How To Safely Operate The Kubota K008.3 Mini Excavator

Full House
57 followers
40 Video Views·Nov 5, 2022
In this video you will learn how to safely operate the Kubota K008.3 Mini Excavator.
WA Excavator Hire is a family run business specialising in limited access digging machine hire affording you a quick and effortless solution to shovel and wheelbarrow tasks.
We understand the importance of delivering fast and reliable service to the DIY or construction industry. Our team can arrange for 24hr pick up or delivery to suit your needs
Hi, I'm Andrea from WA Excavator Hire and today we're going to talk about how to safely operate
a mini excavator. Today we're looking at the Kubota K008.3. All of our machines have stickers
outlining the personal protective equipment that must be used when operating a mini excavator.
We also require you to scan the QR code and read the manufacturer's operator's manual before using
any of our equipment. Greg will now take you through the finer details of operating the machine.
Whilst the Kubota K008.3 may appear to be a small machine it still presents the same hazards
and risks that some of our larger machines present. It's important before operating any
excavator that you ensure the surrounding area is clear of animals, children, overhead cabling
and be aware of any drainage or cables that may be underneath the earth's surface.
Dial before you dig is available by dialing 1100 a few days before you intend to use the machine.
This will provide schematics of any drainage or hazards beneath the earth's surface.
Andrea went through personal protective equipment and pointed out the safety stickers and QR codes
located on our machines. I would recommend that you do familiarise yourself with the PPE that is
required to ensure your own safety and that of people around you. When climbing on board always
ensure three points of contact. There's a handle located on the rollover protection bar and another
along the front of the controls of the machine. Step up onto the control surface. Once seated
there's an adjustment handle on the lower right hand side of the seat.
It's important whenever using an excavator
that we firmly attach the seat belt prior to starting the machine up. Start the excavator.
The lock lever prevents operation of the boom, the arm and the bucket. By unlocking the lever
the machine is now live. To raise the boom pull back on the right lever. To lower the boom push
forward on the right lever. To curl the bucket move the right lever to the left. To uncurl the
bucket move the right lever to the right. The left lever moves the arm in and pushing it forward
extends the arm away from the machine. Moving the left lever left and right slews the house of the
machine. The two control levers can directly control the left and right tracks. To move forward move both
levers together. To move backward move the levers aft. To turn the machine to the right we move the
left lever forward more than the one to the right. It's important to note if the house is reversed
the control levers still operate in the same sense. By moving the levers forward in this position
the machine will move in the opposite direction. To raise the blade pull back on this lever.
To lower the blade push forward. The Kubota K008.3 has a unique feature where you can offset the boom
allowing you to dig trenches close up to buildings. The pedal on the right hand side
allows left and right movement of the boom. There are two pedals located on the left hand side of
the machine. The larger one used to operate any auxiliaries such as post hole augers or rock
breakers. The smaller pedal used to provide extra acceleration when traveling forward or aft.
The Kubota K008.3 is a narrow access excavator. With the tracks retracted the width of the machine
is as little as 700 millimeters. I'm now going to demonstrate how to move the tracks
from 860 millimeters to 700 millimeters.
We start by lowering the blade and lifting the front of the machine off the ground.
We then slew the machine 180 degrees and lower the boom to raise the machine up off the ground.
The lever on the floor of the house converts the blade handle to now the operating handle
to change the tracks. By pushing forward the tracks are now in the narrow position.
Putting the lever on the floor back to the original position now gives us control of the blade.
The final step is to remove the pins on the blade and fold in the tips to allow the blade
to transverse 700 millimeters. When operating in the narrow position we need to remove the extensions
on the blade. Start by removing the pin, fold the extensions in and reinsert the pin.
In this position the blade will be the same width as the tracks and allow you to access
areas as low as 700 millimeters in width. Repeat this function on the other side.
If extra clearance is required above the machine, such as when trailered,
the ROPS can be lowered by removing this retaining pin on both sides of the machine.
Remove the pin, lower the arm and reapply the retaining pin on both sides. Remember
prior to operating the machine ensure the rollover protection is returned to its operating position.
Remove the retaining clip and place it back in to the locked position on both sides. This concludes
the video today on how to operate a K008.3. Remember for any digger or narrow access
machine hire requirements give us a call at WA Excavator Hire on 0466 964 739
or locate us on the web at waexcavatorhire.com.au
