Yes I moved, Yes we removed this concrete. Almost done releasing episodes from the old house!
Bobby visited Fixe Hardware's Bishop, CA store and they showed him their new hanger which is a result from the new standards in Europe since PLX has come and gone. 3.5mm round stock (instead of 4mm) with rounded edges and a concave feature with dimples to act like a built in lock washer. So... thinner and fancier and a better stainless. Hangers in this episode - https://fixehardware.com/index.php/016-3-8.html Bolts in this episode - Simpson Strong-Tie Titen HD Concrete screws --Zinc Plated https://amzn.to/3rd5Wqb (DON'T USE ZINC PLATED FOR PERMANENT ANCHORS) --Stainless concrete screws https://amzn.to/2OX2GC5
00:00 - Cheesy Intro 00:21 - Concrete slab moving again 01:07 - All about the hanger 04:22 - Bolt Buster Hydraulics 05:53 - Break Tests Begin 08:31 - Concrete Screws 09:50 - Final Break Test 10:44 - Closing up 11:34 - Annoying ending
BREAK TEST RESULTS MBS - 25kn *Installed Offset (not oriented straight) - did not spin to correct orientation before deforming but broke stronger ***Sample 321 - 39.06kn (8,781lbf) ***Sample 325 - 39.34kn (8,843lbf) *Installed Straight and Proper (yes it was lower, but higher than MBS) ***Sample 322 - 30.08kn (6,762lbf) ***Sample 323 - 29.06kn (6,532lbf)
Fix has some new products coming out and we're going to show you about those but first we're
going to fix our concrete slab. Check out all about it on this episode. Hi I'm Ryan Jinks
and I'm Bobby Hutton and we're fixing a lot of things today. We're going to do fix hangers and
we're going to fix the concrete. So we were doing some tests on bolts that we installed a few months
and we noticed something was wrong. The grass was moving again and we want to test about 12 more
things in this concrete before we take it out which we'll cover that in a minute. We are going
to add an aluminum bar between here and here some scrap metal I have to keep the thing from moving
and hopefully it'll compress that and break our stuff. You think it'll work Bobby? We'll see.
Bobby knows a lot more about these than I do so maybe we can get him to stop shoveling and
explain them to us. Action! I just visited Fix Hardware over in Bishop. They showed me a new
product that they have. This is their redesign of their super popular hanger. They've done a couple
cool things. One they've made them lighter. This is a thinner bar stock. I believe it's 3.5
instead of 4. The thing I'm most excited about is they have rounded off the edges in there. That
was always a complaint of mine is they had a really sharp edge here that would chew on your
carabiner. Probably the biggest change is it is a new material now. It is 316L stainless steel.
That's an upgrade. That's a little bit better steel than the 304 stainless that they have been
using. They had a duplex stainless, their PLX, which they can no longer use because it doesn't
fit in that standard apparently so they've switched to this. To be more educated we tried
to look up that standard. One is very hard to find and when I did find it they wanted to charge me
90 euros to look at the standard. I didn't look at the standard. If you want to look it up and
share it with us that would make us happy. Another thing that is a selling point I guess,
I don't know how well it will work, is there is a little dimple in this now. This is a little
concave down here and this is a little convex. The thought behind that is that it'll act as a
lock washer as you tighten the nut down or tighten the bolt depending on what you're using.
It will press it into the rock and then that resistance of the deformed metal will hold it
out and act as a lock washer. Other things that they've done, they've moved these little dimples
further away from the center and it also seems like this is set up a little bit more so as you
are wrenching it down you're not banging against the surface here. Fixes new hangers.
These hangers are pretty cool. They have a less sharp edge or a little concave for a lock washer
feature but it's a 316L stainless which is interesting. They've had 304 stainless and
they've had PLX and I like the PLX because they even though they were rated for 30 kilonewtons
MDS they were breaking above 40 and so when we needed to break bolts we had to use those hangers
because they were the strongest. Now I'm sure these are super strong enough especially if
meeting new standards and I like the fact that 316s will last longer than 304 and titanium is
near the ocean and it's nice that those are the new standards. It's really nice that we're
progressing as a bolting community and I think some things will still be available in the United
States because, well, maybe we don't care about standards as much. Anyways, that's a hell of a
lot of talking. We're just going to start breaking things. We're going to break three of these and
we're going to pull them in shear and let me show you the machine in case you haven't seen it yet.
