Lessons from the North! Build Show in Canada - EP

Matt Risinger
48 followers
5 Video Views·Dec 6, 2022
Lessons from the North! Build Show in Canada - EP
The build show is on the road. We're actually in
Vancouver, British Columbia, and I've got a bunch of job sites, several videos to
make, but on today's video we're going to hit
several builders who are building to a really high standard.
Today's video is sponsored by Sega, Inateck Windows, and Quadlock.
Let's get going. Oh baby, Vancouver. I like what I'm seeing already.
This looks like a really complicated house, and I can tell already that it's
being built well. There he is, Marcel. Hey, Matt. How's it going? Hey, man.
Thanks for having me out here, brother. Welcome to Vancouver. So, Marcel, your
company is Econ Group, right? That's correct, yeah. And you're an architect
as well. By trade, originally, yeah. I studied in Switzerland a long time ago,
and I came over to Canada about 20 years ago.
Very cool, and you're Passive House certified, too. Yeah, I even teach for
Passive House Canada. I teach builders and architects about the
standard and how to apply it. Well, man, I can't wait to see your
project over here. All right, Marcel, so what we got going on? I'm seeing some
concrete. I'm seeing some what I would call
typical wood framing, but much, much thicker walls. It looks
like two by eight walls on the inside. Is that right? Yeah, so Vancouver has a
code that requires an R22 effective wall. The one way of
doing that is, you know, increasing from a two by four,
two by six, to two by eight, so you have more
space to put insulation within the structure,
but then you still need a bit of exterior insulation to
suddenly break the studs to add a bit more
insulation value. So in this case, we added three inches of exterior mineral
wool on the outside. So you've got Rockwool R12 on the
whole outside of the building. Just like a blanket around the whole
structure. Okay, so just like on a cold day, you know, I wouldn't
I wouldn't stuff insulation in between my ribs. I've heard Joe Stebrick say I
would put a big jacket on and zip it up, and
now I've got continuous insulation for my body. That's
what you're doing for the house as well. Exactly, and then below ground, it's
concrete, and then it's a foam board insulation on the outside.
Okay, on the outside of the walls, and then is your slab insulated as well in
the basement? Yes, yeah, there's six inches of insulation
underneath the slab as well. Wow, that's great. I want to see that.
Now tell me about what you're doing on the inside, though. Are you insulating in
the inside cavities as well? That's not enough to quite get you to coat on the
outside, right? Yeah, so we're putting dense pack cellulose
insulation on the inside, and then we're insulating on the outside
with the mineral wood board. And for our air tightness, we're using
the WRB, so the sheeting material on the membrane.
Okay. The Seagate MyVest, in this case, with a wig of tape. So that's our primary
airtight layer, which we're, again, wrapping around the whole building, so we
don't have to deal a lot with the choice then for air tightness. Now I'm
seeing that you don't, it doesn't look like you have an overhang on this house,
right? We go right from the walls to the roof. Is that on purpose?
Yes, so again, eliminating thermal breaching. So if you have
a roof choice, drafters coming from the warm to the cold,
you got thermal transfer happening there. So to
eliminate that, you do it in a way that you either overframe and create the
overhangs, or you tack on an overhang that you structurally
connect back to your main structure. And so is that what's happening here? It
is that overframed, meaning the insulation's behind it as well? Yes.
Okay, that's pretty cool. And then is there insulation on the roof deck
as well? Yeah, so there's eight inches of mineral wool on the roof as well.
Wow, eight inches in the roof. What's that R value on the rooftop?
Well, with that, that's about our, what did we say, 45?
That's R32, right? Because it's four per inch with rockwool. And then we'll be adding in
some insulation in the choice as well, which will actually bring it up to R70.
That's some serious insulation. Let's go in and have a look, can we?
All right, IJoyce and 2x8 construction. That's right. So is 2x8 pretty
standard in this area, Marcel? For this Vancouver code, yes. It's not
my favorite, because I like to have the plywood
a bit closer into the warm side, so we're not running into
potential issues with condensation being trapped.
Yeah, because in the colder climate like us here, we have to
vapor drive 90% of the time from the warm
cold to the outside, outside to the outside. So if we
don't have enough exterior insulation on there, then the potential happens that
we have the water condensating behind the
sheeting on the inside, and then it gets trapped. It can't
dry out. Let's take a quick time out on that and explain for people
who don't know what we're talking about. So we're in a cold climate here.
This is not hot and humid. This is cold and very cold
in Canada, and so most of the time we're drying to the outside because it's
cold outside, and so he's going to have a vapor
bearer on the inside to limit the amount of moisture from the house from
breathing and cooking and bathing. We don't want that moisture to get into
the wall cavity, because oftentimes the sheathing is cold,
and that cold condensing service, if we had moisture from the house,
could actually be a condensation risk on the backside of that plywood,
which eventually could cause some deterioration of the plywood. It could
have mold growth. It could have other things.
So what Marcelo is saying is actually he likes a little thinner of a wall. Let's
say a 2x4 or a 2x6 wall with some insulation,
but lots of exterior insulation. So the backside of that sheathing
that's behind us there is actually staying warmer. It's getting a little bit
of heat from the house, and the exterior insulation is what's
really keeping it warm. And so you've got three inches of
exterior insulation, which should be enough to keep that sheathing warm,
but we've got eight inches of cellulose in the cavity, which is almost a little
too much, right? That's right. So the ratio, the
proportion isn't quite right there. But in the south where I am,
we've got typically a low perm membrane, or I even use zero perm on the outside,
and no vapor retarder on the inside because I'm in a cooling-dominated
climate, meaning it's hot outside. I'm dehumidifying
and cooling my house. I want anything that gets wet at the sheathing to come
and dry to the inside. Very different in your climate. Now Marcel,
you're on concrete here, but we're on the first
floor. Are we unframing, or did you pour a concrete deck here?
It's a topping slab of an inch and a half, two inches.
