Solo Diaphragm Pump Backpack Sprayer Model 475-101 Assembly

DirtFarmerJay
310 followers
12 Video Views·Sep 17, 2013
Watch as Dirt Farmer Jay unboxes and assembles his new Solo Backpack Diaphragm Pump Sprayer and discusses the differences between a piston and diaphragm sprayer, explaining the proper use of a diaphragm sprayer for wettable powders and liquid formulations.
I'm DirkFarmerJ here from DirkFarmerJ.com. Today we're going to do an
unboxing and quick assembly of a Solo backpack sprayer. It's their diaphragm pump
model. This model is the 475-101. We're going to look and see what comes in the
box. The pre-assembled unit right here, as you can see, it's pretty much assembled.
You can see it's ready to attach the actual wand onto the end right there. So
there's the trigger assembly and all of that. Going around the side of the unit,
you can see it already has the straps attached as well. So all of that is
there ready to go. Now secondly, what comes in is a bag that has some other
parts. As you can see right here, here's the plastic bag. I just sliced it open.
Here you have the strainer container that goes in the top of the tank itself.
There's a set of different tips and filters that come down here. And then
there is the screw-on cap that goes on the top of the unit itself. Let's not
forget a great instruction manual. It doesn't take very long to go through it
and it's a very complete, including some, as you see right there, some different
sequencing of parts which are all included to build different patterns that
you want for your spray. A couple more things. One is the handle that will end
up going attached to the side that you operate while you're carrying this on
your back. And then also we have the actual wand itself here that attaches
very quickly. It comes pre-assembled with a strainer and the brass adjustable
nozzle that just allows you to do general-purpose spraying. It is one of
the combination listed right here on this. It's actually number two right here
that shows that that pattern. Okay. One other point before we actually get to
the assembly of the unit, and that is why does Solo offer two different kinds? A
piston pump and a diaphragm pump? Well the answer is actually right here in the
manual itself. And if you look here it says Model 425, which is not the one we
have, that is the piston type, is for liquids only. Model 475-101, which is
what we are looking at today, is for wettable powders, water soluble
solutions, and liquids including bleach. However, if you use bleach you can only
use the plastic parts that comprise a spray nozzle because the bleach is
corrosive to the other items. Okay, let's get started assembling the unit. First of
all, in the earlier part of the video I called this the wand. It is not. It is the
actual handle unit, and it's what's going to allow you to operate the spray
unit when it's at pressure. Here's the pre-assembled unit. All you're going to
do is install this. It's really simple. You're just going to take that unit, insert it
right here, and screw down the collar here. Pretty foolproof. It just goes in
really easily. And this is where you would adjust whether you like the handle
to be under your palm or under your fingers. So the way this is set up right
now, I would spray it this way. If I wanted to be doing it the other way, I
would turn it this way and then tighten it down. Don't over tighten it. It's all
plastic and you can feel when it's it's right. So there we go. This unit is ready
to go on this part of it, on the spray handle itself, as well as the wand. Okay,
now the second order of business is to install the pump handle. And this is what
allows you to build pressure using the diaphragm that's built on the unit.
Here's the thing to remember with a handle. The handle needs to be installed
this direction, with this going towards the operator, towards where you'll be
operating it. And in its stow position, it sits just like this. We're going to start
by putting the bolt through. And what you're going to do is rotate this back
and forth until you can see the threads appear. And it'll take a little finessing
to do that. They are threaded on the shaft. And when you go ahead and drive
that in, notice that there's a washer on there because you want the head of the
bolt to bear on that instead of crushing the handle. And when this comes
through, not only is it threading on both sides of the shaft itself, but to make
sure everything remains securely. So they'll provide you a nylon insert nut
that'll stop the vibration or just use of time backing it off. I'm not going to
take time to tighten it up. You just put your wrenches on it and tighten it up. Now,
you now have the unit almost completely installed. The only thing you need to do
at this point, use this strainer basket on the top. It simply drops in the top
like this. So this goes down in below the surface and it just kind of sets along
in there. So then you would simply screw this on and it just screws in. And once
it bottoms out, the unit is ready to put on. The last thing we're going to do is
attach the straps down to the bottom of the frame. And there's kind of a high
pressure hook that goes on there. It takes a little finessing again to get
that on. I'll show you the trick that I do to get them on there. First of all, take the
unit, put it on its back. You're going to take the hook. There's the hook right
there. As you can see, the diameter there is under pressure. It's going to be
significantly smaller than that. But to get it on there, I just use one of these
ratchet type of clamps like this and simply use it to assist on pressure. And
go ahead and push that in like that. There it is. And there you have that
clipped on there. So you would just simply step and repeat. Do the other side
right there and the unit is ready to use at that point. If you have any insights
about this type of equipment or this particular unit, feel free to offer it up
there for other listeners and viewers as well. And be sure to visit our other
areas on DirtFarmerJ.com. There's all sorts of areas related to culinary arts,
yard work, yard equipment, gardening, all sorts of things we think you'd enjoy.
Until the next time, I'm Dirt Farmer Jay from DirtFarmerJ.com.
