Product Review Troy Bilt Straight Shaft Gas Trimmer Model TB675-EC

DirtFarmerJay
310 followers
2 Video Views·Jun 1, 2013
Dirt Farmer Jay recently purchased a new gas trimmer for edging the lawn and trimming back unwanted weeds and field grass. Watch as Jay un-boxes the product, goes through the assembly process and - in a future video - shares his experience in starting it up and using it for the first time.
Dirt Farmer Jay here from DirtFarmerJay.com.
You know, I've just bought a new string trimmer for my yard.
I had a curved shaft, two-stroke one, for about 10 years, and I finally wore it out
and I decided to invest in one of the new straight shaft four-stroke models.
And I've had a good success with the Troy-Bilt brand, so I decided to go ahead and buy one
of their models.
I bought it at a big box store here recently.
It cost about $200, and what we're going to review today is the straight shaft gas trimmer.
It's a TB675EC, as I said, from Troy-Bilt.
Now, this is a great little trimmer by all appearances.
The first thing I'm going to do is just kind of unbox it.
You're seeing the retail packaging over there earlier, and that's what the package that
comes in.
I have a little bit of feedback right off from my friends at Troy-Bilt.
The packaging, I don't think it's up your best effort.
It's a little bit lightweight.
When I carried the unit home and started to carry it out, the bottom of the box couldn't
support the weight of the engine head and all that, and it started to drop out.
Fortunately, it was only a couple inches above the garage floor, but nonetheless, if you
look over here, this is what came out of the bottom of the box, and it actually split the
whole thing like this.
No damage to the unit itself, but this was a little inadequate.
So my friends at Troy-Bilt, I'm going to say, take a look at your packaging there a little
bit and beef it up because it's a great product by all appearances inside.
Second thing I wanted to mention right off is there's a little QR code up here that you
can go, use your smartphone, and get a quick video.
You're not going to need it because you're looking at this one, but there was a little
bit of a problem with that video as well.
When you tuned into that, it didn't go directly to this product.
You had to actually go through some sub things, et cetera, et cetera.
So that's just a little heads up on that, but let's look at the product itself.
Overall, by all appearances, it's a good product for the price.
This is not a commercial unit, but it's not a lightweight unit either.
I'd call it mid-range, the components, everything certainly fall in that area.
And when you buy this, since you're going to get it in the pieces you see before you
right here, what you're going to get is the unit pretty well pre-assembled with the main
shaft.
We'll have that out on the table in a moment.
You end up with a whole bag of parts and manuals and that sort of thing.
This comes pre-assembled.
There's a set, a quick start that's assembled right on to it right here.
The head, which is called a bump advance head, is already there and it's ready to roll as
well.
And then the only thing you're going to need to assemble this are two tools.
One, you're going to need a Phillips screwdriver, a number two Phillips, and you'll need a three
eighths inch socket.
And those are not used heavily either in this.
We're going to have this whole thing assembled in just a few minutes.
Now, Dirt Farmer Jay likes power tools, so I like to use my number two Phillips to replace
this is this.
Having said that, remember you can do a lot of speed with this and a lot of torque and
that this is a variable speed.
You can slow it down, do the job it needs to do, and you can use this just fine.
Just don't over torque things.
That's all I'm saying.
Okay?
All right.
Well, let's go ahead and jump in.
Let's get rolling here.
The first thing you're going to do is prep this unit right here.
Now, the first thing we're going to put on here is the guard head and that comes in this.
We'll come back to the other contents of the bag here in just a moment.
Guard head is in here and I'm going to pull off the gas treatment they give you.
That's the head that actually protects you.
When this unit's running, the speeds it runs, whatever the rotational speed is right here
at the center of the hub, the tip speed out here is exponential.
So when these things are whipping around, they can really throw even low-weight items
with a great amount of velocity and can become a projectile.
And if you like your windows, you want to make sure your car doesn't get dinged or take
out a windshield, or you like just your own legs, don't wear shorts, flip-flops, that
sort of thing.
Be protected.
But one of the things that's the first line of defense is right here.
This deflector has a cutter on the end to self-trim the length of the strings too.
The way this is assembled is just really easy.
You can see right off, the screws come from the factory already installed in pre-captured
nuts down at the bottom there.
So we're just going to back those out.
And that one is a little tight.
That's all right, I'll tell you what, that's what this comes in for.
I'm glad that they put them in secure enough that they don't get lost in the package.
Okay?
So you can see these screws come out really easily.
And when that's done, then what you're going to do is assemble this right like that.
It's really easy.
You're just going to lay that down through there, drop the screws in, let them find home,
and then on a slow speed, again, don't run these all the way in.
And by the way, don't put one side completely in before you go to the other.
Make sure you get it centered well.
There we go.
Now I'm going to let the drill do a little bit of impact driver to make sure it's in.
That's it.
That's ready to go.
As you can see, it's ready to go.
If I take the shaft down at this end and rotate it, you can see that's going to spin like
that, okay, when it's in use.
All right, that's what we've got for this unit.
Now let's go to the other part out of this.
By the way, I want to just mention, I like to make sure I warranty all of my products
right away just in case there's a problem.
I usually don't have problems with the equipment I buy of this grade, but every once in a while
something fails or there's a recall or something like that, if it's under warranty, these
companies just do a great job of just following up with you, et cetera.
They want to make sure they maintain a great reputation out there.
And whether it's Troybill or some of their competitors, I've had the same type of experience
with them.
But here we go.
We now have the main unit where everything's preassembled here.
The only thing we're going to do with this is we're going to put the handle that we would
actually use this in when we're out doing the work here.
So I'm going to kind of move some of this off, give us a little bit more space, move
that out so you can see it clearly.
And all we're going to do right here, I'm going to remove the screw that, again, it's
pre-attached.
