Plastic zip-top bags are one of the handiest modern conveniences in the kitchen. They are sturdy, and when closed properly, protect the contents well and prevent spills.
They are robust enough to be reused in many situations. If the bag has no holes in it and has not had meats or marinating meat in it, they are quite easy to wash and reuse several times before going to the landfill. We make several uses of the same bags that have held salad greens, dry goods, veggies, and cereal products.
All it takes is a quick hot soapy water wash, rinse, and dry on this whimsical drying rack.
This great DIY project is simple, inexpensive, and the results are really fun. You will have a practical kitchen device you’ll use for many years (ours is over 20 years old!). In fact, why not make some extras to either use as a decor item in the kitchen (it looks GREAT on the top of the upper cabinets) or as really cool gifts?
And, check out this method for drying bags that is easy and uses what you have on-hand already! https://youtu.be/vRfNDtkJWSk
Do you have a great idea you’d like to share with your fellow DirtFarmerJay viewers? Send us a comment, and if we use it, we’ll give you on-screen credit!
Hey Dirt Farmer Jay here from DirtFarmerJay.com. If you are like us, you like to give things multiple
lives. That is, instead of just buying something using it and throwing in the trash can, if you
can get it to do double or triple or even beyond that duty, it's a great thing. What about these
dudes? Well we've got a great little process that shows you how to get multiple lives out of it and
have some great home decor at the same time. Stay tuned. Hey Dirt Farmer Jay here from Dirt Farmer
Jay.com. So let's go ahead and get started on this cool little project that'll allow you to
repurpose and use several times those zip lock type of bags, storage bags. Now something I'm
going to say, we don't generally reuse ones that we've had meat in it, like chicken or beef,
something that's like that, just to keep it sterile. But things that have been like lettuce,
dried goods and so forth, washing them out and using them many times is a smart thing to do.
And we practice that with other things like these types of sports drink bottles. These become
bottles that we use around the house. They're really handy during the summer when you're
working out. We keep a big old stock of them in both our garage and main kitchen refrigerator.
And the other thing, and you can see this on one of our other videos, we reuse all these little
plastic bags you pick up from major retailers. And we'll show you in that other video, you can
see it at the end card, how to actually wind these up. These are extremely handy from everything from
pet cleanups, if you catch my drift there, as well as just getting something together,
carrying something to gift to somebody or just little trash disposal bags we use in our vehicle.
So get as many uses out of these as you can before you put them in the actual garbage can.
But let's talk about how to build this cool little project. This is a great little intro project.
And even if you don't end up using it to dry these kind of bags after you wash them,
it looks great on the counter. As a matter of fact, we have family members that just use them
as decor items. They've been around in our family for many years. But this is a pretty straightforward
little project. You're going to start with a base like this. And you can either buy some of these
at crafts type of stores like Hobby Lobby or in our area, Joanne Fabrics or Michaels, those sort
of things. Or you can make them yourself like I did here. And this is approximately five inches
wide by seven inches long. You can modify that around. And by the way, you can check down below
in the description, there's a link down there for just a sketch giving you all the dimensions.
And so you can just reference those when you build these. If you're going to build one,
build a couple and give them away. Although I'm just showing a single set here today.
Five by seven, three quarter inch. I routed a little nice profile on the edge, sanded it up
and varnished it with a nice type of varnish like this, something that's going to really resist
water. I like the oil base, but you can do water base as long as it is more an exterior type of
varnish because you're going to drip water onto this. It's in the kitchen environment. So go ahead
and give it the protection it needs with the great finish. So you've got the base. The next
thing you need is some little foot bumpers like this. These are clear bumpers. This costs probably
about two bucks. And what these bumpers are going to do is raise this off the counter so that water
that does pool around on the counter doesn't get on the bottom edge of this and cup it. You want
this to stay nice and dry and flat. And these bumpers will do that without corrosion or marks
on your counter. Next thing you need is some three eighths inch dowels. And these are three
eighths inch holes that I've drilled kind of like in a triangle here. Again, the drawing will tell
you where those are placed. And I like dowels to be about 11, 12 and 13 inches high. Gives a little
bit of interest and separation. So these little dowels are ready to insert in here. And then
there's a little series of birdhouses here that we've made. Now these are actually started just
with stock like this. This is a common nice piece of two by four. We sanded it. Then I ran it through
the table saw with the blade set at a 45 degree angle. To make a piece of stock like this, this
happens to be one of the taller ones. It's kind of a mid-range one actually. You can do them
different sites. But it is one of the taller ones versus one of these little short guys like this.
