FREE education here all day! In this video I show how I create a faux aged-bronze patina & finish. The products I use are from http://www.SculptNouveau.com . I use the “Bronze B” and Tiffany Green patina spray. Other products I use are Krylon Crystal Clear and KIWI black shoe polish. Have courage when trying your hand at finishes. Its always possible to go back and touch it up or try again entirely. Is there anything that you’ve wished had a different finish in your home? What about a picture frame or maybe a stone statue in the yard? Let me know what projects you think you might try in the comments below. SOCIAL MEDIA Follow me for more fun and see what goes on behind the scenes in my studio. I can also be found on: http://www.Instagram.com/jonburnsfineart/ http://www.Facebook.com/jonburnsfineart/ http://www.LinkedIn.com/in/jonathan-burns-08a05b35/ BOOKS - technical Edouard Lanteri – Modelling and Sculpting the Human Form https://amzn.to/2PxwftU Stephen Rogers Peck – Atlas of Human Anatomy for the Artist https://amzn.to/3swUwyS John H. Vanderpoel – The Human Figure https://amzn.to/2O7k46Q George B. Bridgman – Bridgman’s Life Drawing https://amzn.to/2O43XH6
BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3lYdoEk Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3ssh9Ey
SCULPTING MATERIALS & SUPPLIES CraftWrap - Plaster Cloth Gauze Bandage for Scenery, Crafts, Mask Art, Models, Molds, Keepsake Belly Cast - Each Roll 4 inch x 15 feet (Single Roll) https://amzn.to/3cwRvJg 1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins https://amzn.to/3fjUq9V U.S. Art Supply Modeling Paste Acrylic Medium, 500ml Tub https://amzn.to/3sbcXIv Autobody Panel & Trim Removal Tools (for demolding/separating your mother mold) https://amzn.to/3w9LXML Steel Hex Bolt, Grade 5, Zinc Plated Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/SAE J429, 1-1/4" Length, Fully Threaded, 1/4"-20 UNC Threads, Imported (Pack of 100) https://amzn.to/3ctbs3x 60 Pack 1/4" Wing Nuts Zinc Plated Fasteners Parts 1/4"-20 Inches Butterfly Nut https://amzn.to/3u31V9r AES Industries 294-1 Replacement 2-1/2" x 1-5/8" Curved Surform Blade (6 Blades) https://amzn.to/39q8efg Stanley Hand Tools 21-115 7-1/4 in. Surform Shaver https://amzn.to/3svUMhB JB Weld 8277 Waterweld https://amzn.to/3cwSZTQ Chavant NSP Medium – Sulfur FREE, 2lb Professional Clay (Green) https://amzn.to/31tVqA8 Alja-Safe Life Casting Alginate 3lbs (by Smooth-On) https://amzn.to/3wfZiDl Smooth-On Mold Max 30 (Trial Kit, pink color) https://amzn.to/3fkM41Z Smooth-On Rebound 25 2lbs (Trial Kit, orange color) https://amzn.to/3m0MuvI Smooth-On THI-VEX https://amzn.to/3ruTeTL Krylon Acrylic Spray Crystal Clear 11oz. https://amzn.to/3cvMDUU Premium Baltic Birch Plywood 6mm (1/4”) 12” x 24” by Wood-Ever (I give Woodever two thumbs up for quality birch ply) https://amzn.to/39q9XS2 Titebond Original Wood Glue, 16 oz. https://amzn.to/3sx2E2o Dental Tools / Waxing Modelling Tools https://amzn.to/3sJ4ai9 Sandpaper Variety Pack 24pcs, 12 grits: 120 – 3,000 grit https://amzn.to/3djpa8F
Okay, so we're moving into the stage of the patina and finishing. So,
one of the first things we're going to want to do is take this modeling paste
and just touch up any areas that we missed when I reattached the arms. This here,
it's normally used for like adding texture to two-dimensional things like
painting, acrylic painting, and whatever. But you can apply it to surfaces. Some people like doing
craft stuff with it. So, I'm going to apply it to here, just do some final touch-up,
get this prepped, and look for any other like flaws that I'm not happy with.
And once that's done, I will probably do this next. Center, drill a hole, and get that ready
for the screw. I won't put the screw in yet. It's actually a bolt here. So, I'll put the head in
first, and then the next thing that I'll do after it's drilled is apply the bronze coat,
do the Tiffany green on top of it for some aging effect, and then some black shoe polish to knock
it back, and then retouch it with some of the bronze B from Sculpt Nouveau. And at that point,
we'll put it in the base. This is already drilled, and we'll just sink the screw in
there. We'll set that, and then we can attach it. And then we'll felt the bottom,
and we'll have a completed sculpture. So, a lot of steps. So, without further ado,
let's go ahead and get started. So, this stuff is non-toxic, but I'm wearing the gloves because
it's like having glue dry to your hands. I don't know if you enjoy that. I don't.
And this stuff is sandable. This is just going to help me get a little smoother texture here.
And you want to be careful because whatever it sticks to, it'll... I mean, if you leave a glop
somewhere on accident, it'll dry. It's a glop, a really hard glop,
and you're obligated to go in there and do some sanding.
Nothing wrong with that. Just more work. So, I will list this in the description.
And this stuff helps hide seam lines a little better also. So, if you're afraid maybe your
seam lines didn't quite look the way you wanted, put this on there, and then come back and do a
little sanding. Okay, so now I have this applied. I just smeared it around with my fingers until I
felt satisfied. It dries quick enough, within about 10 minutes, that you can apply more if needed.
