How strong are V threads? The rope in a loop is going to be strong enough to catch any whipper and be a 10:1 safety ratio to rappel on. The real question is more about how strong is the ice. We did 5 tests in this video and found the 6mm and 7mm ropes break when installing them with 21cm screws but the ice kept breaking at 14kN and 15kN with our 10mm rope until we put it in a giant v thread and found out we couldn't pull it to failure.
What are we brake testing today?
Brake testing some V-threads, my friend.
Yeah?
It's gonna be a big day.
Wow.
What's a V-thread?
You use two screws, go down, connect the rope,
tie it off like a boss, and then we try to break it.
Tell me about this ice.
It's different than waterfall ice.
It is, it is.
It's very, very dense.
We're talking about ice that has moved,
compressed for hundreds of years.
Approaching first a glacier in Iceland, right?
If we kind of back up for a second.
Yeah, yeah, yeah.
And just to give you context,
the valley you walk through,
this was carved by the ice, right?
So you had this massive, massive glacier
breaking the igneous basalt around,
just scraping the rock.
That's also what you walked on today.
And if you notice as you walk by even next to us,
you can see the striations on the rock
as it's grinding and moving forward.
And so this glacier used to be way closer to the car.
Yeah, so if we go back, for example, to 1895,
all the glaciers on these outlets here of the ice cap
were all kilometers further forward.
And so in a year, all this would be gone.
Exactly, like what we're testing on today will be gone.
Like that ice will be gone in probably weeks, right?
So the melt happens so quickly.
So people shouldn't be too worried
about the fact we're breaking this ice.
No, I mean, you could come here and kick as much as you want
and break as much as you want and it would be gone anyway.
So as long as it doesn't fall on us, then we're good.
Yeah, yeah, we're just pulling it towards us.
That's the weird part.
So we established a pulley on this other block of ice
and we're installing this V-thread
kind of in the ceiling of this other block of ice.
So we're pulling in shear.
Exactly.
Instead of tension or straight out.
Shear is how you normally use it.
It is, yes.
That's what we do in the guiding world.
That's what we'll be doing with clients.
And yeah, it's ideal.
That's how we rigged the high line and the rope jump.
Standard guys getting like 16, 12 centimeters of a thread.
Because they're cropped.
Exactly, and what they're doing,
they're probably putting one in
and they're getting the other one just like right up here.
You're just using your ice screws that you have.
Exactly.
And the longest ice screw is how long?
21 to 22, depending on the brand.
Cool, and then the ice threading tool just fishes that out.
Exactly, because the rope goes in
and you have the acute angle
and we have to pull the rope through.
So we have this nice little shock tool.
You could use, for example, a sling if you lose your hook
and just pull it through.
Oh, you put the sling past?
Exactly, ideally just pull it through.
And you don't do this lead climbing.
You do this to build like an anchor.
Yeah, if we're making an anchor long-term,
like for example, on a glacier
to secure clients to the ice,
we would use V-threads
because we want those threads to last for weeks.
If you're rappelling off like a waterfall
or something that you're going down
and you want to leave no trace of your gear,
can you thread your actual climbing rope through this?
We do, yeah.
But the thing to consider that it may freeze.
As soon as each person goes,
we have to pull the rope and just check, make sure.
It did freeze on us last night
when we were cleaning up from the photo that we got
that had like the two holes and the fire dancing.
The one anchor froze, we had to all pull to break it loose.
We'll find out what it is.
That's what this whole episode's about, baby.
I'm just going to make a shallow V-thread
with a really skinny cord and just see how it goes.
Keeps getting clogged with ice.
Wow, dude, it's cracking.
I bet if you jerk that thing right now,
the whole thing comes out.
That's going to be-
Yeah, that's compromised as hell, man.
When you're on lead, usually you want sharper screws.
And usually you're not placing them in the ceiling.
Actually, it's nice to leave one screw in
and then you can see your angle.
This is actually helpful.
This is just cracking.
Looks like it connects.
All right, we want six mil thread in there, yeah?
Yep.
Hopefully the ice breaks.
Oh, nice.
And what's that tool?
This is a V-thread tool.
This has a hook and has a little saw on it
and you can cut your cord
and this can also hook on your harness.
So what's your knot of choice?
I usually go overhand follow through.
The saw just popped off.
We're supposed to break test the ice, man, not the tools.
Yeah, I usually go this knot
because it just takes the least amount of rope
and it's super strong.
Super strong, how do you know?
Here, let's find out.
Yeah.
I'd say like this V-thread is like close to-
Close to good?
Close to what we usually do.
Okay.
Like the depth of it.
So our line scale three is in this Pelican case
or most of what a Pelican case is.
We basically have it going from zero to fast, fast
and the meat is sliding out of the sandwich.
And so in order to protect this line scale,
we had something break on this side earlier in a test
and everything went flying that way and things got damaged.
In order for it to not slide out,
I put the sling around here and then VT Prusik did
and kind of just did this janky thing.
Kind of makes it a pain to open and close,
but I really don't want to break the line scale
on this trip.
We've already broken, I think Stephan's carabiner
and Janet's ice screw.
Did we break anything else?
Oh, and Alex got just broke a V-thread tool.
Let's break this six mil cord.
Oh, wow.
Get it tight.
Oh, there's a nice core.
Interesting.
So it was in the knot?
Yeah, at the knot.
I mean, I think that'd be a failure point each time.
Wow.
Hold on.
You got to say, wow.
Wow.
Crikey.
Failed because you have both sides of the knot.
We also pulled it like three times pretty hard, right?
Sure.
But it was also cracking a fair amount of the ice.
Yeah, so you see the line here,
here and then here.
And the grand reveal.
What was the number?
I'd say 10.