So that's what's going on here then, right? We've got some in-floor heating
pipe under there, so we need to assemble mass of the concrete to,
you know, spread out the heat. And potentially we're going to run some
cooling through it, too. We're not really in a cooling climate.
I like to hear that. But, you know, temperatures are changing,
climate change happens. It's definitely affecting the way,
you know, our summers are. They're getting much hotter, and a lot of people are
asking for the option of having some cooling as well.
Smart. So bathroom, I'm assuming here, and is this leave-out on purpose? Yes.
Right here on your topping slab? That's correct. Yeah, it's
going to be a curbless shower for accessibility. One of the clients
is in a wheelchair, so they can get in here no problem.
Smart. Yeah, then we're going to waterproof that
with a nice Schluter membrane. Are you using Schluter for waterproofing? Nice, that's a
great product. I got some Schluter in my job coming up.
So you'll put the KERDI right down on top of the plywood, basically.
Yeah. And that way you've got that two inch difference to get fall to your
drain. I'm not sure if it's going to be a
linear drain on the side or a central drain.
Now, I'm noticing these two plywood walls here look like you've got concrete
poured up to them. Are these sheer walls on the inside of the house? That's correct.
Yeah, so they're in the lateral strength of the
building, and we're in a higher seismic zone here, much higher
than Newark and Texas. The whole west coast of North America is
on a fault line, so we have some pretty big seismic events. So these are
making sure the house doesn't do this, doesn't move a rock
in a seismic area. Serious nailing pattern in this, too, I'm seeing.
That's correct. It's all specified by the engineer, yeah.
Roughly half inch plywood, mainly? It's half inch, yeah.
Okay, interesting stuff, man. Let's go downstairs. I want to see what
you got going on in the basement, shall we? Sounds good, let's do it.
Ah, Marcel, I like this. Mechanical room, I'm guessing? Correct, yeah.
All your utilities coming in there. I have an HIV in there, a water tank.
And I'm seeing a bunch of green SIGA tape
around the perimeter. What am I seeing there? That's the
poly that's underneath the slab. It's tied in, taped to the concrete.
Don't really need a vapor barrier on the concrete wall, because the concrete
itself is not a vapor barrier, right? Okay. Because
actually, if we now would put on poly on the framing there, that would actually
not be good, because moisture could be trapped behind it.
In this case, we don't need a membrane right there. Ah, check this out, man. This is
cool. Now we can really see what's going on with your
your basement slab, too. So here's your four inch slab,
and it looks to be poured on, how many inches of foam is that? Six inches of
XPS. So two three inch layers, is that what I'm seeing?
Yeah. That way you can kind of stagger the seams? Yeah, exactly.
Dang, that is some serious foam. That's a really high R value for this basement
slab, isn't it? That's going to really keep the cold out.
Yeah. And a lot, I should say, it's going to keep the loss
from this slab to the earth. Yeah, because there's the infloor heating in this slab,
too, right? Oh, this is infloor heated, too? Yeah. The
whole basement? You can see the pipes coming out. That's what that is right
there? Yeah. Oh man, that's cool. This is going to be one comfortable
house. Now Marcel, talk to me about air
tightness for this house. What are you normally getting for
blower door scores? What are you shooting for in this house, and what's
code? At the moment in Vancouver for this
house, it would be 2.5 air changes would be the code.
Okay, so 2.5 ACH 50? Yeah, exactly. Is the current code? Yeah, and that's
changing with the step code. We mentioned that
before, so if you go to the highest level of the step code, it's five, that would
bring it down to one air change. Okay, so step five, the top level, which
you're going to have to get to by 2030? Yeah, 2032. 2032
is one ACH 50, and what will you get on this house, and what are you
typically getting? So we specialize in passive house, which
is 0.6 air changes, so we have to get that to certify,
but average, and not just us, the average passive house has about
0.3 air changes. 0.3? Yeah. So just shy of 10 times better than code?
Correct. 10 times tighter than code, I should say.
Marcel, I get this question all the time. I'd love to hear what you say to this,
and I didn't prep them for this, so this is going to be a live
response right here. What do you get when people say,
houses are too tight, you need to let houses breathe?
What's your answer to that? They don't need to breathe, they need to drive,
so there's a difference between air going through or
vapor. It's like a vortex jacket, right? It is airtight, but your
sweat, your vapor gets through it, and that's the difference, right? So
breathing is not the right expression. You just say it has to be vapor open.
It has to let moisture through it too, right? That's right. Would I be
comfortable in my dry duck jacket if my zipper was down and I was skiing down
the slopes with that wind hitting me in the chest? No.
No jacket would keep you comfortable, but if I zipped up my jacket and got it
nice and airtight, and now I'm going down the slopes and
it's hitting my jacket, it can't get through,
then I'm going to be comfortable, and that's exactly what we were talking
about when it comes to airtightness. And my assumption is you've got fresh air
coming in here as well. Yes, we've got an HIV, so a heat recovery
ventilator that's on all the time,
provides fresh air, and it prevents heat loss because it's
warming up the colder incoming air, it's cold air,
and preconditioning it up to 90% efficiency, and that's just through a
core. There's no heat pump in there, it's just
So even if it was zero degrees outside,
that air as the streams mix in the core, it's going to warm it up
90% of what the house temperature was, so I'm going to talk Fahrenheit since I'm
an American. If it was zero degrees
Fahrenheit out and the house was at, let's say,
70 degrees, that incoming air is probably going to be maybe 60 degrees
coming in. That's incredible. What's going on
here? You got a outdoor patio? Yes, so this is, yeah,
there's a living space down here and not the bedroom, so they got to walk out
sunken patio, so they can, you know, take advantage of the exterior
connection to the garden, etc. Is that what I think it is?
Is that foam embedded in the concrete? That's right, yeah. What's going on there?
So rather than having the concrete go directly from the warm side to the cold,
which would create a huge thermal loss, right, because concrete is quite highly
conductive, we inserted a piece of EPS in line with
where the rest of the insulation is in the building,
so that's now breaking that concrete and structurally we still connected it with
rebar through it, so we still have a bit of heat loss with the rebar,
but not as much as we had the concrete just run straight up.