We have a seven point anchor and it's holding a BFH, big fat hydraulic, then you got your pump
and your battery and got dynamometer. We're going to get a better one of these soon so we can
actually see the number as it's pulling right next to the bolt. We're going to probably place these
somewhere right here and hopefully the concrete doesn't move anymore and we'll find out when it
starts to deform. Sometimes it's between four and eight kilonewtons depending on the metal.
Fun fact, this episode was sponsored by you. Fixed does not sponsor this. Nobody sponsors us. We are
literally able to do everything through donations and I'm super grateful for those who have donated.
We're able to buy some new hydraulics for slack snap. We're working on a hundred thousand times
per second, a hundred thousand hertz dynamometer with a raspberry pi which is the reader and
really cool stuff. Drop test tower coming and we're actually taking this concrete out after
we're done with these tests today because we're moving and we're going to basically start doing
YouTube full-time. All your donations goes back into breaking stuff and research and I just paint
a few houses a year in order to dirtbag my way through life. So yeah, thank you for donating.
Let's uh start pulling. Did it straighten out? No, like look like that that dimple's in the
same spot as this so. Wow. It stayed. It stayed. I'm pretty disappointed by the results because
they dropped the mbs on this and it's not 25 kilonewtons. Let's take a look at it. 39.06.
That's nowhere near 25 Bobby. But I'm not too worried about losing the PLXs because
well these are pretty strong. We did get what almost 50 on some PLXs though. Almost 60 on some
of them I believe. We didn't go back and look. Yeah it's insanely strong but this this is pretty
damn strong. Sorry we'll get a better dyno without so much reflective shit. Coming soon.
Looks very very similar to the other break. Wow. Such different results. Let's go look at the
number. I haven't seen it yet. That's very different. Yeah. That's quite a variable.
It is still above mbs. I could get behind that or under it if I was climbing.
You're a metal nerd. That is what 3 16ths looks like unpolished. Something else I like about these
is that it's a little bit more dull and that's really nice. It's just not so shiny on a wall.
Let's see what number we got. Above mbs. So 29.6 means they can't exactly put 30.
Yeah but why did we get 40 on the one? Because we installed it wrong. Because when you don't
use products the way you're supposed to it makes them stronger apparently. So you want to break
another one. I don't want to break another one. We're gonna find out if installing them wrong
makes them stronger consistently. While Bobby's putting in the fourth bolt let me tell you about
what we're using as bolts. We just use these so often we don't even think about bringing them up.
These are 3 8th inch Titan HD concrete screws basically. I think Monty screws are common in
Europe. These specific concrete screws we have found to be pretty strong. These are zinc plated
but they do come stainless and the zinc plated ones because they're cheaper and we're just using
them temporarily they're one of the strongest things that we can put in and that's how we're
able to test all these hangers. And what's nice is they're reusable for us but we would actually
use them for like climbing routes. Some people think that a cold hot cycle can loosen them but
they're also easier to check inspect replace. So Bobby's used 3 8 stainless in an area that gets
very very cold and very hot and those pre-thaw cycles over several years. Yeah. Have not become
spinners yet so they have not worked themselves loose and we've pulled them straight out and
shear and they're super good. So let us know in the comments below what you think about these for
climbing hangers. Climbing bolts. You know what I mean. Tired whatever you know you know. Here you
can start drilling Bobby. Well let's just move on. It's a hanger. It did its hanger thing and
I can't believe that we're getting 39.34 10 kilonewton stronger.
When you clip it like. When you stole it wrong. Yeah. 10. 10 and they were both like within a
kilonewton. Both are two sets of data points were within a kilonewton of each other. That's 30%
stronger. Yeah. Put in the comments below why you think that's happening. I'm super curious. I
actually learn a ton from you guys when you put stuff in comments. Don't mix metals. So if you're
zinc. Don't use zinc in anything that ever sees rain and kind of is okay in the desert. Fix cells
zinc plated products. I mean they're great for inside gyms the zinc plated hangers but
basically don't use that stuff outside. It'll rust eventually and you want whatever project
you're doing to last longer than you. Make sure you subscribe because you're going to watch us
progress from this backyard over to where my welder is where he helped make me slack snap
and bolt busters and now we're going to build a drop tower that'll probably be like 40 feet tall.
I'm going to learn how to weld. It's going to be so much fun. So make sure you follow along
with what we're doing and don't forget to smash that like button. Cheers.