Fusion stainless steel climbing hangers bought from https://amzn.to/2JLoBq2 are rated for 30kn and broke at 31.10kn and 29.56kn and 31.22kn. They sell zinc plated bolts - please don’t use those outside! At over $5 a piece they are not really a deal. Tested with a Simpson strong tie TitenHD concrete screw from https://amzn.to/2WCBcBf in a ⅜” hole. Those are amazing bolts, especially if looking for a temporary anchor (assuming you can use power tools legally - not national parks). Please don't bolt if you don't need to and use titanium if near the ocean and never use plated steel bolts outside. With Bobby Hutton
HIGHLINE UNIVERSITY INTERNATIONAL www.howNOTtohighline.com
All donations go straight back into making this channel better. We put donors names in the ending credits and give them exclusive access to the SlackSnap and BoltBuster Raw Data spreadsheet + corresponding footage associated with each break.
Do you want to see the Fusion Climbing Hanger
brake tested in sheer?
Check it out on this episode of How Not to Highline.
Hi, I'm Ryan Jinks, and welcome to Bolt Busters,
where we break everything related to climbing bolts
in every scenario you can imagine,
just because we're curious.
And today we're curious about the Fusion Climbing Hangers,
what I would call the no-name brand on amazon.com.
And these are the stainless steel version.
They do sell a zinc-plated version.
I don't know why, maybe for inside climbing gyms?
Because zinc-plated shit should only be inside.
Never use zinc-plated bolts or hangers outside.
And never mix zinc-plated with stainless steel.
So if you have a zinc-plated hanger
on a stainless steel bolt,
you're going to get bimetallic corrosion,
and one of them is going to rust significantly faster
than if it was paired with a similar metal.
I'm not even going to brake test
the 23 kilonewton zinc-plated shit that Fusion sells,
but only the stainless steel version,
because I'm not really worried about interior scenarios.
I'm more focused on outdoor bolting.
This is 30 kilonewtons of a minimum braking strength,
as they claim.
And what we got on our first brake test
was 31.1 kilonewtons,
and the second test we got was 29.56 kilonewtons,
which is lower than the MBS, the minimum braking strength.
And the last one we did get higher at 31.22 kilonewtons.
Now, 29 kilonewtons is not going to kill anybody,
but for $5.36 each,
they should not be braking lower
than the minimum braking strength.
The 30 kilonewton stainless steel hangers from Fix Hardware
that are rated for only 30 kilonewtons also
literally broke twice as high
in the 50s and 60 kilonewton range.
And they're only $2.95 each
for these 304 stainless steel ones.
So I don't recommend these
unless you need same-day shipping,
and I do believe you can get these on Amazon as well.
So Fusion does not hold up to Fix Hardware.
Now, Fix Hardware does sell zinc-plated bolts,
and I'm not stoked on that,
and sometimes their website doesn't line up
with their products, but not in a terrible way.
However, I love Fix Hardware's hangers.
Now, the way we tested these, as you saw,
is, well, you saw about that part of it,
was the Titan HD concrete screws.
And these do require an impact drill,
which you already have a hammer drill to drill
into your rock, but you do need a separate drill
to install these because you can't just hammer them in
and twist them with a wrench
like you do with so many mechanical bolts.
And gluing bolts require a whole bunch of extra shit anyways
with glue and the glue guns and everything.
However, if you can take an extra drill,
these Titan HD concrete screws have been our lifesaving grace
for these Bolt Buster tests
because we kept reusing the same holes
for all of our hanger tests.
We kept using them over, over, and over, and over,
and we were getting 40 and 50 kilonewtons
before the heads were snapping off,
and they're only a dollar each.
So we buy them by the box,
they are holding down our hydraulic cylinder,
they're testing this kind of stuff for us,
and any kind of experiments that are just
whatever bolt we have, we can use,
this is what we go with.
I don't believe that a hot, cold, hot, cold,
seasonal change is going to unscrew them over time,
making a loose hanger.
We've done a lot of reusing the same holes,
and it's been great.
We highly, highly, highly recommend this
if you can use a drill, can't do that in a national park,
and you're willing to carry it
if you don't have a killer hike ahead of you.
If you want to learn more about how to install bolts,
glue in mechanical or concrete threaded screws,
go to the Bolting Bible on slackademics.com.
We have a lot of information on there,
so you can install the best bolts you possibly can.
So people are not going to risk dying because of negligence,
and they don't have to be replaced every five or 10 years,
which would make a negative impact on our climbing areas.
We do try to make these episodes bite-sized,
so they're entertaining, and we have a lot of information
we're trying to share with you.
So this is how we're doing it,
and make sure you like, follow, and subscribe
on Instagram, Facebook, and YouTube,
because they're on all those platforms every single week.
Cheers.
Hey, thanks for watching, but don't be an idiot
and try highlining without going with somebody
who knows what they're doing the first time you go out.
We actually have available now
the Highline University International,
which is A to Z everything you need to know
before you go highlining.
This teaches you how to use a highline
that's already rigged.
So let's talk about some leash management.
That's the H0 course, which is out right now
and available at hownottohighline.com.
It's over 100 videos with quizzes, PDFs, illustrations,
and it comes with homework and teachers
that you submit it to.
It's a very interactive online school,
so you get to learn in person online.