Slackline Linegrip break test in slow motion with our finished Slack Snap 2.0

HowNOT2
100 followers
Jan 9, 2019
What a better way to have a grand opening than to break the single most expensive piece of hardware you can buy... A LINEGRIP.
If you want to see the history of all the different version of the Linegrip, check out https://www.linegrip.com/linegrip-model-archive-history-chronology/
If you want to buy a linescale, linegrip G5 or a Nano, visit https://www.linegrip.com/shop/
www.hownot2.com is a compilation of all slack education
Thank you to my patrons for supporting $1 per episode at https://www.patreon.com/howNOTtoHighline
The Slack Snap 2.0 machine is finally done
and in my garage.
It has a test bed of five meters long
and goes up to 222 kilonewtons.
We are gonna celebrate the grand opening
of the Slack Snap machine
by breaking the single most expensive piece
of slackline gear you can buy.
Check it out on this episode of How Not to Highline.
Hi, I'm Ryan Jinks
and welcome to my gear room.
We are going to break a line grip,
a G2 line grip on our new Slack Snap 2.0 machine.
I have worked on creating this machine
since we stopped using the yard and the trees
and my van to break test stuff.
And we designed this machine to break
up to 222 kilonewtons.
This is a nine millimeter soft shackle
that we did our final break test at.
And we had theories at what it would break at
and I'm glad I didn't do anything stronger
as it was quite scary.
It broke at 176 kilonewtons where the noose was
and it was quite violent.
And since it passed our test of 176 kilonewtons,
we decided to bring it home and pretty it up
and stick it in the garage.
We can always go beyond that later
after I catch up on all the requests
that you guys have made on things I should test.
Because most tests honestly are under 30 kilonewtons.
So we are going to do the grand opening
by breaking an expensive piece of slackline gear.
Technically this is not the most expensive.
If you buy a single long piece of webbing.
And if we want to be technical,
dynamometers are the most expensive single piece
of gear you can buy.
Now we're not going to break a dynamometer today
but we are going to use the line scale
in order to break the line grip
because they're made by the same company.
And I think that's just funny.
The Rock Exotica Enforcer by the way
is reads up to 20 kilonewtons.
And it's got a cool swivel but it is over $850.
Whereas the line scale is half that price.
It reads up to 30 kilonewtons.
It breaks up at 80 kilonewtons.
And if you'd like to nerd out on numbers like me,
he just developed a second version of this line scale tube.
Has a bigger eye, embedded battery,
Bluetooth, better Bluetooth and app capabilities.
So go to linegrip.com if you like to nerd out
on stuff like this.
But anyways, we're going to break
this single most expensive practical piece of hardware
that you can buy for your slackline.
So let's go into the garage and see this explode.
Okay, so this is my garage
and I was fortunate enough
to have the SlackSat machine fit in here.
I designed this thing in two halves to fit in my van
so I can transport it around.
It's not like transportable,
but I can at least move it if I ever need to.
And you can see how good it fits.
So let me give you a quick rundown on how it works
and then we'll break the line grip.
So I'm not gonna go into a lot of detail on how this works
because that's gonna be its own episode.
But basically the dynamometer, the scale
is attached to this giant shaft
on this giant 21 foot long rectangle.
The usable length of this is around 15 feet
or around five meters, which is quite big for a test bed.
Now most test beds are hydraulic
and that's probably the right way to do it.
But I like Amsteel.
I like pulleys because I'm a slackliner.
So we decided to make it a little janky
and create a 20 to one pulley system.
So my 20 to one pulley system is this block and tackle setup
that I made out of parts that I had
from my original ideas that didn't work.
A lot of thought went into this.
Anyways, there's a stack of five pulleys here
and a stack of five pulleys here
with 10 strands of six mil Dyneema
and 10 strands of six mil Dyneema.
And it basically pulls this 100,000 pound shackle,
holds it back and breaks the gear.
And over on that end, I have eight pulleys
on another giant shaft that stays stationary.
And I can adjust the length of where this starts at.
So the winch in the back only has to spool in a little bit
to break my samples.
What's nice about having the machine in the garage
is that if you guys want to see something break,
just let me know and I'll put it on my list of things to do.
It's a lot more convenient to do this here in my socks
than to set up the whole break test machine
like we had before, where I would literally create
a two to one on a two to one on a two to one
and pull that with my van.
That was a very limiting setup.
This, I plan on doing over a thousand break tests
and it'll be a lot of fun to do the first one
with the LineGrip.
Michael's going to install our first webbing
that we're going to start as a sample.
It is tubular webbing because in theory,
the LineGrip should be stronger than this.
And then we'll work our way up to stronger
and stronger webbing until we break the LineGrip.
Tubular webbing broke at 18.99 kilonewtons.
That was in the back of the web lock.
Tubular webbing has a lot of kinetic energy
and it is very dramatic when it breaks.
This, other than getting maybe scratched up, is just fine.
