. So, this force is becomes acceleration times the mass. So, this is the
mass; mass is rho d V, this becomes rho times d V, density multiplied by volume.
So, we have a place d m by rho d V and we already have the expression for the d f and
the expression for net acceleration. So, this becomes the expression for the net acceleration,
this becomes the expression for d f and this quantity is d m. And assuming this double
gradient is very very small compared to a single derivative. So, the overall equation
that we get this is called as a Linear Euler’s equation; this is rho times del u by del t
is equals to minus nabla time of p, the d V the d V cancels out here.
So, as you can see few portions of this derivation is what you study in the basic course of mathematics.
So, this derivation is just for the sake of your understanding, it is not a part of the
assignment, it is not the part of your course. So, it is not going to be a part of your assignment
or papers; but it is more for the sake of understanding. So, now, we have got these
two equations.
. So, the three equations we got; we got this
equation, we got this equation and we got the first this one equation. So, let us use
these three equations and find the acoustic wave equation. So, let us solve this first
one; del rho by del t nabla dot rho u.
Now, I am going to write this in terms of del s. So, we know that the condensation rate
is rho minus rho naught by rho naught; so which means what, rho naught s is equal to
rho minus rho naught. So, rho then becomes rho naught plus rho naught s; so it is rho
naught into 1 plus s, this becomes a relationship. So, del rho by del t can be represented as
rho naught times del s by del t. So, we have used this particular relationship and we replace
this del rho by del t by this quantity, and this is the equation we get. So, now, let
us derivate this, let us differentiate this equation with respect to time; when you differentiate
this equation with respect to time what you will get is, differentiating with respect
to time the same equation becomes, this one becomes rho naught.
Now here the mean, this rho naught is assumed to be independent of time and space. So, what
we are assuming is that, we have a homogeneous medium. So, all this equation we are deriving
with the assumption that the medium is homogeneous throughout. So, the density, the bulk modulus
it remains the same throughout irrespective of what point of space you are considering.
So, irrespective of, it is independent of time and space. So, since rho naught is now
independent of time or space. So, in that case if you differentiate it you get is; rho
naught del square s by del t square plus nabla times of rho into del u by del t is equal
to 0. So, this is the equation you are getting.
Now you differentiate this equation. So, this was the equation rho del u by del t minus
nabla times of p; if you differentiate this equation with respect to space, so you are
applying nabla dot operator both on the left hand side and the right hand side. And nabla
dot nabla is represented as the 3 D Laplacian operator which is minus nabla square. So,
this is the equation you get; nabla dot rho del u by del t is equal to minus nabla square
p that is a equation you get, when you differentiate it with respect to space.
Now this quantity can be equated. So, this quantity is equal to. So, which means that
minus nabla square p is same as this quantity becomes minus rho naught times del square
x by del t square. So, we are equating the value of this quantity.
So, from the two equations finally, we get nabla square p is equal to rho naught square,
nabla square p is equal to rho naught times del square s del t square.
Now, we solve further. So, what we do here is that, we use the first relationship; we
had acoustic pressure as the bulk modulus multiplied by s, which is the condensation
rate. Now we know that the medium is homogenous; homogenous medium, this is our assumption,
is the homogenous medium. So, both rho naught and the bulk modulus they are independent
of time and space. So, both are independent of time and space.
So, this B is a constant. So, when you derivative it with respect to time; so what you get is,
del square p by del t square will then become this constant B times del square s by del
t square. So, we can replace this quantity as del square p sorry, del square s by del
t square becomes del square p by del t square into 1 by B. So, if you put now this particular
thing into the equation. So, the equation that you get is rho naught by B. So, we have
replaced this quantity with this value. So, it is rho naught by B times of del square
p by del t square which is going to be nabla square times p.
So, we can overall write something like this. So, what we do is that, nabla square p minus
rho naught by B is equal to del square p by del t square is equal to 0, this is the equation
we get. So, now, if we take c as under root of B by rho naught. So, this quantity becomes
1 by c square. So, the overall equation we are getting is nabla square p minus 1 by c
square times del square p by del t square is equal to 0. This is a very important wave
equation; this is called as the linear acoustic wave equation.
So, it is a very important equation and here the purpose of putting this in terms of this
is because; when you solve such differential equations, then you can easily get the solution
for this would be a sinusoidal function of this particular quantity. And that is why
we have represented this particular equation by replacing it and replacing it in this particular
form. If you replace it in this particular form, then the solution you get will be a
sinusoidal function with respect to c. So, here c is the thermodynamics speed of
sound.
