1 Video View·Sep 11, 2019
How on earth does a 2km long highline get rigged? Watch the process on this episode. The world record long slackline was in Asbestos, Canada set up by Les Funambules Modernes.
Thank you Michael Madsen (@magicmikeadventures) for the drone footage and Nick McPhearson (@nickgoeswild) for editing.
Dany Bouchard (@danybchard), Heidi Blais (@heidiblais), Spencer Seabrooke (@spencerseabrooke), Mia Noblet (@mianoblet), Lukas Irmler (@lukasirmler), Camille Langlois-Barriere (@that_girl_with_the_sunflowers), Liz Thomas (@lizasouras) Julien Desforges, Anthony Boulay, Renaud Vézeau, Ludovic Tardif, Michael Madsen, Ari DeLashmutt, et Caël Trudeau-Cauchon, Mat Bas Félix Paradis, Nicolas Husson, Matthieu Plante, Karine Lequy, Thierry Leroux, Adiact Valladares, Dominic Bouchard, Danick Pellerin, Cinthia Duc, Fabioloshky Martinez, Axl Ch, Maxime Pelletier, Audrey Noémie, Matthew McMillan, Ryan Jenks, Heidi Blais, Thomas Courtois.
MAIN RESOURCES WEBSITE
https://www.hownot2.com/
SLACKLINE GROUPS
https://www.hownot2.com/slacklinegroups
BOLTING BIBLE
https://www.hownot2.com/boltingbible
BOOK OF SLACK
https://www.churchofslacklife.com/sacredtexts
T-SHIRTS
https://slacklife.threadless.com/
BECOME A WEEKLY SUPPORTER ON PATRON
https://www.patreon.com/howNOTtoHighline
DONATE ON PAYPAL
http://www.paypal.me/slackcessfund
QUESTIONS?
Private message me at https://www.facebook.com/ryan.jenks.35 or ask about private lessons
All donations go straight back into making this channel better. We put donors names in the ending credits and give them exclusive access to the SlackSnap Raw Data spreadsheet + corresponding footage associated with each break. This all couldn't happen without you!
Would you like to know how to rig a two kilometer long highline?
Check out how we're pulling this line across on this episode of How Not to Highline.
Hi I'm Ryan Jinks and I am in Asbestos in Quebec Canada
and today we are going to pull a two kilometer long highline all the way over there.
I'm really really happy to see you all here.
It's been like months and months of preparation a little bit.
This is a very very special event.
It's nothing like all other highline gatherings.
The mission is to use this mine to give it another purpose.
This mine was used for about 100 years to mine asbestos.
And asbestos is a very dangerous mineral to use and we all know it.
And so when the mine was closed a lot of jobs here were lost.
A lot of people had to move out of the city and leave this big mine here without any use.
There was a lot of news in the press about how bad it was to have this in their backyard.
And you know when your city the name of your city is always in the press with negative news
it's kind of a it's hard for you to be proud of where you're from.
And they were always trying to find new ways to bring new people new people
new energetic people with projects especially around this mine
because this is the heart of the city basically.
And Danik the owner of the microbrewery that's on the other side of the street
he is from here and he really has his city in his heart and he wants to see nice things happen.
And he was talking with my my dad they were brewing beer together
and trying to brainstorm on how they could use this mine.
And my dad was like well my son does highlining
maybe we should he should put a highline in there.
And then it took like one year that he was like pecking on me
and always begging me to come and to visit and to check it out.
And then in the end like after a year we came with Julian and Camille was there and Felix
and and Max was there and a bunch of us came and we visited the mine
and we just understood the size of it.
And we saw also that there were very little possibilities
unless a huge line that would kind of grow across it.
And so we contacted them and Julian and I we talked with the city
and then we decided to pitch for the longest.
We said we're gonna come and and put the two kilometer long highline in your mine.
But what I want us to understand with all of that is that
us being here is an invitation from the city for us to be here and to make it shine you know.
So we are here we're gonna put up a two kilometer highline.
It's gonna be epic.
Everybody's gonna have fun.
