Hi Guys, In this tutorial I will show you how to create a flowing line wire work pendant. I will show you how to frame a stone using square wire. This design can be adapted to most stone shapes, such has oval or pear shapes. I will show you how to create the swirls, add a gemstone accent (you can use a drilled bead instead if you are not comfortable with setting undrilled stones yet).
We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits and or loose gemstones, frames for some of my tutorials, square/half round wire & more tutorials visit my web shop:
- 0.6 mm (22 ga) half round wire - 0.8 mm (20 ga) square wire
- 6 mm round CZ or gemstone - 20 mm heart, pear or oval cab
- 2 mm beads - 2.5 mm beads - 3 mm beads - 4 mm beads - 5 mm beads
Tools:
- Fine tipped flush cutters - Chain nose pliers - Round nose pliers - Flat nose pliers - Polishing materials
Hi guys, this is Nadja from Embodied Crafts and today I want to show you how to create this
flowing lines wire pendant. If you haven't already hit the subscribe button because I put new stuff
on a regular basis. I quite often make kits and pdf tutorials for the videos I put up on here
and I'll pop a link in the description below and I also have all sorts of gemstones, square and
some beads and all sorts of other goodies on my website. So check again over and see if there's
anything you fancy. Last but not least come and join us in our wire wrappers and metalsmiths
group on Facebook. I'll also pop a link below. Right let's get started. So we've got our
square wire and we're just going to take a bit of 0.6 and what we're going to do is
wrap this 0.6 around all of these wires make sure they're nice and flat and then
just wrap around the midpoint as tightly as you can and just make sure it's nice and flat
and that will kind of create the midpoint for the pendant like that.
Then what I like to do is kind of flatten it out a bit like that and that will grip
the square wire. You can see how nice it kind of lines up the square wire.
So next wires and I trimmed them off and I just make sure when I do trim them off that they are
cut off in the middle or rather on the inside of the wrap so that this trimmed off section
lies within where the stone sits so that it doesn't get snagged on any
closing or whatever later on. Let's flatten this out a bit and then we're just going to
find the midpoint and give this a bit of a bend like that. So next I'm going to
place some half front wire a little bit further up around about where I call it the shoulder
of the stone will sit. You can always slide this up and down at a later stage
if it doesn't sit exactly where you want it like that and then double check. So this is the stone
I'm using a heart so I kind of want it around the side here so that it gives me a bit of space to
bend this wire out to hold the stone and then also give it a stability on the side so I can
bend it over. So I want to bring it up a little bit more like that and then that will let me
bend the wire around the stone roughly where the shoulder sits. So I'm going to do the same on the
other side and then trim off any excess wires off the half round. Remember to trim it off on the
inside. All right so I trimmed off the wires and I kind of shaped the bottom a little bit to fit
my stone a bit better so now I can slide it in and just holding it in place like that and next
I'm just going to bend these wires around I can see that she needs a bit of adjusting still bring
up a bit just so that they are lined up.
And then we're just going to shape this around the stone so this is a little bit tricky because
it's not a it doesn't have a flat side so it won't let me shape it around the stone.
I'm going to do actually just do one side at a time in fact I'm just going to take it off
and do it by hand because it won't let me it's too the side is like a knife edge and it won't
actually let me shape it around it so I'm going to do is just bend this up like that for now.