Now, why is there a membrane over your concrete down here, Marcel?
That's insulation as well here. Oh, that's insulation. So where your window is
going to sit, I've got a pocket so that any water that got in would
hit this membrane and would run out, and it's recessed, which is really
smart, plus this is insulated and that's insulated.
Now that is a smart builder right here for a cold climate.
Nice job, Marcel. Impressive build, man. I'll tell you what, let's go
up to the second floor. I'll meet you upstairs. Hey guys,
Scott is the project manager on this job. Scott, tell me about this assembly. So you
did a peel-and-stick. That's a self-adhered
Seagum product, right? Yeah, this is a Seagum Ivis,
self-adhered, 500SA. How's that to walk on?
It's great. Is it? It's got some grip to it? It's quite grippy, yeah.
It's easy to lay down, so much better than just the
non-adhesive because when you're walking around it's not sliding and
tearing out your fasteners. Yeah, and then you've got a couple layers here
of rockwool comfort board. These the 2x4 size, 2 foot by 4 foot size?
Yeah, exactly, 2x4. So it would have been easier to do two
layers of 4-inch, but our supplier couldn't get it in time,
so we ended up doing a 2-inch layer and two layers of 3-inch to get 8-inches.
Okay, so you got R32 on the roof deck, and then
because this roof has a really shallow pitch for maybe 1.5 or 2.12,
something like that, this is just loose laid and then it's
fastened when you put your batten on, this 1x4 batten.
Yeah, and you got a big old, what, 10-inch, 9-inch screw there?
10-inch screw, yeah. And then you're putting the plywood on.
How are you venting this cavity here though? So this cavity
running along the pitch, yeah, like you said, it's like 1.75,
12. Okay. So at the bottom this was a tricky area because we have a
torch-on gutter going in. Oh, you got an integral gutter detail.
So we couldn't have it venting out the bottom. Okay.
So I just left the channel and waterproofed that because we're
outside of the building envelope here, so our insulation actually
stops back here, but our building is somewhere back here.
Okay, smart. It'll be able to vent out north to south through the ends,
and then this end, our roofers will take care of that.
So you'll have a vent all the way continuous there, and then both the two
gable ends will have a vent. And then when you
ran your 1x4s, you stopped them short so there'd be cross ventilation
in between these bays as well. Yeah. Man, Scott, impressive job, dude.
Tell me about when you put the wall insulation up, any tips or tricks to
putting the rockwool comfort board on the walls? Because you got some
heavy three-inch 2x4 pieces. Yeah. Tell me about how you install those
because you can get your battens a little bit off track if you're not
cautious, right? For sure, yeah. That's most important. After a few runs
through doing this exterior insulation, I learned just as
you're putting the membrane up, make sure the guys are marking
stud centers on the membrane because once you cover it, you don't see
anything, right? So have somebody on the inside take a measurement of studs and
get all your stud centers measured out, and then we actually offset the stud
centers out. We're using a three and a half inch
strapping. We'll offset an inch and three quarters.
So then as you go, if you're starting at the bottom, put your flashing on,
you can have the flashing actually bearing some of the weight or have some
shims or something. And then easiest thing to do is just get your sheets up,
work in teams of two guys, and measure off your lines and just start
setting your rain screen up like that. Smart. And then you can slide them in
from above if you leave a few spaces between. Slide them in from above or
the sides and then just fill in the rain screen. And then you're string
lining from corner to corner so that you can keep that wall nice and flat?
Yeah. Because you can overdrive on that. For sure. And kind of make that
insulation, that rock will crush, right? Yeah. With like three inches of rock
soil, you could easily suck it in like half an inch. Yeah. And then your wall
would look like this when you're all done if you're not paying attention.
Yeah. Smart. So you can, we found the easiest just to string line it once you
have, you know, ends up and work your way between just measuring to the string
line and making sure everything planes out back to screw off if necessary.
Got it. And how far are you trying to screw in those battens
into studs? Are you looking for one inch into the studs or what do you get?
Two inch we usually go for. Two inch into studs. Okay. So other people we've
seen, it depends on your engineer too. There's times where they've said expect
like a much longer screw at an angle to the rim. So certain engineers will say,
like especially in a cantilever detail, some of them aren't too happy with the
idea of hanging your heavy siding on insulation. Depends how heavy your
siding is too, right? So yeah, sometimes they'll spack a diagonal screw going
into the rim or into your top plates. But yeah, with three inches, we're just
using a six inch treated screw through borate strapping. So. Okay. So this is
borate treated strapping? Yeah. This stuff is, yeah. Interesting. Scott, nice
work, dude. Thank you. Impressive job site, man. I appreciate the tour, dude.
Sounds good. Marcel, man, that roof. Impressive. Those details. Woo. Top
notch. You guys are doing a great job. Hey, before we head off to your next job,
I wanted to talk briefly since it was all exposed about your foundation
waterproofing. We don't do a lot of foundations where I am in Texas, but I've
done a couple. And it looks like this is your foundation waterproofing
membrane. But talk to me about the whole assembly that you've got here.
So concrete behind in line with the sheeting, right? And then this is actually
insulation again, that's XPS by it. So we're running our waterproofing, our
over top of the XPS. Yeah. Gotcha. It goes all the way down to the footing.
And then we adding on a dimple mat product here. Okay. So this is Dorkin's
Delta dry membrane. It looks like. That's right. And then you've nailed through
that whole assembly back to the concrete. Yeah. And then you've got some bitumen
maybe to waterproof those. Yeah. And then also the flash and tape over top to
prevent stuff from falling behind it. That's really smart. It's going to hold
that up until you backfill. You've also got rock that you clearly backfilled
with, but you also want to make sure that as your homeowner start planting
all this, that you don't get soil back in there to clog that up. And you
probably have a French drain or something running around the perimeter
as well, right? Four inch perforated PVC pipe that basically goes around the
whole perimeter and then it ties into the city storm. Oh, it ties into the
city storm. So you don't have to have a sump pump. It goes right into a storm
drain. No, we have a sump between that's not pumped. It basically acts as a
buffer between the city storm and the house. So if the city storm floods, then
he wouldn't back up into the house. That sump is just like a, it's just a
concrete sump that's, you know, ducked down and has a bit of a buffer.