All right. So these are about one and three quarter inch long. About one and three eighths
wide. And then there's some various heights. Again, look for that in the drawings that are
provided below. But they all start out this way. And then you just cut them to length either with
a miter box, a hand saw, or in my case have a nice compound miter saw with a nice finish blade.
And I'm just going to cut these into sets and make them. We're going to take this stock after we've
cut it. And we're actually going to drill some three eighths inch holes right below it. Some
eighth inch holes where type of perch material. And that's just regular eighth inch dowel. You can
see a full length here. We cut that in there just to give it a little bit of whimsy. A little bit
of depth. And then you're going to get some outside corner. Now the outside corner is sold
as a molding at your home center. Sometimes they will carry this large. Other times they don't.
But what you need to make this work is one and a quarter outside corner. So make sure you're not
getting one inch because it won't cover it unless you downscale everything else. We found this size
to be really good for drying those bags because after you put the bag over and let it suspend down
this forces the bottom of the bag open nicely allow air to circulate and for the bag to dry
quickly and adequately. All right we go ahead and pre-paint several of these. Put them all together
as you can see they're kitted already. And now the fun begins. So the first thing we're going to do
is I'm going to go ahead and put these on the bottom. Okay so there we go. We have these nice
four little rubberized feet that moisture doesn't matter and you've got this nice base to set it on.
So it looks great on the counter. It doesn't slip very easily. So now we've got those. Now what we're
going to go ahead and do is put the dowels in. I kind of like the short one up front and then the
others but this is your project so you can just go ahead and put it the way you like. We're going to
go ahead and put a dab of glue. When you go to insert the dowels I like to get you can see there
was a label there we're going to put that down in there but to make these easier to insert it's
always helpful to chamfer the end slightly. Round off that with a 45 like this and get those so that
they're easier to insert in these holes. You don't want them to be loose but you also want it to fit
nicely as you put it in there so you're not splitting anything. And so over time you want
these to stay perpendicular and not be floppy. So we're going to go ahead and start the first one
and tap that in. There it is. It bottomed out nicely. Then you can choose either one of these.
All right now you have your purchase. You can see the glue is working just fine.
Got a little bit of glue that was starting to come out at these corners.
And now just to make it really easy to deal with I'm going to actually spray a little bit before I
put the top on. Here we go. Notice I did not spray at the top because I want the glue there
but that allowed me to handle the whole project when it wasn't completely finished. All right
it's up to you of which ones go where. I kind of like the large one back in one of the corners here
but again it's up to you. Now we're going to go ahead I should have chamfered each edge but let's
just see here if this will fit okay. Nope we're going to go ahead and chamfer them. Epic fail on
screen but that just shows you just the things you need to keep an eye out. So we're going to
go ahead and chamfer that a little bit. All right we're going to go ahead and put some glue here
and you can choose whether you want this to be the front of the rack or you want the other side so
you can turn the birdhouses the way you'd like them to be. Using a soft base hammer like this
allows you actually pound that on and of course you're going to keep these parallel or perpendicular
to the front edge so you wouldn't have them going off an angle unless you just like that kind of
thing. It's your project remember. All right so now here we are we're going to go ahead and sand off
some of this. All right let's go ahead and make sure these are on line with each other.
So that looks pretty doggone good. That one can be adjusted just a hair. There we go.
All right now you have all of these in place. Next step then is just to go ahead and varnish
everything again. Hit the back edges. All right there you have a nice little finished project
right there that'll look beautiful sitting on your counter or up on the top up here. It's a great way
to do something practical get more uses out of something and do it in a really fancy dancy way.
Hey if you have a tip like this you'd like to pass on to your fellow viewers won't you say
something about it in the comment section below and we'd like to give you cred for it if you do
so send us your ideas and if you found this video to be helpful won't you like it and better yet
subscribe to our channel ring on the bell so that you'll get instantaneous notification every time
we put out a video about the home the shop the kitchen or great product reviews we'd love to
have you watch us in the future episodes. Hey until the next time this is Dirt Farmer Jay from DirtFarmerJay.com