Going to work, slide the stone in and then I'm going to bend these up on the side
just obviously make sure that you line these up like that so that they are symmetrical
kind of like that then your stone will sit in enough with a better grasp on it so that works
better. So now I'm just going to come in from the back and this will help me shape and just
make sure that you only grab the upper one the upper wire when bending this in like that and
that will help you hold the heart in place from the back yeah and that will work for now. So next
we're going to add some wire top to close this off here right so now I have lined up everything
the way I wanted to and I'm just going to close everything off with some 0.6 mm half round wire
which is 22 gauge. I'm going to start by wrapping it around the base and you can anchor it somewhere
in here to help you give a bit more purchase so what I'm doing is just the whole lot
pulling it as tightly as possible just the initial few just so that the whole lot is closed off
like that kind of line this up straighten it up push it down and then we're going to be removing the
top two bending these forward you can see what I'm doing
that no that's not it can't see which one is the front there we go these are the front two
so we're going to be taking these we're going to continue wrapping around these two
doing this for a bit until we have reached a good length you can use up all of the wire or
make it shorter it's entirely up to you so I'm just going to be keeping doing that all right
so I have wrapped a good bit here I'm not sure how long that is ruler so you can go longer shorter so
this is roughly about uh say three and a half centimeters which is about one and a half inches
roughly something like that um the next step is just to bend out these wires on the side
you're going to bend this over as the bail I'm just going to loop this in you can use a tool
if you wanted to I normally just use my my fingers to shape it I'm going to bring around
and bring the legs through the middle if you wanted to you can make this bail a little bit
longer I haven't used all of the half round wire to create it I could have gone a bit longer so
we're going to wrap these wires around the side here and then kind of pinch it down like that
straighten it up a bit like that one more time like that and do the same on the other side and
obviously straighten up the bail do the same on the other side so going to come around
through the middle like that
and obviously press everything down that'll keep these wires nice and flat
and obviously push these in a bit
and that's that now we're going to trim these off
so now I've straightened everything out and I've tightened it up so now I'm going to put the stone
and that seems to go a little chip at the bottom it looks nice place it in here and we're going to
close off so I'm going to take this aside for a minute because I've got better
kind of grasp if I come in from the side without the stone in place just give it a very slight
bend and you can mark the wire with um some coated pen or a felt tip pen I think you call it
here I can never remember grab the wire I'm trying to grab just the top one you can see I'm trying to
keep grabbing the the one at the bottom so once you've slightly got this bent out I'm going to
place this inside over the top I'm trying to grab and then bring it over the top so that then this
holds on to the stone from the front like that and then just obviously make sure that the back
is secure I could actually go either way it could be front or back because they both look the same
so now that's what it looks like all right so I've arranged it a bit more so I'm quite happy
with the way it sits so we're going to take some of these wires here I'm just going to go
create a swirl and we're going to go up through the bell like that and then come around
the top I'm going to do the same with another wire go through
the bell like that you need to create a little swirl just here and then go around
the bell
attach it at the top
like that so that one I'm going to follow the first one like that and then I'm also going to
attach to the bell
I'm going to trim this off it sits at the top like that and obviously arrange it
until you're happy with the way it looks
next step I'm not going to cut this off just yet never never going to use it
it's going to take one of the back wires and bring it through the front like that
just to give this a little bit of structure at the front and some support and go through
and then we're going to create some sort of swirl here
short like that just tighten that up a bit
using some round nose pliers for that
which I have here
just goes off a bit kind of fit it into grooves wherever it'll go a little smaller
and then thin out the tip like that and then just kind of create like a small little swirl
maybe bring this around a bit more
but you can kind of fit it into a corner like that and that'll kind of help keep everything
in place and then adjust it until you're happy with the way it looks so now I'm going to bring
down the front of the three wires left and just create some detail at the front I'm going to do
now set gemstone in the middle so you want to make sure that it's nice and round
and centered if you don't know how to set a little gemstone you can always you know use a
drill bit or something like that to put that there instead so at the moment that's what it looks like
so next going to take a gemstone and place that inside that's a six mil peridot so you want to
make the the loop just big enough so that the stone can comfortably sit in the loop but doesn't
actually fall through and also not so small that the stone is sitting raised up so if you can have
a look here on the side you can see that it sits nice and flush so now going to just wrap this wire
over the top and just take your time with that and do it slowly and the aim is to wedge the stone