Interesting. I've never heard of that before. Well done, Marcel. You're a smart
builder, my friend. Thanks. Let's go see your other projects. All right, guys,
we'll see you at the next one. Hey guys, quick shout out to my friends at
Rockwool, as you're going to see a ton of Rockwool on these builds in
Vancouver. And by the way, I wanted to invite you to come see me at their booth.
They're a longtime build show sponsor. Every day at their booth during the
International Builder Show, I'll be giving a 1030 AM talk about details for
installing Comfort Board 80. And on Tuesday, I'll be at the high
performance building zone at 230. Back to the video. Next house, we're meeting
Marcel again from Econ Group, and we're going to check out another one of his
projects. Oh, look at this. Hey, Marcel. Man, this is looking good. Some
similarities to that last one we saw. That's right. I like it, man. Lots of
differences. Yeah, six inches. So this one is going for full passive house
solidification. Okay, so we've got a passive house to check out here. That's
your dimple mat. And then you've got exterior EPS foam here, or XPS foam,
maybe? EPS. EPS. And then you've got your waterproofing. You're taping it
all with re-sand tape. Yeah. And then you've got, is this your air tightness
tape? And this is, which product is this? This is Sega MyVest, right? That's
right. Yeah, mechanically fastened. Mechanically fastened. So this isn't
even self-adhered. No, no. Interesting. And then you've got some wig glove on
the seams. That's right. And then check this out, man. Lots of outboard
insulation. That looks really nice. And you can see your battens are plywood on
this job, though. Yeah, they're borite treated plywood because the pressure
treated, sometimes you have the problem with it reacting with the metal because
it's got high copper content. So the borite treated is better for that.
Interesting. And your battens are running over top of your foundation
dimple mat. Yeah, we're going to do like a finishing strip, basically get
parched concrete boards to the ground. You can't really have the siding that
close to the ground. So that's the reason for that. So when you get down
here then, you'll stop your siding and then you'll put a cement board, like a
party backer, basically, right? Yeah. And then you'll parch over that so it'll
look like a foundation. That's right. And then do you have a place for air to
inlet into this cavity as well? Yeah, at the bottom there will be a screen,
mosquito net. Okay. Yeah, so the air will come in there. So this is just a bit
higher than the finish grade will be. Once it's spread out, the finish grade
will be like, you know, an inch below the bottom of the battens. Man, this is
so awesome. Super thick. Let's go inside. I'm curious, is this 2x4
or 2x6? 2x6 construction. Okay. What are we looking at here? Some points to
attach a screen. So again, it's about how to fasten them without thermal
bricking. So we're basically, you know, spacing it away so the insulation can
run behind it. It can go continuous behind there. Gotcha. Look at those
screws, Marcel. Holy cow. Now that is a serious, look at that one. That one's a
bad one. Talk to me about these. How expensive are these? Have you found any
tricks for screw costs? This is a nice American one. Well, it actually is
cheaper to order them from Europe. Is that right? Because they use a lot of
them. So there's a bunch of different brands out there. Okay. And we need
those. I mean, basically, you want to bring your strapping back to the
structure, right? So whatever the structural engineer is going to tell you
how much embedment you need, then you need to add that on because we got these
six inches of mineral wool and then the strapping, right? So that's why you need
such big screws. Yeah. And you look at the head, it's not just a simple
Phillips bit here, right? That's a Torx. Yeah. So you get much more power
transfer. T20 bit or something like that. Exactly. Yeah. And then on the inside,
what we do for interior insulation on this job? Typically, we just use a
mineral wool bat. Okay. So a rock wool bat in here as well. Yeah. A lot like the
last job where we do cellulose because that two by eight, you know, it's a bit
better with cellulose because it's deeper. Yeah. Tell me about windows and
doors for this house. What do we do on windows and doors over here? They're
coming from Europe. Is that right? Yeah. So the weakest spot in the envelope
thermally is our windows and our doors, right? We can put a lot of insulation on
walls, but within the windows, it's the frame. So there's a lot of R and T that
goes into this high performance windows. For sure. And if you're working towards
the passive house standard, it's really key to get the right product. Is there
windows and doors? Yeah. Yeah. Yeah. Yeah. And then how do you heat and cool
the house like this? It needs very little heating, right? Yeah. So the
equivalent amount of heating a passive house this size needs is like one hair
dryer. Wow. Holy cow. Not much heat at all. And you don't have radiant on this
job? You don't need it. That would actually overheat the building. It's too
much, too much power. Okay. And so what will you use for heating? That's one
option. If you want to cool as well. If you just need heat, you just put a fine
coil into your HRV. So basically like a hair dryer and it heats up the air.
That's your fresh air supply anyway. And that's all you need. Yeah. So that's
the classic passive house approach. You could use electric baseboards, not a
lot again. Or you could use a mini-split like I mentioned, especially if you
want some cooling, heating and cooling. And are most people putting air
conditioning in houses in Vancouver? Starting to go that route now more and
more. Yeah. It's getting hotter in the summer. Yes. Yeah. Yeah. Now what am I
seeing over here? Let's walk over to this room. I'm seeing some strapping and
some gray tubing with a Zender logo on them. I can guess what that is. What's
the strapping for? Oh, this is a respirator to put out this wall. It's
also for sound insulation in the bedroom. You're next to the living room.
Oh, okay. So this is to isolate your drywall. That's right. From this wall.