Let's try type 18 and see what that's going to break at.
Okay, type 18 broke at 21-ish kilonewtons
in the back of the web lock.
Back there, just like always.
Pretty consistent with results I've gotten.
Maybe a little less than the best I've ever gotten
in the past.
This is a used piece.
FYI, I mean, it's not a bad, bad piece,
but you can see it is a used piece.
Yeah, it's a pretty sturdy thing.
This is a high quality grip.
If you're doing long lining in the park,
this is the kind of grip you want
because it's durable as hell.
And this is the G2.
This is only eight kilonewtons, as you can see here,
is the max load.
Obviously, we just took it to 21,
but yeah, the G5 is 15 kilonewtons working load limit.
So it's even stronger than this.
Let's, looks like we're going to have to try spider silk
in order to get this damn thing to break.
So I used this to cover this.
This shut off, wow.
Good thing we had this other dyno on here.
Oh wow, so the, it broke.
So the spider silk breaks at 42 kilonewtons.
This did not go up to 42 kilonewtons,
which is 9,800 pounds of force.
Yeah, I'm glad we had two dynamomers on that.
Otherwise, we would have been super curious.
This probably got shut off from it whacking itself
or whatever.
But anyways, 6,800 pounds.
I'll have to do the math in a minute.
Oh wow, oh wow.
Okay, it breaks right there.
I asked Andy where it broke and then I told him
I wanted to keep it a surprise.
Well, I'm surprised.
And it broke there.
Wow.
It's the same spot?
Oh yeah, it came off that.
Interesting, I thought it was going to break right here,
but I guess it's thinner right here.
Yeah.
Yeah, it broke, so it was connected to the side.
Interesting.
So this officially broke at 30 and a half kilonewtons,
which is pretty good because the MBS,
the minimum breaking strength, is 25 kilonewtons.
And what's interesting about MBSs
is when I'm using ropes and webbings,
it always breaks lower than the MBS.
And when you break things like carabiners or metal,
it breaks, hopefully, above.
Because you're not punished for how you use this,
whereas a rope and a webbing, every time you tie a knot,
it lowers its breaking strength.
So anyways, I'm pretty excited about that it's stronger
than its MBS of 25 kilonewtons
when it broke at 30 and a half.
And the G5, the one that he's going to mail me
because I broke this one,
is a 45 kilonewton minimum breaking strength.
So it's almost twice as strong as this.
It's working load limit.
In order to stay safe, you're not supposed to exceed.
For this one, it is eight kilonewtons,
but the G5 is 15 kilonewtons.
The Lengrip was the original slackline webbing clamp
back in 2010, and there's been 20,
over 20 generations since then.
And you can go to the link I put in the description below
to see the history of all the different versions
that he has made.
The one he sells today is the G5,
and that is 193 euro or around 200-ish dollars.
But he also has a smaller, lighter,
cheaper version called the Nano.
And that is around $100.
And that is perfect for something like a highline
where you're just putting a grip and a line slide on it
and doing a Buckingham three-to-one tensioning method.
So you have those two options if you go to Lengrip.com
and need to buy a grip.
So there is our grand opening of our new Slack Snap machine.
Send me ideas that you want to see broken.
I already have a list of things I want to do,
but I want to hear what you guys think we should test
because it's a lot easier for me to do so now.
I appreciate my patrons.
In this case, Lengrip, Andrew Riedrich,
did sponsor this item,
but the machine did cost over $3,000.
So I do appreciate my patrons
because I could justify doing that
because they support me with $1 per episode.
I'm also interested in testing used gear.
And if you've got used gear that you're done with
and really curious about how strong it might be,
message me and maybe you can send it to me
and I'll start collecting that stuff
and we'll do a whole episode
on different kinds of used gear.
And if you guys are interested
in making a how not to highline video,
if you have spent a long time learning something
and putting together a project,
maybe you can film it
and we can make a whole episode about it.
We have some people working on that right now
and so we can mix it up on this channel.
Message me if you're interested in getting involved.
And as you can see, gear is not invincible
and there is a very small chance something could break
and you might die.
Therefore, you shouldn't highline.
Hey, thanks for watching,
but don't be an idiot and try to set up
your first highline by yourself
without going with someone who knows what they're doing.
I am considering starting to offer classes in the spring
and I was wondering if you guys would be interested.
So if you could leave in the comments below
or private message me if you're interested,
what level you'd be interested in,
multi-day, single day, and give me some feedback
and we'll see if we can set up
some actual lessons in person
so you can learn the way you're supposed to
before you go do some risky activities.
But until you get a chance to come on a class with me,
there are over 100 videos on our channel
and slackademics.com has literally, literally
everything else you can learn about slacklining
from the internet.
And until you have time to check out all of that content,
don't forget to like, follow, or subscribe
depending on whatever platform you are on
so you can get our latest episodes
which come out every Wednesday.
Cheers.