Boom, boom, boom.
Oh, 10.39.
10.39.
Like a Shangri-La band.
Shangri-La band.
Nice, love it.
Shangri-La band.
That's a fair amount,
like six millimeter at 10 kilonewton.
Well, think about the ice screws, right?
You got to point to the corner of the screen.
So they, that's how I can...
They look at the other episode.
Same V-thread.
I would like to see the ice blow out.
It makes for better slow-mos.
So I can make a better intro for people.
I don't have to just bore them
with all that awesome hiking footage we got.
It's amazing.
Where else can you see this though?
Like this is really cool.
What you got there?
This is a seven mil cord.
All right.
Do the grand reveal.
Wow, that is not that much stronger than the six.
That's actually shocking.
It didn't seem like it was any stronger.
How did it break is interesting.
It was definitely where the carabiner was touching it.
Like the carabiner put more of a sharp bend radius
than the back of the V.
I thought the back of the V would compromise a rope.
You can see we have the spanset here
and it goes through this V-thread.
If you remove the spans,
you can actually see how it smoothed itself,
the ice away just through the pressure.
So there's no sharp bends here.
Let me explain how we're actually breaking this stuff.
So you can kind of understand context.
We have put a spanset inside of this.
Mostly straightly drilled hole.
And assuming that this isn't all sun-crusted
and that there was enough good ice here, which there is.
We're also, we use a sling to take both sides.
It wasn't long enough to go over.
And I think this really helps pull more
on the strength of this ice instead of like straight up.
And then these pulleys,
they're rated for 48 kilonewtons here at the eye
because it's the plates that break.
We're obviously not going to get 48 with just us pulling.
But we found that a five to one
with a bunch of people pulling is way more efficient
than like an 81 to one with one person pulling.
Here, we don't have a lot of distance left,
but we don't need that
because these aren't super stretchy samples.
Not having a grigri in here makes it easier to,
you know, we don't have as much friction.
But if you're pulling, you kind of have to keep pulling
or you like, you can't reset.
Like you can all take turns shuffling the ascenders.
But as you saw in the breaks so far,
we have everybody sitting down.
This is not a terrain we want people falling on.
Been working great.
I think what was our record on the last video?
26.
So we got 26, which actually is perfect
because you really don't want more than that
on a line scale three.
Once you hit 30, the screen breaks.
The body will be super safe.
The body is rated.
The screen is rated to 30.
A little tension.
Okay, do we like how straight in line we are?
Three, two, one.
Wow, look at the spray all over the rock here.
Oh yeah, you can see the threads here.
It's a V thread.
Do the grand reveal.
What?
Oh, what did the other one break at?
It's like 11.
So the ice is only 3K and more,
but the rope still has life in it.
Because this eight to eight breaks at 18.
We got more life in that.
We should pull it again.
Shall we stick it in a deeper hole?
Find out the strength of this in a loop.
Making another V thread.
Sometimes it's nice to leave your first screw in there
while you're placing your second screw
so you can see the alignment.
Because you can miss it, right?
You can be like-
Yeah, you can easily miss it.
I do imagine this one being stronger than the other one.
Because it's on a more like a flat,
like it's more like inside.
So let's get in our rowboat.
In three, two, one.
Three, two, one.
No damage, my friend.
What do we have to say about that?
Well, there's damage to the ice though.
Oh, I can see this one was more shallow.
This one was longer.
And you had like a metric inch
that you could have gone deeper.
Grand reveal, 15 series.
Ah, we're pretty close.
But this was a V thread, right?
This was not an A thread.
Correct.
Well, based on our fake orientation of gravity.
So we've been talking about grain structure in ice.
In waterfall ice,
which is what most people around the world are climbing on,
you have this grain structure in the ice
that causes it to shear in the horizontal plane.
That's why you'll sometimes have entire waterfalls
collapsing.
Okay.
And that's why you see like sometimes this flat,
clear breaks.
But here in the glacial ice,
the glacier rotates.
So we'd have chaotic grain structure here.
So changing from a V thread to an A thread.
Yeah, A threads are the V thread
basically in a vertical alignment.
So there's not a lot of value in testing that here
because you're not gonna test the grain.
Yeah.
If anything, you're testing the rope,
which isn't breaking on us.
Yeah.
You would have to do a much deeper V thread
with the big drill.
To break the rope.
Yeah.
Should we do that?
One big drill final finale?
Yeah, yeah, yeah, yeah, yeah, yeah, yeah, yeah, yeah, yeah.
Go, go, go, go, go, go, go, go, go, go, go, go, go, go.
So this test is gonna be pretty intense.
So we have a fuse here.
This will break before the light scale three screen.
And because last time it broke,
all of this went flying in our ice screw video.
Now we have this as a backup to the fuse.
And then we have this catching system.
This is what's gonna catch our thing
if it goes this way.
Basic, your overhand thing again?
Your overhand falls through.
Okay.
I think it's gonna put a lot more force
on the top of this,
but it's still not gonna break it.
The bottom of this rope's gonna see almost no force.
Three, two, one.
Ah!
Don't need the hand warmers anymore.
When you have that much rope in the system,
even just that bigger thread,
it just stretches so much,
you couldn't even break the carabiner.
Whoa!
What the hell?
So this saw very little force.
I mean, it's compressed a little bit there,
but most of it's at the top.
If you did an eight thread,
you would have more force on one of the holes.
I know it might break lower even in this green,
but too cold to find out.
If you wanna see more, hit the subscribe button
so we eventually do it.
What?
Wow.
Strong guy.
Yeah, yeah, our carabiner didn't break.
It almost, it was almost there.
I don't think you need it stronger than that, do you?
No.
No?
I could highlight on that.
Wait, I did.
And you can see that video right here.