And then why the half-inch plywood on here too? We have to fur that out. If you
look at the front here, we got a column. A steel column that is embedded in the
wall eventually. So we had to. You need the depth for the column. We needed that,
yeah. To bury that column in there. Then this is all one big glass front. So this
from here to the end, that's one big glass unit. One fixed panel and one
sliding panel. Holy cow, Marcelo. Yeah. So those are in the middle of the
Atlantic right now, but they will be here by January. Tell me about the
Zender tubing that you've got in so far. So this is pretty new. Zender has made
this, I think this is the first year they made it in 2019. So that's actually
made in North America. It says USA on there. You can see it on there. So it's
flexible to run through like from wall to ceiling, but it's rigid enough not to
pinch and create pinch points within the airflow. So this is for the HIV. So it's
supply and return pipes. They're all about a three inch outside diameter. Can run in a two
by four wall. And it's a manifold system. So rather than having like a traditional
trunk and branch system, where you have like a big duct and getting smaller and
further away from the unit, these pipes run out to a manifold and then each room
has its own set of pipes. So there's no sound transfer between them. It's also
Marcel, you got a lot of bags of Comfort Board 80 over here from Rockwool. Let's go
outside. I want to see what you guys are doing and see if there's some tips that
we could give some people who aren't used to doing some thick exterior insulation.
So let's pop out in your scaffold if that's all right. Sure. Oh man, look at this. That is so
thick. There's a big old blanket of insulation.
So R12, so we're R24 with two layers, right? That's right. On the outside here. Now what's
going on with these? You've got a two by six spanning back and then you've got to wrap
something over here. What is this? We need an attachment point here for a screen that's going
to get put on in front of the windows. OK. So rather than having, you know, something stick
up on the inside, again, it's about thermal bridging here. So we want that insulation to
run behind that fascia board or that back of boards for the screen. So now you've got really
minimal bridging, really just in this one spot right here. And so that insulation is going to
come up all the way through. And then again, you've got your battens that go on there. That's
right. Yeah. And I'm noticing on the wall, it looks like you've marked out center lines of
studs. Is that what I'm seeing here? Yeah, I guess the mark that I can screw in, transfer it.
We typically would run a tape all the way from the corner and then one guy inside measuring it
or transferring or writing it down and then transferring to the outside. So you're making
sure that you're hitting your studs with your screws that are tying back from the strapping.
And ultimately the strapping is holding it on, but I'm seeing you're using a couple of cap.
Because it's two layers, right? So you've got to start with one layer, then you want to stagger
the joints. So we just use very sparingly. We use some cap nails to hold the first layer on and
then start building up strapping. And your Sega WRB is your air tightness layer, but this is
not a self-adhered product, right? No. This is a loose sheet. It's basically just staples behind
the joints here. So we don't need any mid-field staples. Yeah, I've not seen any staples in the
field at all. It's pretty tight, right? It's not wrinkly or anything. But yeah, because afterwards
Yeah, and this is holding it on and this is holding it on. And then you're taping all the
seams. And then once the windows and doors are in, I'm assuming you're going to use some more
Sega tapes on the inside to really make that air tightness layer continuous, right?
And what kind of numbers do you think this house will blow when you're all done?
We're definitely going to have to hit 0.6. I think we're going to come in probably around 0.3.
Man, that's great. Okay, so now you can see there's that attachment point
and you've wrapped just the standard SPF lumber in the Sega so it'll stay dry, right?
Yeah, we could have used a pressure treated piece of wood as well.
Yeah, that makes sense. And so now you can attach that screen into a solid hard point right here.
And then at the top of the wall, you're going to have an outlet for air, right? And then you'll
have an inlet at the bottom. That's right. And what's your cladding that's going on here later?
It's actually going to be like a board and fan, a vertical cladding. So we're going to have to
strap this horizontally again. Oh, okay. This way. Yeah. So that's why we're not really worried about
the screw head sticking out, right? Because it's going to be behind that. Because these heads are
really big. So you're going to go horizontally one more time and then you'll end up being that
much further off. In this case, that will give us also an opportunity to shim if we have to,
right between the two. When we have a regular horizontal siding, we got to counter sink our
heads so they're not getting in the way of the siding. And then we got to spring line the
strapping as we work our way up the wall to make sure that we're not getting deflection.
Because these screws are pretty strong and they can pull in. You can maybe see a little bit of
hailing going out. You can compress this if you really push that screw in there.
So by backing off or pulling in the screw, you can adjust that and then just make sure it's in
a nice plane. And for a builder who's not seen rain screen, give me a couple of your benefits
that you would say to a rain screen assembly. And by rain screen, I mean that the cladding is held
off with an air gap behind it. So one of them is air. So it allows for drying if that gets wet. So
there's a space of air. If the cladding would be directly to that, there's no convection happening.
There's no air drying happening there. So that's one of them. The other one is also
if water gets behind the siding, it's not stuck against the insulation, but actually it can drip
down on the back of the siding. So it's creating like a capillary break for an extra plane of
drainage. A capillary break. The other thing I found too on my house is in Texas in a hot climate
is it lets my paint film last longer. Even on a product like James Hardy siding that you would
think wouldn't have any issues. I just visited a house recently that I did 10 years ago with James
Hardy Artisan on the outside and the paint job still looked great 10 years later. Still haven't
repainted. Most of the time in Texas I tell people you're going to repaint it every five to seven
years on the outside of your house. But with a rain screen, it can dry to the back and dry to
the front. World of good happens by a rain screen. Man, Marcel, I really appreciate the tours.
Guys, I'll put a link to Marcel's company and his Instagram feed in the description below. But
man, I really appreciate you having me. I'm going to some other job sites today. I've got one of
the Sega guys as my tour guide. But man, I really, really appreciate it, Marcel. You're doing some
great work here in Vancouver. All right, next up on the High Performance Roadshow, we're going to
visit Greg Haesler. But check out this house next door. This totally reminds me of an old house in
Vancouver because it's dark and stormy and gray a lot here. But it rains, so look what they did
here. They added this big glass kind of pitched front porch to the front of this house. Man,
that's ugly. However, Greg is building this. This is Greg Haesler. Greg, how's it going, man?