We're gonna have our two midlines here.
But everything we do all of our actions we have to think does it
does it help to build a positive image of the city.
So I'm gonna summarize here kind of now that I've been here about a week
how the rigging basically goes how they set this stuff up.
All the people right now on the team are getting ready for their positions
and getting their stuff ready.
We got cap stands for that side a secret weapon they call it
which is a giant cap stand custom made for this side.
And huge telephone poles that you can see right there that are going to hold the anchor up.
So it can clear this mine because this mine is very stair-steppy
and a lot of work has been put in so far.
The anchors are built and right now we're going to pull the line across
and we're going to take you on the journey of what that takes.
While we wait for the teams to get in place let me explain the anchor real quick.
It's these concrete blocks that had to be positioned very carefully because
this c-channel had to be lined up and we got two bolts per block and down here
made a weld right here in order for it to have an I-beam shape and so it doesn't bend.
It'll just crush the concrete right here and then we have a span set coming off of it
to this rigging plate and obviously another span set here.
Just one rigging plate and it's going to this is going to basically hold all the tension.
Now there's going to be adjustments and stuff going on here but this is basically the anchor
these are not going to move.
It does put quite a bit of force on the first bolt but that first bolt is plenty strong
and it just keeps the whole thing as one unit so it is heavy enough that it doesn't move.
We don't need all six bolts to equalize here but um yeah I don't think we're moving this thing.
All right Matt explain explain your anchor and what your anchor even goes to right now.
So this is just a guide wire anchor it's four blocks of concrete that have a rebar placed
and then there's individual strands not a classic vfk going to it just sort of equalizes better
supposedly and uh yeah just two ropes sharing each carabiner individualized strands with figure
eights homemade uh oh yeah homemade rigging powder coated with rust yeah and gave it gave
it some good texture and color you know and then it goes to another steel locker that's
going to go to this single rope uh well I think it's going to be doubled actually no no it's going
to be single rope if we have extra we'll double it it goes to a sort of like prussic wrapped uh
um span set that then the other side of the span set goes to the other thing that is exactly like
this the other and what are these what is this intended for this is just a guy wire to keep the
thing from shaking too much so this side is only going to be about four meters up
yeah this side is not going to be so high because if you walk over there you can see there's a drop
off right on the other side of the hill and we're not we're not super worried about level do we even
know matt what level is no we don't i've never checked it but it's irrelevant yeah
yeah exactly because of the sag and everything it doesn't even look how much how many meters of sag
it's about 60 meters of sag okay so if we were five meters off level even 20 wouldn't look like
the webbing that we're using for this project is the y2k webbing and it has
normal sewn loops of course on the ends but then right here is where they attach the backups
and they put a quick link between these two loops and then put the backup webbing in there
the backup webbing i believe is 53 meters and the main webbing's 50 meters so it's actually
custom made to be used in this system they actually don't make y2k webbing longer than 50 meters
and this backpack you can see here is full of let's see here from a to b
750 meters of webbing in this bag we have a stack of bags right over there and this is flaked in
such a way that it's taped on the shoulder straps right there so they know what side's top and what
side's bottom and b for bottom p for top and it's uh pretty well organized they had a huge taping
party here for the last two days and everything had to be triple checked to make sure every quick
link was locked off every pin was pulled out of the webbing and everything was super flat so
it's ready to be pulled over
and then we just tape like one side so that we don't end up cross-loading it
so it's really just for the webbing to stay in place last year we had nine and this year we have
eight and it should work very well with the medium selectivity rings is that what you're
using is medium selectivity rings i think we'll have the big bomber rings as well but also the
medium selectivity so what happens when you tape it this way so this one is a connection from
the main line to the next piece of main line how many wraps are you doing with the electric tape
i think about three maybe sometimes four okay and can you put the fiber tape directly on top
oh yeah we put the fiber tape directly on top we're not exactly sure but we had
the tape kind of roll and not stick very well and i don't know if it's something to do with
the humidity and the heat here but we found this was the quickest solution to keep taping
