Basic Operation of the Kubota Mini Excavator

Full House
57 followers
34 Video Views·Nov 3, 2022
Learn about the easy-to-use controls on your mini excavator before starting your next outdoor project.
Every machine is equipped with an owner's manual.
It's good to get an idea of what the controls are for.
Also, an important part of the owner's manual is the lifting capacity of the machine.
You don't ever want to overload the machine for your safety.
Okay.
So at this point, let's go ahead and put you in the machine using a careful three-point-of-contact entry.
Three-point-of-contact.
Yes, you want to reach here, here, and your foot right there.
And you always face the machine as you go in.
Okay.
We'll try that.
Good.
Now, once you're in the machine, you're going to want to put the seatbelt on.
Okay.
The only way the rollover protective structure works is if you stay in the seat in the event of a rollover.
The seatbelt will keep you inside the structure, and that's the importance of the rollover protection system.
To start the machine, it's just like your car.
Turn the key.
Now, as the machine's started, you have this lock lever right here.
Right now, all the controls are dead.
Nothing's going to work on the machine until this lever comes down.
Okay.
So, when you bring that lever down, it's ready to go.
Let's do it.
Now, we've got two pilot control levers here.
The right one, the way it's set up, will move your boom.
This is considered your boom right here.
Okay.
So, if you pull that back, your boom is going to come up.
This is considered your arm.
So, if you pull the other lever back, it will bring your arm in.
Well, what else do I really need to understand in here?
I see these things right in front of me.
Those are actually your travel sticks.
So, when you push this lever forward, this track will move.
If you pull it back, it moves backwards.
And the same for the right side.
And what about this other joystick over here?
What that is is a lever that will actually raise and lower the front blade.
So, as you pull back, the blade will come up.
Push down, the blade goes down.
And then back here is what I'm assuming is the throttle with the rabbit and the turtle.
I can move forward faster or slower.
Yes. As a beginner, you probably want to start out on the slower side until you get the full function and feel the machine.
As you get a little more experience, you can kind of go up on the RPMs, which speeds the entire machine up.
It speeds the hydraulics up. It speeds the tracks up.
So, it makes it more productive.