How you doing, man? Nice to see you.
Good to see you. Greg, I got to say, I love your branding, man. Having your windscreen with your
logo on everything, your job rules, your architect sign up there. That's nice, man.
Thank you. Oh, yeah.
And this looks like a well-insulated house right here. What do we have going on here?
We got a nice house. We got five and a half inches of insulation on the exterior, comfort board,
ICF foundations, insulation slope roofs, three inches to 13 inches.
Okay.
And SIGA throughout the whole envelope.
For air tightness.
Air tightness.
Yeah. And this is a custom home, right? So you've got an architect involved over here.
Correct.
And you're a custom builder. How many houses of the year do you guys build?
About five to seven.
Okay, good deal. And tell me about this rain screen detail. I don't usually see
two by fours on rain screen. We just came from a project that has the more typical one by four.
This is beefy, man.
It is. Well, we were quite concerned. So the reason why it's so thick is that we're
having five inches of comfort board insulation.
Yep.
So we found with them past doing the one by four does waver. So we put two by four
and we string line and have it all taped. So it's straight as an arrow.
Okay. So you said a bunch of things that I think are worth mentioning.
The string lining is really important.
Yeah.
So you're probably making sure your outside corners are right.
Plumb them first.
Then string line.
So that when you're using the impact gun, you could still over tighten this.
Correct.
And I think it's interesting too. It looks like you pre...
So we didn't over tight.
You didn't over tight.
That was the biggest thing. We started off, realized it wasn't working. So we pre-drilled
all of them.
Pre-drilled them. So then those are countersunk. So now everything's flush here too.
Correct.
And what's going on with these horizontal lead ends in a few places?
So we ended up coming in and we wanted to put a vertical siding on. We planned to do
horizontal everywhere. So then we came back and did... So we could create the air barrier
still and have the rain screen.
Yeah. So this is a change order basically. It went from a horizontal to a vertical.
What's interesting is when you get that depth, look at this,
his box is fully outside of everything. That's kind of nice.
Yeah.
That's a big benefit.
So basically we tape and insulate and caulk around all our wires first.
Yeah. So keep your air tight.
I saw these cap fasteners on another job. Are you getting those locally? You know who makes those?
I don't know who makes them. Our supplier down at Dick's Lumber gives them to us.
Yeah. That's smart. I like that. Now check this out, guys. I have not seen that detail
since I left Germany. I love these big, thick exterior window bucks out of metal.
He's got flashing on them. Who's making those for you? Is that your guys?
No, we have a custom guy here. He does it for us. Comes out, measures them,
doesn't sight, bends them in a shot, comes out and installs them.
And that's the gauge. That's like 24 gauge maybe?
22.
22 gauge!
Yeah.
With a drip edge on there, you can drop your siding up. You can see he's got his bug screen
on there already, his bug screen here. So now when his cladding goes on, he's got an inch and a half
there. So any water that gets past the cladding, it's going to fall down and plenty of airflow
to pop in and pop out and dry. Man, that is best practice. Well done, Greg.
Thank you.
Let's go inside, shall we?
Hey, Greg, before we run in, I wanted to make mention, I like this garage job desk. You've
got plans set out for the carpenters. Anybody can pop over here. You've got everything staged.
If you need some screws, if you need to grab something, you've got some Sega tapes right
there. That's pretty smart.
Jawboards, typically you can see.
Jawboards, so you know schedule-wise what's going on.
And you're protecting your garage slab with this plywood? Is that what's going on here too?
Yeah, first we have poly, then we got this taped.
And you'll take this from job to job probably?
Yeah. Yeah, we'll reuse as much as we can.
That's pretty smart.
And then you've got some R22 bats here. Is this what you're going into the cavities on
the inside of the house?
Yeah, these were used for that and the parapet walls. So all the parapet walls, we frame and
then we insulate them.
Re-insulated those. Smart.
Yeah.
All right, man, let's go inside.
Look at that manifold. I'm assuming that's your manifold for all the in-floor heating?
For upstairs, that's one of them.
Rehal. That's cool. I like seeing that.
Very nice.
Now I'm seeing that you've got some standard SPF lumber,
and then you've got some of this engineered stuff as well, right?
Correct. We wanted to take some of our bigger walls to be straighter in the house,
so we decided to try this product out. One of the first times trying it out in our homes.
Really liked working it. Kept it really straight.
Cool. And then you've got all engineered lumber for your ceiling joists as well.
Yeah.
Because that's rooftop deck with some skylights going on?
Correct.
Or rooftop deck up there?
This is where our solar is going to be. The rooftop deck is over there, but
the whole roof has 13 to 3 inches of insulation running through it.
Okay.
EPS.
And then what would you do for insulation in these cavities here?
Two pound spray closed cell, and nine and a half inches.
Nine and a half inches?
Yeah.
So what's that around? R7 per inch? Something like that?
So you're going to have R50 plus.
That's pretty impressive.
Check this out, y'all. This house is getting something brand new. Apparently,
this owner has a connection to the inventor of this product,
but it's a tile that has a magnet base on it. So you get a perfectly level subfloor,
and then this rolls out. Apparently, it was on the Canadian version of Shark Tank, which is...
Dragon's Den, Greg? Is that right?
Correct.
And then check this out. When the tile goes down, it literally clicks into place.
Got it.
Stuck pretty good. And then the tile is down. So if you ever wanted to change your tile someday,
it'd be hard to get up, but I'm sure there's a tool you can use, and check that out.
It comes right off. There'd be probably no grout even on this, right?
No grout. Zero grout.
You just have a nice, tight, rectified edge on probably a porcelain tile.
That's wild. I've never seen anything like that. Do you know what the product's called?
I don't really know.
Not sure what it's called, but look for it on the Canadian Shark Tank.
There you go.
That's cool.
Yeah. No, it's awesome. And the whole idea is it's supposed to be green,
so they're taking away from using those borders.
All right.
I see that. Look at these giant shear walls.
Shear walls. So we decided to use some of the tiles that have engineered studs.