and get something that works and slides very well nice and yeah nice all right
what's your spacing i do between eight and ten of these okay i don't know a bit more than the meter
we want we're aiming for four to five tapes per 50 meters okay and you have 40 sections
so that's 200 tapes yeah i guess the way yeah 200 tapes it's not that bad it's probably like
but you got to make sure everything's super flat yeah all right forgot to count this one i think
so slider electric tape three or four wraps i like that with the fiber tape over and then wait
might be nice because i think it makes the fiber tape a little further from the line fiber tape so
strong that maybe this is nicer to have directly contacting the webbing than having something
that's stronger and sharper but it's all all kind of experiment so there's these little frillies
on the bottom of the right here so we like tape those so that they don't snag the leash yeah
and then we do big spacing i like doing that so i can see
see it and then we super duper tape and we like are supposed to maintain tension as much as possible
for this part so it doesn't go go back do a little more right there
and then do it back just on top of it because oh okay yeah
you have to make sure you wrench tighten the
oh my gosh no open rapid links
why i guess they're weak when you don't screw them in or something
i hear they're strong they're made they're metal they're bomber yeah
all right everybody all hands in the middle
that's bigger than i've ever rigged
you don't pad your webbing before smashing it with rocks danny sometimes you gotta go a little
all right so our webbing starts here and then this rope will be pulled
up so we don't drag it through all that crap
wow they get really steep after this yeah all right so we've come halfway down which is where
i'm at halfway down right now and uh they're hiking the rest of the webbing down to the lake
there's two rebar hammered into the edge of the water and the boat team is pulling over webbing
and connecting those water bottles to it as they go and it looks like at every 50 meter mark is
what they're doing there's already a rope at the base at the water line over there and because it's
so steep and so hard to manage the webbing on that side that they're going to pull the webbing up with
a small capstan that they brought over there not the giant secret weapon we have on this side once
they pull the webbing up uh to their side they'll fix it like a normal static side side b and then
they're gonna start to pull it up this way and that's where why we stay here is to help hold
this webbing up off the rocks um or try to try and do as little damage as possible and then
they're only going to tension it just a little bit so the boat can come back and take all the
water bottles off so no one has to line slide two kilometers with 20 bottles hanging off their
harness okay so everyone's in position right now we're basically anywhere the slack line is rubbing
the rocks we've got lifted up the boat is going back you probably can't see it from here and
removing all the water jugs uh the secret machine the big capstan on the a side the one
we're going to tension with it's all everything's already installed everything's uh already in the
kootenai carriage which is on that pulley so we can go up and down with it um but they have to
capstan the rope that goes from the b side anchor down to the lake because there's no way to keep
the webbing off the rocks there so as they pull that up it'll keep it off the rocks because
there'll be tension added as they do it but that's only going to add like a portion of the
tension we need and then we use the big big big big big capstan we have on this side and we're
actually almost done this actually isn't that part of a process we were a short 50 meters or 100
meters when they were taking the webbing across the lake um so they just robbed peter and paid
paul and we pulled this one and they added something on that side so but um i mean overall
the magic is in the prep just like most highlines so um i mean they taped for three days and plan
this for six months so this part of the process is just uh going through the motions so hopefully
this goes well okay so there's 300 meters between me and the next person down there
and they have to remove all the water bottles still
uh the sun is shining through the clouds in the rain right now
how's it feel it's ******* heavy because it's also wet
how you doing liz
uh at least the sun will come out soon yeah after we're wet oh the view is amazing
oh shit they just got the last bottle off and the line goes all the way from here to the boat
and it's just on on a shoulder and a knee and on liz liz you're so strong
now the the rope's too wet in the capstan to actually pull it up properly so
i guess we're gonna have to be here all night matt what is this
that's the that's the solution that's the solution that's a sacred weapon that's a
prototype for any rigging issues we had last year about tensioning about um
down rigging it as soon as possible in case of pretty bad weather
so that's the slack machine
here it is
so that's uh that's a couple of weeks of work on trying to build this do you have a portable version
with a chopper
