Smart Film Inside Out: Let's Cut It, Bend It, Break It and Fix It

Full House
57 followers
19 Video Views·Nov 19, 2022
Wondering how smart film is installed and how durable it is? In this video you will see what happens when smart film is bent, cut, scratched, delaminated and much much more. You will also see what types of damage are fixable, what types are not and how to remove dust from privacy film.
Everyone can see that smart film switches glass from clear to frosted but most people have no
idea what you can and cannot do with privacy film. Today I will cut, bend, damage, burn and
peel apart smart film so that you can really understand smart film inside and out, how it
piece of film has buzz bars. As you can see here there is one buzz bar on this side and another
on the other side. The buzz bar attached to the film using conductive silver paste
to increase conductivity of the film. Watch as I connect the film to a power source.
See now it switches from clear to frosted when powered on and off. If those buzz bars get pulled
off the film due to improper handling the film will be no longer switchable. Smart film is a
low voltage and works in the range of 30 to 60 volt AC. AC stands for alternative current which means
there is no plus or minus. It makes the wiring installation safer because you cannot burn the
film by mixing up the polarities. Our transformers come with remote control. You can use this remote
or you can wire the film to operate with a wall switch or a button or a home automation system.
You can control the film with your smartphone, siri or alexa. Now I will demonstrate how you
can easily damage the film. You will create creases if you apply excessive pressure to the
film. Try to avoid bending this smart film and never fold it. Why? Well, let's bend this piece
of film. Watch as I apply pressure to the film. Boom! You see the places we applied the pressure
are delaminated and damaged. When the film is powered on those delaminated spots fail to become
clear. See all these marks on the pdlc layer? This is where creases have been created. This is what
it looks on the inside. See all these marks on the pdlc layer? This is where creases have been created.
When a piece of smart film is small it's pretty hard to damage it but with larger pieces it can
easily be damaged when you improperly handle it. Ideally two people should be handling
the large pieces as this is the most common way that smart film becomes bent and damaged.
The person who orders the film is often not the person who will be installing it.
So it is important that whoever performs the installation receive all the information they need
to do successful installation. We provide a detailed installation manual with all our orders.
Check our video on how to install smart film. Let's cut the film. You may need to cut the film
on side for example when the installation area is not perfectly square like our window or the film
is too large. To do that you will need a ruler, marker and a pair of tailor scissors or a sharp
knife. To start place the film with the adhesive side facing up. Draw a line where you want to cut.
Now I will show you what happens with a dull blade. See I applied substantial pressure
but the film still is not cut through. However you can see a mark where we trimmed
to cut the film and the two layers inside the film has become delaminated and this damage
cannot be fixed. Only one layer was cut through the other layers was not cut. Let's do another
cut with a sharp blade. See now we have a very nice and straight cut with no signs of delamination.
Another option that I would like to share with you is simply using a pair of tailor scissors.
Again first you draw a line and then use the scissors to cut along the line.
See the cut is much cleaner and this is much easier. Scissors are the best options because
they cut the film without putting pressure on the layers that could cause delamination.
If it's necessary you can cut the bus bar just like you cut the
smart film. If you need to do any cutouts for handles or hinges for any type of hardware
first you apply the film on the glass and when it's properly attached you take a knife and cut
out the film. Making cutouts and holes will not damage the film and it's still working.
Let's see what happens if the film gets burned. I'm taking a torch and applying the flame to the
smart film. See the film melts but does not catch on fire and as you can see the rest of the film
is still working. Smart film does not catch on fire easily and that is the part of why it is
safer electrical product. Smart film is very reliable. We just bent it, burn it, cut it and
it's still functioning despite the damage. If the smart film is installed properly it will last a
very long time. Smart film that we installed nearly a decade ago is still working today.
The quality of smart film varies greatly from supplier to supplier as do the prices. When
selecting smart film it's important to prioritize quality to ensure you have a durable product that
won't delaminate or discolor over time. Thanks for watching this video. I hope you have a better idea
of what smart film is, how it works and how to avoid damaging it. Subscribe to our channel and
learn more about switchable glass technology. Visit our website for more information and to
start your order. Thank you for watching!