We want to try them out to see really how much more beneficial they are.
Oh, yeah, yeah.
On long walls, 100%, they stick way straighter, especially in our climate.
Yeah. I've done a lot of these over the years.
Yeah.
What do you like?
I do, but you have to really convince the clientele.
Yeah. You're definitely... What do you think the upcharge is in terms of percentage?
Do you have any idea?
Percentage-wise, I don't know. I know they're about...
Two X?
Yeah.
Or more?
Oh, it's more.
Yeah. 2.5?
Yeah.
Yeah. It's... But it's worth it. I mean, if you have a few walls...
A few walls from housekeepers...
And if this was a kitchen cabinet wall, that would make a huge difference.
Yeah.
It's like you've got some Schluter going in. What's going on there?
We are. We've got two Schluters coming in.
Some linear drains. Is that what I'm saying?
Correct. One's an offset.
Man, Schluter makes a killer linear drain, I've got to say.
That's one of the reasons why I personally have moved over to Schluter,
is this drain system really integrates into the waterproofing nicely.
And we got into linear drains, I don't know,
10 years ago when they first started to get hot by designers.
They were a huge pain.
Oh, yeah. No, they've been amazing. We use them on every home.
Yeah. That's cool.
Yeah. And we use their curtain system on every home.
Yeah. Anytime we're doing waterproofing.
So this is going to be your vapor control layer on the inside, right?
Correct.
Because in this cold climate, we need a vapor control layer.
We don't want that water from the house coming in and condensing in the back of it sheathing.
And so we want to control that.
And this is also a secondary air tightness layer over the house too, right?
Yeah.
So you're probably going to blow a pretty tight blower door score over here, I would bet, right?
Yeah. Our midterm was 1.1, 1.1.
1.1 ACH50? That's good, man.
Yeah. Most of our homes...
You'll be really tight.
Yeah.
0.5 maybe or something when it's all done.
Hoping, hoping.
That'd be good.
Yeah.
It's interesting to see that you run all of your drain waste vent up here in Canada in ABS.
We don't do that at all in Texas. Everything's PVC for all our drain waste vent.
I honestly don't know the differences between the two, but
it's interesting to see you guys have all ABS here.
We were lucky on this.
We could use the outside wall because we already have our technical or our code required.
Yeah. All your installation's outboard.
So we can run it here, which most times in here we can't.
We have to have an exterior wall or an interior wall.
Yeah. And then you're a PEX guy?
Yeah.
Mostly PEX in Canada?
I'd say Worsbro.
Okay.
Yeah. So most of it's run on Worsbro.
This is Worsbro.
That looks like Gupenauer.
Is it Worsbro?
Yeah. This is Worsbro.
Yeah. Portable.
No, that's Gupenauer.
Is it?
Yeah.
It is. No, you're right.
Yeah. Gupenauer, Apple PEX.
I lied to you.
That's all right.
With non-restricting flow valves though, right?
Yeah.
Cool.
All plywood in this market too, isn't it?
Yeah.
I haven't seen anybody use OSB.
Some guys use it on their floor systems.
They use a 7-8s.
Uh-huh.
Gold.
Edge gold.
I've seen that, yeah.
I wouldn't use that either.
No.
I'm a Hebrew Advantech guy for my flooring.
But I definitely see that it's in a really wet climate for using the true plywood.
And is this just half-inch or is it thicker?
It's 5-8s.
We've actually changed our homes to three-quarter now.
Three-quarter now?
Because we're finding that we're putting so much insulation on them.
Yeah.
Just to be able to screw a screw in anywhere instead of having to hit the stud for sure.
So pretty much our other three homes we're doing now are all three-quarter.
Man, that's sweet.
Three-quarter inch shear wall, which means that you can take really a fastener just about
anywhere.
And I've heard from the engineers that I work with, too, that if you upgrade to three-quarter,
same goes with brick ties and all those other details, you're not worried about hitting
your stuff.
Just get it in a three-quarter plywood.
Just get it in the plywood.
Because it's so beefy in there.
Yeah.
That much thicker.
If we have to, we run a row of the brick ties if they're heavy enough.
Yeah.
But, yeah.
Good stuff, Greg.
Impressive.
What else do you want to show me?
Anything else interesting over here?
We are in our interior slabs down here.
Basement slabs.
You can't see it.
We use two layers of three-and-a-half-inch PEX with a 10-mil base layer, or a poly layer.
OK.
I don't know if you're going to be able to see it.
You can't see it, can you?
That's all right.
It's kind of easy to see what you're doing.
So we take off.
I think I might be able to see your ICF out here, though.
That's cool.
So the ICF is coming up, and then what's this over top of it?
This is just a poly over top of it in this area.
There's more or less that protects over time.
Just the tray's heating up on it.
But we seal it, and then we'll spray foam right through.
Oh, OK.
You will.
So you'll go closed-cell foam from the bottom plate here all the way up?
Half-pound, half-pound.
Half-pound, open-cell.
Yeah.
And we'll do that until we hit here, and then it'll be two pounds up here.
Just because it's a double layer, we don't want to cause moisture.
Oh, OK.
So open-cell here, then closed-cell here.
Yeah.
That makes sense.
And then I think you mentioned there's some closed-cell going on the roof line upstairs
on the top level as well.
Correct.
Then you have exterior foam on your rooftop as well, or exterior insulation?
13 inches to 3 inches of EPS.
OK.
So just a taper.
Yes.
And a flat roof.
Correct.
Very cool.
Then we insulate between the floors, all soundproofing.
And then every—
How are you insulating now for soundproofing?
We're doing a three-and-a-half-inch layer, a four-inch layer of rockwool.
OK.
And then we'll insulate all the pipes.
We'll come back through, and we'll insulate the guys.
The tuck guys have just finished doing their pipes.
That's interesting.
This is not at all what we would do down in Texas.
This is almost like a bubble wrap insulation.
Yeah.
That's wild.
Exterior on the outside of a metal pipe, though, right?