in place it's a bit tricky here because this is actually quite loose still I'm going to try and
hold it down and kind of shape this over the top and as you rotate you kind of coil it
down and over the stone you don't want to cover too much of it
like that you just want to make sure that it doesn't go anywhere so you want to make sure the
wire goes over the edge stone so that can't fall out once
ideally you would have just a little bit longer because I really would prefer to be able to
tie this to the frame and I don't have enough here so I'm going to do later on is tie this down
with some weaving wire or some of the 0.6 that we have and because the way it is at the moment
that's too short for me to attach it to anything so I'm just going to coil it around a little bit
more over the stone and kind of place it inside so it can't fall out like that and then press it down
and then later on I will come in and tie this down there's some 0.6 weaving
half round wire I'm probably just going to use that to kind of stitch it to the frame so that's
what it looks like at the moment so I've secured this with some half round wire so you can just
use the remainder that's why I'm always hesitant to cut off any wires and because for me it's
always better to reuse wires in a design rather than add in because it reduces the amount of
you know wires that potentially could stick out so next I'm going to bring the last two wires down
and I want to bring these around the stone so I'm just going to bring these around the front
like that I'm going to create a tiny little curl of one of these like that
side and then create another curl around the front like that kind of like a tendril
then I'm going to follow the second wire like that and just going to
follow this all the way down and I keep reducing the size of the swirls
here down like so you kind of reduce the size of the swirls when you get to the bottom
and then this is a bit smaller I would have actually quite liked it if the swirl was a
bit higher up so maybe I'm going to adjust that to make the swirl a bit higher up so the way to do
this I can gently open it up just very gently you don't want to mark your wires or work harden it
too much gently unbend it very gently and then you can kind of bring the curve up a bit and then
roll everything up and gently swirl it in some more I just want to make sure you don't
rotate the wire too much like that so now I like that a bit better so press it down
okay so that's what it looks like at the moment so now we need to get rid of these
wires on the side here so what you can do is we need to tack these in here obviously you don't
want to bark this up too much so what I do here is I open up these wires here and I'm going to
bring these round I'm going to start with the top one first and kind of wrap it around
I'm going to create a little hook then you can kind of hook it onto one of the wires
through and then kind of twist it in and you don't need to go around it 20 million times
just once is enough because obviously there isn't any tension going on
on that wire it's not load bearing or anything like that so we're going to do bring this through
and then round and squeeze it you don't want to bring this too much out of shape so you can gently
bring it back and then arrange the other one the other one should be easier to manipulate
because it's not obviously being shaped I'm going to do the same and kind of feed it through and
you can rotate it and gently squeeze as you go along and that will kind of bring the wire through
and then you squeeze it down you can bring it back and arrange it
kind of in a flowing motion like that and obviously once you've finished and you're
still not happy with the way the wires look you can now come in and kind of change the shape
it's not all set in stone once you've finished you can still come in and arrange the swirls
whichever way you like I'm not really like the look of this so I may change something here
and I'm probably going to arrange something here so I'm going to be doing that so I've now
oxidized the piece and I polished it up which is something I always like to do before I actually
add my beads and just because obviously the copper beads will eventually also tarnish just
like the rest of the copper but I just like to have the initial shine of them so I add them after
I've oxidized and polished the piece so I've reused some of the 0.6 22 gauge half round wire
which is another reason I just don't cut it off because you never know as I said so many times
before and I'm just going to see where I like the look of the bead so I thought it would maybe look
quite nice if I brought the wires around the stone and then kind of slide them in a bit
and see what it looks like that kind of thing so I think that looks quite nice so you can decide
wherever you want to put your beads you may want to add one here maybe one at the top just wherever
you feel like they look nice and then once you've added them in obviously attach you know the wire
anywhere to the frame and then trim up and that's the whole pendant done I really hope you enjoyed
this and as I said earlier I've made a kit for this so you can find this on my website or on
my Etsy shop alongside all sorts of other goodies like copper beads wire gemstones and amongst other
things and if you feel like it come and join our artist group on Facebook which is called wire
wrappers and metalsmiths worldwide we're a fun bunch and get up to all sorts of interesting
things in the group and also if you feel like following me on any of my social media I've got
Facebook Instagram TikTok obviously my YouTube channel and I'll pop a link again description
below all my handles and all my platforms are or is in Barney Crafts so just follow that and
find them there and that's it for me thank you so much for watching hope to see you next time