So, as you can see overall c is thermodynamic speed of sound, which is actually this was
the originally equation, this is the equation. So, as you see the behaviour of the acoustic
pressure it depends upon rho naught and B. So, for a homogeneous medium if you can, if
you fully know this bulk modulus and density; then you can fully define how the sound wave
will propagate through this medium and that is why they are called as the bulk acoustic
properties. So, why are they called the bulk acoustic
properties? Because here we are assuming that throughout our domain of study, the properties
of the medium remain constant. So, both B and rho naught remains constant. So, when
we know these two quantities, we can define how the wave is going to propagate in a medium.
So, these are the bulk acoustic properties. Now let us, now we have derived a general
wave equation; the only assumption was that there was no mean flow in the medium and the
medium was homogeneous throughout.
Now, we will consider a specific case and that will be of harmonic plane wave. So, what
do you mean by a harmonic plane wave? It is a wave in which each acoustic variable;
whether it be the acoustic pressure, the acoustic particle velocity or acceleration. So, any
variable of study, it has constant amplitude and phase on any plane that is perpendicular
to the direction of wave propagation. So, that is the definition of a plane wave. So,
the direction in which it is propagating, you can take any particular plane that is
normal to the direction of wave propagation; then throughout that plane the wave will have
a constant amplitude and a constant phase. Now here we are introducing a new term which
is called as the wavefront. The wavefront is simply the surface where the waves have
constant phase or it can also be called as the locus of points with same phase.
So, in a particular waveform all the locus of a point having the same phase will constitute
a wavefront. So, I will show you a few figures and animations to make these definitions more
clear. So, you have to remember that in a plane wave that it varies; here the sound
wave it varies only in one direction. So, there is only a single direction of wave propagation
and perpendicular to that we have the wavefront where the amplitude and the phase both are
constant.
So, just to tell you a few examples; let us say we have a pulsating sphere. So, we have
a ball that is pulsating. So, when it is pulsating, then this is the kind of motion that is creating
throughout in 3 dimensions. So, is this a harmonic plane wave, if you freeze it over
time? So, let us say we have cut a plane here; this red line is the plane here red line.
So, this is. So, at any point of time the direction of wave propagation is radially
outwards. So, we cut a plane normal to the direction. So, you see that here at this point
there is a zone of low pressure; at this point there is a zone of high pressure and low pressure.
So, at different points the wave is undergoing, the wave is under different phases. So, this
is not a constant phase plane. So, because here the plane is not constant; here the plane
the wave front here if you draw the plane normal to the direction of wave propagation,
you see that at different points we have different phases. Sometimes the phase, at some points
the wave is undergoing a undergoing a low pressure; at some point it is undergoing a
high pressure and the phase difference becomes here pi by 2. So, this is not a spherical
wave.
This is a harmonic wave. So, what we see here is that, the previous example where it was
being generated inside a long tube and a reciprocating piston. So, this is the kind of waveform we
are getting; if this is the kind of this is a 3 D view of the waveform and it needs a
little bit of visualization. So, here as you can see this is the x direction. So, the wave
is propagating in this direction, it is going towards in this direction. So, if you cut
any plane this becomes the wavefront. So, if you cut any plane normal to this whether
you cut it here or there. So, let us freeze it and see; if you cut a plane here or a plane
here anywhere, so at every point within this plane. So, all the particles here they are
under the same phase. So, either here if you cut a plane here all of them are undergoing,
they are at the highest level they are at the peak. So, highest pressure, if you cut
a plane here all the points together will be undergoing a minima; all the points together
will undergo a maxima and then if you cut a plane here all the points there at the same
phase and the amplitude is also constant. So, this is a typical waveform of a harmonic
plane wave this.
Similarly, we have different types of harmonic plane waves; we have a harmonic plane wave
which is going towards a positive x, then we have a harmonic plane wave that is going.
So, here also although in this case the direction is in this way; in this case the direction
of wave propagation is somewhere here, this is the direction of wave propagation. So,
as you can see; if you cut any plane in this direction, so it is like x y direction, then
you will see that all the waves together undergo minima, they together they undergo maxima.
So, this is also a plane wave and the amplitude is fixed.
Now let us see a differentiation here; here also you have a wave and if you cut any plane.
So, this is propagating along this direction as you can see; this is the direction in which
the wave is moving. If you cut any plane normal to this, then the phase is going to be the
same; they are together undergoing minima and maxima, but the amplitude is different.
So, here in this phase if you see, the amplitude of this and the amplitude of this is different.
So, the amplitude changes over changes in the plane and the phase remains the same.
So, although here the wave front is; so here we have the same phase of this becomes the
wave front, but still the amplitude is not constant. So, it is not a harmonic wave. So,
we will continue with this discussion in our next lecture and will study more about harmonic
plane waves and the equation for sound propagation of a harmonic plane wave.
Thank you for listening.