It's R6.
Wow, it's R6.
That's good.
That's really good.
And that's all metal, I'm assuming, right?
That's cool.
What's your heating and cooling system in this house?
We have both.
We have in-floor radiant floor heating for comfort.
And then we have an air-to-water heat pump outside doing AC and heat if we want it.
Designed by a mechanical engineer.
Just wanted to have the comfort of both.
Actually, it was really the client who really wanted it.
Cool.
A little bit different.
And we're having a full Crestron home, so fully automated.
Impressive build, Greg.
Really impressive build.
Anything you see upstairs?
That is the upstairs, right?
There's not a second floor.
No, but we could go to the rooftop if you wanted to.
Yeah.
Oh, let's take a look at that.
Oh my gosh, check that out.
That is cool.
I've never seen one in person before.
All right, so this is your main stack from the house.
Yep.
This is all of your drain coming down.
And then the idea is that this drain has some hot water in it.
Correct.
And then this, is this your incoming water?
Incoming water.
Goes, loops around, goes back in.
And then does this go where?
To the water heater next?
Goes to the heater, yeah.
So it's a pre-heater, basically.
Yeah.
Got it.
So we're actually, on the water line that's coming in, we're going to have
a little thermostat for checking occasion.
But find out when it actually does.
Because I feel like on our last home, we put it in after the fact.
We were reading, I believe it was four degrees on this.
By the time it was leaving, it was 13 and a half on our last.
So it was pretty, for me, it was interesting to see that effect.
Yeah, 10 degrees Celsius.
Yeah.
That's not bad.
That definitely is going to save over time.
How expensive are these units?
About $350 to $500, usually the 60 inch ones.
This one, they spec this size.
So we stayed with the spec.
That's a lot of copper.
No wonder it's so expensive.
Yeah.
And this coupling right here, this couples this unit with your ABS.
So is this a solid copper pipe?
Yes.
And it's actually like this.
So when you go, water actually penetrates it.
Right, it's actually going all the way around.
That's wild.
So then you've got a little neoprene gasket.
I wonder if you need access to that in the future.
Are you going to have an access door or is this a mechanical room?
No, no, we don't have to have access.
We typically try to always put them in a mechanical room so you can visually see it.
Yeah.
It's actually kind of a cool feature.
Cool little thing to show people.
But this one, with the way the stock ran from where the design was done,
we had to put it over in a wall over here.
That's wild.
I've never seen one before.
That's neat.
So $350.
It's going to take you a while to pay that back.
It does.
If you look at the thermal drain thing,
they say it's the cheapest form of a green solution to your house though.
I mean, and there's nothing to go wrong with it.
It's a static solution.
We're developing one right now that goes on the horizontal,
which will be pretty cool when that comes out.
So because then you could actually have all your water doing it instead of just portions.
Because right now this is only picking up three units upstairs.
On another house, we have three of them because we're picking up everything.
And what did you say your inlet temperature was here?
We're about four degrees.
Four degrees Celsius.
That's like, what, 40 degrees Fahrenheit or something like that?
Rough.
Holy cow, it's cold.
Your water's just about freezing coming in.
No wonder you want to preheat it.
Yeah.
My water here is 60 degrees or so coming in.
So what's that in Celsius?
Probably 15, 16.
Wow.
It's cold, man.
That's a big change.
And then we have a bypass at the tank over there that just takes you directly.
If you want to bypass it, complete this for cold water.
So your system hits cold water anyway,
instead of obviously going through a new form system.
That's cool, man.
I like that.
I saw one of those where they had inline renewable hydro generators as well.
Yes.
So you're getting electricity and heat from your radiator.
Oh, wow.
That's neat.
This house is going to have about 13.6, I might say it wrong,
kilojoules of solar.
Kilojoules of solar.
So that'll probably do most of the house.
Yeah, pretty much run the house.
But I mean, obviously our solar intake here is not like that.
Yeah.
Yeah, not quite as much.
We don't have as much gain as I do.
No, it's an amazing thing.
Man, Greg, I appreciate you opening up your job, man.
Guys, I'll put a link to Greg's website and his Instagram feed in the description.
We've got to get going to another house,
but we really appreciate you opening up to us.
Thank you.
Appreciate it, man.
Hey, guys, thanks for hanging in there for a long video.
There were so many details.
It was hard for me to turn the camera off
because I was so excited to see how they do things in Vancouver.
And one thing I wanted to point out that I may not have made clear in today's video
is that they've got something called a step code going on in Vancouver,
which means that builders by time 2032 comes around
are going to have to build a step five,
which is a very rigorous code when it comes to air tightness and insulation.
And speaking of insulation, long time show sponsor Rockwool.
I want to shout out to those guys.
Boy, Vancouver builders, we saw Rockwool all over today's video.
That was not on purpose.
That was an accident.
Honestly, I didn't realize how much builders in that area have really embraced Rockwool.
I've been using it for a couple of years now.
I really like it as an insulation.
I think there's a lot of benefits.
And if you saw my earlier plug,
I'm going to be in the Rockwool booth at the international builder show this year
on Tuesday, Wednesday, and Thursday,
giving a talk every day at 1030 for about 30 minutes,
talking about some tips and tricks for installing exterior Rockwool,
a few different ways to mount your windows,
how to do details,
how to do rain screens,
lots of in the weeds,
building science details.
And on Tuesday, the 21st,
I'm going to be at the high performance building zone.
So if you're going to be in Las Vegas for the builder show in January,
come see me at the Rockwool booth.
Guys, thanks for hanging in there for this long video.
I've got more from Vancouver.
I was actually there for five days.
So we've got several more Vancouver videos coming out.
If you're not currently a subscriber,
hit that subscribe button below.
We've got new content every Tuesday and every Friday.
Oh, and by the way,
check out our new content every single day on buildshownetwork.com.
We're filming at job sites all over the country with four different builders now
for that version of the build show.
Follow us on Twitter and Instagram.
Otherwise, we'll see you next time on the build show.