i would add like many hundreds of hours of work matt designed all of this in autocad and designed
every single piece in this apart from a couple he bought like the engine he did not build the
engine everything here was custom made and welded by hand yeah every ugly weld was made by me and
every pretty weld was made by ronald yeah so what it makes what it does there's there are wraps like
but the problem is that a capstan winch the rope rubs against each other loop right so it doesn't
go over itself because it's thick with the line it will go over and over and over again so it
will make just one stack of webbing which we don't want we want to separate the webbing
so i will avoid all technical like kind of blah blah blah around it but we managed to make two
drums separating each turn within like the distance of the two drums so it runs around it
and then it comes it comes out free on the other side without any tension like the regular capstan
i got
this is just a different game of tensioning so let me explain the secret weapon real quick
it's basically a giant capstan and this keeps all of the separate webbings um all the webbing
separated and we have to manage the backup and pull uh it tight which is why we are so far back
from the anchor now we have 50 meters between the pole and the capstan here in order to pull all the
slack out of the backup uh wind it up tape it in place so it becomes one unit and then run it
through the machine and if we have to de-rig on thursday which is four days from now in order for
a storm to pass uh this their strategy is that they can de-rig it in a few hours and re-rig it
pretty simply uh in order to not lose the webbing and continue the festival now uh we will have to
do the we will have to scrunch up the backup and tape it as one unit for 40 pieces uh if we have to
do that it is a little bit of work but um it is the most consistent they can get with this machine
hey matt what happens when three riggers are bored uh you build what's called a post-apocalyptic
backup that's what we did here so this is our main anchor or anchors and and this this by the way
makes uh that redundant we backed it up directly so okay and so yeah like we have to be here
watching the line watching the anchor anyway so we had some materials and we went back to that rebar
and made a sliding eye and then a soft release and then you take it to the terminal shackles
of the line yeah so in case we have a post-apocalyptic failure we we're still connected
yeah yeah so we basically got the line up yesterday but uh we're at anchor side b
finishing up this side and we realized that this second pole the pole we're not using to pull on
for our anchor has a lot of tat a lot of old metal electrical stuff on top and it's hanging
right over the high line and so we're gonna do what any good canadian would do and cut it down
good thing every canadian's a lumberjack uh the problem is we don't want it to fall on
our already existing setup and of course obviously not the high line so we're going to
throw a rope up top and we're going to tension it we're going to cut a little we're going to
tension it and we're going to ******* run when it starts to fall we got to make sure it falls
down the hill or at least uh away from the slack line we kind of have to remove this one anchor
side the stabilizer in order to prevent damage to it but yeah this is uh this is something that
is started was yesterday going in the wind and moving and they realized it was something that
needed to be taken care of today so uh just little details little details that we normally deal with
when we have high lines uh except this is bigger and so the details matter more anyways how often
do you use a chainsaw to uh detail your anchors you look stressed no it's just the morning you
don't cut a tree down every day every tree this was a tree a long time ago it was a tree
yeah it's not the wood it's not the cutting of the wood that scares me it's the
the metal dangling above your head as we cut it
that it is well parts of it are already i think it's dangling over your head when
yeah you know it's not hanging it's not dangling over mine yeah it's too bad
yeah it'll be fine it all works out in the end it always does this is scary
yeah it really is i'm more scared of this than like anything else we're doing here
yeah i guess so right coming back i'm like yeah we just get a rope over the top of it
give it a good pull that way as long as nothing breaks and falls off
on me then it should all just go with point
yeah right as long as we're pulling the top that way and we cut it right there's no way
it could fall the other way if you have four kilonewtons pulling on the top you got your dino
yeah dino one dino two don't they max out at like half a kilonewton
but together i get one wow what are you gonna do with the van
it's gonna apply tension to the top of the post while i try and cut it to make sure it
goes the one direction what are you what do you plan on doing when it starts to go
get to a safe place you're thinking about turning off the chainsaw before you run or after
no you hit the brake on it and then just go like the kill switch is secondary you know that's what
