How much FORCE does your LEASH have when you fall off a highline?

HowNOT2
100 followers
Sep 19, 2018
I did what I do best at and fell off my highline! But I put the dynomometer between me and the leash to find out how much force the only NON-redundant part of our highline sees.
CHART IS FOUND ON https://www.hownot2.com/hnth/slacksnap
Please support this channel at https://www.patreon.com/howNOTtoHighline
Find slackliner friends from this list of 1300 facebook groups at: https://www.hownot2.com/slacklinegroups
Do you actually know how much force you put on a leash when you fall off a highline?
Check it out on this episode of How Not to Highline.
Hi, I'm Ryan Jinks and welcome to my gear room.
We focus a lot on the forces of our anchors or our webbing,
but do we really know how much force our leashes see?
It's the only part of our system that's not technically redundant
and I don't believe that a dynamic rope inside a tubular webbing is redundant.
If you tie in twice, that is redundant.
I actually didn't know how much force we put on our leashes,
so I put the dynamometer between my leash and myself and decided to go for a hop.
So we did this test at our midline that we have here locally and it's only about 30 meters long
and that's a good test because I feel when I whip there that there's more shock on my body
than if I'm on a big, big highline that absorbs my fall.
So I did three whippers with our threaded leash,
which is a nine millimeter dynamic rope inside of an 11 16th tubular webbing
and then I did three whips on the line with the dynamometer on the anchor.
So we know how tight the line is so we can compare to what our forces are on the leash.
Then I decided to take my 11 mil static rope
and go back out there and see if a static rope makes a big difference.
And you can see our charts as we go along
and you can see that we were playing with our slow-mo feature while we were doing this.
What's harder than climbing a leash?
Climbing a leash with a dyno where you want to put your foot.
This leash is a bit long because the dyno is added to it
and we just got about two kilonewtons on our first whip.
So let's try that again.
So we lost the hat on the second whip.
I've got, let's see here, 522 pounds of force.
So again, a little over two kilonewtons.
I'm going to shorten up the leash for my third whip just to see
how different after I take about one foot, one and a half feet shorter on my leash.
Wow, that was interesting results.
I've got 580 pounds of force, about 60 pounds more than my other two tests.
You can see here how much I shortened up my leash.
I could stand up fully, but I definitely could feel my leash.
So it's as short as we would ever tie it.
Okay, I'm pretty happy to be tied into my leash properly finally.
I almost got my finger stuck in there on the last whipper.
So the dyno is now on the anchor.
And right now we have 132 pounds of force,
which is about a half a kilonewton without me on it.
And then with me on it, what does it read?
396, 402, 412, 430, 464, 482, 498, 524.
What's the max force right now?
610, 1240.
Oh, shook the whole tree.
1234.
Okay, set it now.
Okay, it's reset at 626 now.
Wow, so short lines.
This is only about 30 meters.
Puts on quite a bit force than the line that we did at CRG that was 240 feet or 70-ish meters.
So bigger highlines are safer.
So I came back the next morning and decided to try an 11 millimeter static rope,
which is a bit different than our dynamic rope threaded stuffed leashes we're used to.
I just took my first whipper and I got just about two kilonewtons.
I actually have my taped soft shackle because you cannot cross load a soft shackle.
So I feel better about my setup today.
But this rope is excessively long.
I've never taken a whipper with a rope this long except when I rope jumped.
So now I'm going to shorten this thing up and take two more whippers at a normal leash length.
Okay, I shortened up my leash quite a bit.
You can see here how much I had to shorten it.
But anyways, I got 2.06 kilonewtons.
So it's interesting that I got the same results even though my leash is
probably almost half as short.
So I got 2.36 on that whip.
I did not have a fresh knot.
This has been whipped on once already.
So maybe that had something to do with that.
But we're relatively the same each time.
It's interesting that the length in this case hasn't changed anything.
So now I'm going to tie in properly and enjoy my freaking midline and stop whipping.
So we got about 2-ish kilonewtons on our leash regardless of which one we used.
Now you can see this chart on slackademics.com under my section in Slack Snap.
This isn't technically a Slack Snap episode because I didn't break.
But it's on there with our other episodes because that's where I put charts.
So go there if you want to study the numbers.
Now I do think that I got a 4 or 5 kilonewtons on my leash once before when I did one leash fall.
And I'm trying to figure out how to recreate that situation.
But my estimation, my hypothesis is that on a big, big highline like
200-300 meters that my force on my leash is 1 or less kilonewtons
because it feels really soft when I whip.
Now I found it interesting that our static rope and our
threaded leash ended up being around the same.
Even though it was a pretty short highline that didn't seem to absorb my fall a lot.
But it is my goal to put the dynamometer on our leash in more highline situations
so we can get more data to see how much force this sees in more situations.
So thank you to my Patreon supporters for donating $1 per episode.
If you like to see these kinds of episodes and the forces of things and what things break at,
please consider donating $1 per episode.
I am not trying to make money with this channel,
which is good because I don't think I ever will.
I do it because I love it.
But if you can help subsidize the cost of this little hobby of mine of making videos,
I would greatly appreciate that.
Now a little disclaimer from something I learned.
Don't attach things like this to your harness and your leash with carabiners.
You may have saw that in the video.
That was a terrible idea.
I did end up taping a soft shackle and tying the leash in directly,
which should have been obvious to me.
But even then, that's untested and you shouldn't do it.
And leashes in general are not redundant when you only tie in to one thing.
Therefore, you shouldn't highline.
Hey, thanks for watching.
But don't be an idiot and complain that I used pounds of force instead of the metric system
since I gave you a chart on slackademics.com.
I mean, I mean, don't be an idiot and go read your first highline
without going with someone who knows what they're doing.
There are too many slackliners out there today to try to learn this stuff
from some guy on YouTube.
Since you'll be on Slackademics to see that chart,
swing by our group list that Kim put together of 1,300 Facebook groups from all over the world
so you can find a slackliner near you.
And check out the churchofslacklife.com.
It's where stoke people come together to share the stoke.
And the churchofslacklife.com has a YouTube channel of people sharing their stoke.
I was desperate for change and Slacklife really introduced me
to something that could be different.
So if you want to share your stoke, you can do that on the churchofslacklife.com
or you can send us a message on how you can get involved in being part of one of our videos.
So until you get a chance to find out more about leash forces,
check out our other videos.
And don't forget to subscribe, hit that bell button,
like or follow depending on what platform you're watching this on.
Cheers.