There's a captured nut on this side and there's the bolt that goes in.
Now it's a little bit tight, although no, it looks like it's coming out.
Just a little tight for my fingers, that's all, getting it in there.
So when I pull this out, now I have the unit that I'm actually going to hold when I am
doing the string trimming out there.
What I have here is you're just going to pop this down over the shaft, like that, okay?
It's on there.
You need about, oh, six inches, somewhere in there.
About there.
And in reality, you're going to adjust this when you're out there using.
It'll swivel this way, it'll go up and down the shaft because of the type of fastener
they've got here.
And this is really just pinching that shaft, but not going through it or gripping it too
strongly.
So we're going to go ahead and take that in there, put it across until it engages the
threads right there.
And now I'm just going to use my little socket wrench.
No wonder, got it on reverse.
There we go.
Now notice I'm not really torquing this down.
Matter of fact, you can see I'm just barely using one of my fingers there to do it because
it just doesn't really need to be tightened that much.
There it is.
See how it'll pivot around and adjust to me or what angle I'm trying to use the unit when
I'm out there running.
Okay, we've done the main assembly and the two subcomponents.
Now let's go ahead and put the two together.
There's a little protector sleeve in the end of this main shaft.
That comes out.
If you go to the other unit, it has also a protector on the end.
We're simply going to pull that out.
And when we do, you can see it's ready to go and ready to be mounted on here as well.
It's really simple.
So all we're going to do is put this in, and I'm going to rotate this real quick before
I do it.
This is the engagement point right there.
That's what's going to hold it in and engage these two pieces.
And then you're going to help that stay in by doing a little bit of tightening with that
knob.
But here we go.
I'm going to turn this here.
Now what's interesting, I want to point this out.
I'm going to rotate this around.
Notice there's two holes.
One's here.
If I engage it here, that's the most common place to install.
I could turn it this way if I had a machine that I wanted to, I was holding it like this
but I wanted to do a little bit more vertical trimming, or this unit was being used for
some of the heads that it comes along with.
But this is the recommended position right there.
That means it's going to be assembled just like that, right straight in line.
You see that?
Okay.
So now we're going to just take this really easy.
All's I'm going to have to do is push that and then push the two together.
Bang.
That quick.
And then I'll go ahead and just take this and rotate this clockwise in like that.
You don't have to do it real tight.
Just keep it secure.
This dude is ready to roll.
Now the next thing you're going to do is put the oil in the engine.
This is a four-stroke engine, meaning that it does have a little sump of oil in it.
A two-stroke engine gets its lubrication from the fuel oil mix.
And small engine manufacturers strongly recommend that you don't use fuel with a high amount
of alcohol content.
The reason for that is alcohol in fuel tends to lead to water in the fuel, and water does
not do well in these small engines.
So some of the manufacturers sell pre-measured cans of mixed fuel.
It'll run for quite a bit of time on one of those cans, or if you have to go right down
to your local gas station and buy ethanol-based gasolines where some of that's been mixed
into it, then you would use these kinds of stabilization fuel additives that are put
in there.
And as you can see, there's a sample that's applied right off as a courtesy and to get
you started correctly by this manufacturer.
Now while we're here looking at this before we put in the fuel, let's look and see what
also came in the bag here.
First of all, there is a nice operator's manual.
Dirt Farmer Jay saves every one of these in files by alphabetical because I utilize these
in the future to order new parts, spark plugs, you know, what the capacity of the oil is.
All sorts of things are just great references, and if I ever sell the tool, it's a great
courtesy to pass on the manual to the next buyer as well.
Here's another thing that comes in here, and that's a product registration card.
And as I mentioned earlier, I've already registered this online.
I found it to be painless, very quick, their site's intuitive, it's responsive, they don't
ask a lot of invasive questions, and everything I successfully registered probably in about
five to seven minutes.
Next thing that's on here is just a little attention, a little advisory deal that this
particular one's talking about, an overspeed control that's in here and what it does, and
how the machine's going to behave because it has that in it.
Next item in there is the string installation instructions that have to do with the bump
head on it.
So very clear, very intuitive, takes 20 feet of line at a time.
With one time through it, you'll have that thing ready to go and roll ahead, okay?
And if you don't like the bump head on it, there's many manufacturers out there, they're
readily available, where you can put another whisker type or those kinds of things, there's
things out there.
But it looks by all appearances that this is a great head, and what we'll do is in a
future video, just in the next few days, I'll actually test it and I'll give you my feedback,
unvarnished, good, bad, and ugly, whether I like the way the unit runs, how it's balanced,
the head, and et cetera.
Okay?
And the last thing that is in here is some federal required paperwork.
This particular paperwork has to do with emission control on here, how much emissions this puts
out, and that it's compliant in certain states, et cetera, et cetera.
So that's all in there.
All right.
So it's really interesting.
Another thing that was in that bag is that bottle of oil.
Now, look how little this bag...that's it.
I mean, it's smaller than my pumpkin head, right?
There's just not much oil in this, and the reason for that, the crankshaft in this unit
is, or the sump, is quite small.
Not putting enough oil in is just as bad as putting too much oil in.
So you're gonna be very precise in the amount you put in, and if you look close, you'll
see that several of manufacturers, a collaborative approach to this...Troy Build, of course,
I believe is right up in that area there.
But you can see that this is a common approach by these manufacturers, that you're using
this specific...and this is standard weight 30 non-detergent oil, as my understanding
says right down there, HDSAE 30.
So we're just gonna put that in there.
All right.
I will actually, in the follow-up video in just a few moments here, we'll actually fuel
this up, and I'll put the oil in it, and we'll fire it up.
And you can see firsthand, does it fire up as it should?
Did everything go as it could?
And we'll be right back with a flash of the video.