i would do yeah if i knew how to use chainsaws fast things happen you know sometimes things
happen fast sometimes things go pretty slow when it goes slow you can play it cool but
when things go fast nobody plays it cool
go go go go go go go
oh
tell us how you really feel
oh i'm so happy we did that good
let's check out my cut look at that it didn't hit this no no it bounced back that's what it did
we nailed it oh good oh god i'm sweating so much
we have been watching the weather constantly so we know if something's coming so we have
a full four or six hour window in order to swap the line out with rope what is this Liz
this is the rope that gets sent across if we have to do a fast d-rig due to weather or
basically just weather so this is our d-rig rope we replaced the high line with this rope so this
is two 2.2 kilometers of rope and just figure eights connecting the figure eights connecting
every end 2.2 kilometers it doesn't seem like that much in here oh my god it's like a foot oh is it
like super deep oh my god wow that's pretty heavy never mind never mind personally stacked
all of it into the trailer um so the idea is that we would send this line across
and then re-rig the high line exactly yes but what about actual d-rig because you guys just
do that with a knife each time right that's how they d-rig all big lines these days um
do you use the rope and then drop the rope do you drop something
no no idea yesterday they were building the the big wheel yeah it's gonna be the friction
and just lower it yep no we will swipe the webbing with the stack machine
okay so you replace all the webbing like normal like a normal d-rig
and then you drop your tag line but it's
and then you drop that and pick it up yeah or maybe we'll put some tension
because you don't want it to drop in the water without the bottles or something
don't lose the top because you don't want to pull from the bottom
no yay yeah at the end of the day the slack machine does not stay connected into the system
it is uh available in order there needs to be a quick d-rig where it can pull the webbing in you
transfer the the master point up here at the top of the pole down to a uh intermediate 50 meter
section of y2k webbing that is already in the system you basically take that webbing that's
already embedded in it connect it to the master point soft release they don't actually have a
soft release on this detension it get off the web lock and then once it's being held up by the
kootenai carriage that's on the pulley system um it can you can raise and lower that that fulcrum
point that goes down to that slack machine and they can just suck the webbing in if the wind's
got high and protect the webbing and just let a sacrificial rope get blown around they also did
this event a little bit earlier in the year where you don't have hurricane season because basically
it was a hurricane that it was the tail of a hurricane that blew the line apart last year
what i love about segmented high lines as you all know i love segmented high lines as all my pieces
are in 50 meter sections now is you can rig things like this without being sponsored um
you do want to make sure your loops are really well done that you're not just doing them at home
if you need me to break test some loops for you i will if you're not sure that they're safe because
if they break you're gonna die so message me if you need me to do that for you um but really the
sky is not the limit when uh you do segmented lines or we're also going to be working on
segmented nets it's nice to have smaller bite-sized pieces that you can just combine
in order to do projects like this this is a bitch to set up and a lot of work to walk
therefore you shouldn't highline hey thanks for watching but don't be an idiot and try to go
highlining your first time without going with somebody who knows what they're doing there it's
not rocket science but yeah you could die if you do it wrong uh we have a school coming out really
soon might be out by the time you see this episode let's go to how not to highline.com and
you will see highline university international highline university is a to z everything you need
to know in order to highline because this channel is all over the place and we kind of get into some
niche stuff so the h0 course is going to be available in a few weeks that is how to use a
highline that's already rigged it's a great course to take before you go to a highline festival
there's over 100 videos pdf and it comes with a teacher where you submit videos
homework to the teacher to get a certificate of completion that you have completed the course
so it's very interactive i'm trying to bridge the gap between online and in person by giving you a
person online so check it out at how not to highline.com if you want to find slackliners
near you we have over 1300 facebook groups on slackademics.com that are from all over the world
so you can get connected to this awesome community we also have the bolting bible
on slackademics.com a great resource if you want to bolt we are doing so many things on this channel
right now make sure you like follow and subscribe on facebook youtube and instagram because i'm
posting different stuff on all the platforms all the time so you don't miss a thing cheers