Andersen 100 Window Best Practice Install Method

Matt Risinger
48 followers
6 Video Views·Dec 6, 2022
Andersen 100 Window Best Practice Install Method
Hi, this is Matt Reisinger with Reisinger Homes. Welcome to my video blog on green building and
building science. I'm here with Ricky and Eduardo and we're setting some Anderson 100 series.
They're a Fibrex window. We've got one set right behind us here. I'm a big believer in the Tyvek
family by DuPont of weatherization and these guys are going to set one of these Anderson 100
series windows on this remodel edition project. This is a new garage that we've framed over
here for these homeowners. It did not have a garage prior. The first thing we do is put the
sill pans down. This is a Flexwrap product by DuPont. It's nine inches wide and they're making
a custom sill pan with this product for each window. You're about to see why they call it
Flexwrap in a second here. Two-stage release, which is really nice, makes it easy for the
carpenters on the job site when they're setting windows. And here, watch this. Ricky's going to
flex that around that corner. Makes a continuous sill pan. That's why they call it Flexwrap. What
a great product. Not inexpensive. It's probably somewhere around $1.75, $2 per square foot,
something like that. But boy, is it a nice product. So they've made that sill pan just
perfectly for each window rather than, let's say, making a sheet metal sill pan, which would take a
lot of time and money. They're going to put a couple of tacks on there just to hold that in
place. And you guys have the shims on you? Yeah. So one detail I really like doing too is putting
some shims at the sill of the window. There you go, Ricky. Those are really just to hold it in place
as that polybutylene on the backside of that dries. And then I buy these horseshoe shims from,
I think it's mrshims.com. They're about an eighth inch or less horseshoe shim. I'm going to put
three or so of those on the sill just to shim that window up. And you guys got the window?
Oh, Larry left. Just one second, gang. Hey, while I'm thinking about it, let me show you this
Tyvek product we're using on this. This is Commercial D. As you can see here, it's a
drain wrap product. So it's got a little bit of a crinkle to it. And this product is the commercial
version. So it's a little heavier duty than the standard Tyvek home wrap. I really like it because
it's got a longer UV rating. So now Ricky is caulking three sides. We don't caulk the sill,
we caulk the sides. And we put a bead of caulk at the head. Now he's going to caulk that other
jam side. And the reason why we don't caulk that sill is because we spent all this money on a nice
sill pan that we've made. And if we would have caulked that sill, it would create a back dam.
So if that window did leak, it would make that water back up into the house.
Larry! One more shim here, guys. We lost one there. There you go. Anyway, so this Commercial D
that I like has a longer UV rating. So if you've got a project that takes a little longer to get
wrapped up, this has a six month UV rating rather than a standard 120 day UV rating,
which is standard Tyvek house wrap house. So it's a little heavier duty, a little longer lasting in
the sun. And I found that it's just a better product overall to work with. It's less prone
to tears and rips on the job site. We're not building these houses in a factory. We were
building out in the field where things happen. And sometimes that Tyvek can get a hammer scraped
against it by accident. And this stuff just stands up much, much better to the general traffic.
It's a new Cocoa Bean Keller by Anderson here. You can use a pneumatic nail gun on these flanges,
but you just got to make sure that your air is turned down. So Larry's got the level inside.
It's tough to see, but he's leveling the jams. He's going to pop one nail in there on that other
flange. Of course, like any contractor, my phone's ringing off the hook while I'm trying to make
videos. Okay. So now the next step on this, once he gets that nailed off, you guys got your horseshoe
shims for the sill? Go ahead and put your shims in there. So we put those shims on the sill.
And then before we nail off this bottom, in case you do get water on there, we're going to give
that water an escape path. So when we pop a shim on there and then nail through there,
that water has a place to escape. We're going to do that about every other nail flange or so,
or every other nail hole rather, on the bottom of this window.
We're just belt and suspending it. We know that windows will leak in time,
if given the right exposure and the right time frame, no matter whose product they are. And so
we just want to make sure we're doing everything we can to make sure that moisture stays out of
this house, because water is the enemy of your house. That's for sure. All right, Ricky, go ahead
and nail off those sides and that head, and let's show them how to do the straight flash. And then
we'll be all done with this window install. A little bit loud here. Sorry about that. Okay,
while he's nailing off that other flange, let me show you the next product we're going to use.
This is called DuPont Straight Flash. This is a flashing tape that we use. It's four inches wide.
It's the same... I think it's polybutylene is the adhesive used on this. And again, I'm a big fan
of the DuPont family. And the other nice thing about staying with one manufacturer, and I happen
to think that the DuPont Tyvek system is the best, but I really think no matter which system
or which brand you like, stay with that brand for all the products you're using when you're
talking about your flashing and your window details. If you ever did have a problem with
the window and you've got two different products on there, it's very likely the manufacturer can
say, oh, well, we didn't expect you to use brand A with brand B. So if you do have a failure of
any way in your wall assembly, neither one of those manufacturers are probably going to back
you up because you didn't necessarily use the recommended procedure. So you can see,
you always do the sides first and then the head last. The other important thing to notice is that
we're not going to do the sill on this window. You only want to wrap the two sides first and then
the head. The sill needs to be left open. Make sure you get good adhesion on there.
If it's wet weather, you can use 3M High Strength 90 as a primer, which is basically a spray
adhesive. You see that a lot used for laminate installations. So they're getting those two sides.
They did the right. Now they're going to do the left. And then very last, they're going to do
that head. And this window is going to be nice and weathertight for the life of this house.
With a system like this, I have no problem saying these windows are going to be weathertight for the
next 75 plus years, maybe longer. This house will get remodeled before these windows are going to
leak. And then there's the sill right there. They're just measuring it for the head, but
they're not actually going to put that on the sill. And then you can see, here's our horseshoe
shims that I mentioned. And they bring that down. Any water that's going to come down there is going
to run right off in a shingle fashion. And last thing to do is the head. We're just about done,
guys. So they run that all the way across the sides. Get nice adhesion on that OSB right there
where it's exposed. Now they're going to take that flap that was flapped up. They just put
one tack on there. They're going to bring that down and cut it flush. And then the very last
step is just to put a piece of Tyvek tape. I like the wider tape. A lot of times you see the
inch-and-a-half tape or the one-inch tape. I guess it's inch-and-a-half. This two-inch or
three-inch tape, you can buy it in. It's just a little more protection. I like using a little
wider. Just one less thing to make it a little more idiot-proof when we install it. No offense,
guys. And here we are, all finished. That's one perfect install. Great job, guys. Nice work.
Every window in this house will be set the same exact way. It takes about 10 minutes of
Ricky and Eduardo's time to set one window. And you can see this is a fairly small window.
And the supplies cost a few dollars. But boy, we've got a window here that's going to last
for a long, long time. And really, that's the best possible window install you can see.
I'll show you in the future how when we get to the stucco phase on this hide,
how we put a head flashing on here and how we flash the sides with stucco. I'll do that in
a future video. But thanks for joining me and thanks for hanging in for a long video.
Thanks again, guys. Good install.