But I might go back through and do some light sanding, just to knock down some of these high
areas, because I don't want that texture to show. But this creates a more kind of homogeneous
surface, and we're that much closer to being ready to apply the Bronze B. So, I'm going to
wait a couple hours and double check my work. Do a little sanding, and there we go.
The one thing that I like about this stuff, this modeling paste,
the modeling paste, is that even though I use gloves, it looks like it streaked fingerprints.
So, I'm pretty happy about that.
I mean, because those little things like fingerprints add to it, I think.
And I'm not a perfectionist, and you know, it's funny, as we give ourselves that title,
thinking that somehow we reach perfection. But I've found being a perfectionist goes
hand in hand with procrastination. So, I've tried to overcome my own
obstacles with procrastinating, by striving for excellence instead of perfection.
So, I mean, there's going to be some things that are blatantly obvious,
you know, that stand out, that'll really drive you crazy.
But unless you're neurotic, and don't wear that as a badge of honor, I think you'll be satisfied
just striving for excellence, at least until you get a handle on what you're doing,
and then you can go back and perfect your craft over time.
But I definitely wouldn't try to be a perfectionist in the first shot,
because you'll drive yourself crazy, and you'll be very unproductive,
and not a prolific artist. Am I speaking from experience? You betcha. Okay, so that's that.
So, now I'm pretty satisfied. So, this is going to go pretty lightning quick, I think.
And, man, I'm not satisfied with that. Okay, so I'm pretty satisfied with that.
So, I'm going to have to move pretty quickly. I'll move this out of the way,
since we are done with that. So, the way this works is to move pretty quickly. I want to
put this on here, then I'm going to spray the Tiffany Green while this is still wet,
because there's live bronze in this. And once this dries, it's in an acrylic, so it's suspended.
It's a bronze powder. This will dry, and then this won't have much effect on it. This is a Tiffany
Green patina spray that you put on either raw bronze or this stuff while it's wet, and it will
begin to turn green. The longer you let it sit, the greener it gets to like a chalky, lime green
kind of crust. I'm not going to hose this thing, because I don't want that look, although it might
be nice. But what I'm going to do is just put on one coat of this, and just give that a couple nice
mists. So just kind of almost like a misting, or like a blanket of fog falling on it, just for a
little bit of aged look. After that has its full effect, I'll be able to see if I need to put any
more of this on, and touch up those areas directly. And then when I'm satisfied, I can put on a Krylon
crystal clear acrylic spray. Acrylic spray. That's important to note. There's a link in the
description. So, and once that's done, we'll hit it with the shoe polish. So right now, here we go.
Here we go. Recycle, reduce, or reuse. This is how I like to reuse my brown paper sacks.
I find stippling is the best, instead of brush. When you brush on that first coat anyway,
it's really thin, and it leaves brush lines. So if you stipple like that, it tends to cover better,
and it doesn't lift itself up. You want to put the brush in there for the next coat.
I don't know. Whatever method works for you. I think you get a better, more even coating.
Yeah, and it will break your bristles. These cheap little brushes.
Tiffany on here after this first coat. Sorry to not mention that.
This coat is to make sure it's thoroughly coated, and it's going to dry on you. I mean,
you would get through this before it dried. That would be a miracle, and I don't recommend
trying it. You know, be as thorough as you can on this first one, because you don't want to
get finished and find out later you missed a spot. So, you know, get a good coating,
and then when you go back through, you'll be able to cover it much more quickly,
because you're not dealing with every nook and cranny and all those little
white spots from the plaster kind of poking through it. You can just go over that. So,
like I said, just get a good first coat, then we'll go back. Sometimes it's easier to get thicker.
Put your initial glop in the recessed areas, and then you can kind of pull it out as you go.
So, like these lines down here aren't getting quite filled because my bristles aren't loaded.
So, if I just put a heavy glop in there, and then I can work it out and keep referring back to it
as I go over these broader surfaces. Okay, so we have this all covered now with the bronze paint.
It should be drying pretty well up here. I just finished down here. I can see where it's wet.
So, I'm going to give it a few minutes, and at this point, you can go grab a coffee or
tweak some ideas on your other projects you're working on. So, once that dries, I'm going to
come back and slap a second coat on it, and then give it a few mists here with the Tiffany Green.
I'll put it on a Lazy Susan and turn it while I hit it, like, and then we'll let that sit for
maybe an hour or so. Anyway, go grab you a coffee. I'll go work on some ideas, and we'll be back in
a couple few. Okay, so now this is dry. I'm going to put on my second coat, and this time,
I can move a lot more quickly, and then I'm going to apply some of the Tiffany Green.
So, let's go ahead and move here, and I shook up my can. I put the lid back on here and shook it
back up before I reapplied it because this, you know, the bronze is more dense than the acrylic.
Okay, so at this point, I've got my backdrop put up. Okay, so here we go.
I'm just going to do a couple light mists.
Okay, this stuff has a very strong vinegar smell, and you might be able to see. So, like,
where I put it on a little too thick, there's a run mark, and that'll run down. If I'm lucky,
it'll miss that dimple, but yeah, okay, it's going past it. That's good, but this stuff, whatever it's
made of, will begin to do its work. See, there's a heavy run. I don't necessarily care for that,
and I might just... Here's what I'm going to do. Sometimes when I see the run marks, I know how
those end up looking. They're really heavy streaks of green, and I just don't want to deal with that
and my finish. So, where some of this stuff is kind of more evenly modeled, I suppose,
I'm going to let that go. This stuff is still on the surface. I don't think it's even possible to
wipe it off. I'm just blotting it so it has a weaker effect, and in some of these areas where
you would naturally see it outside, like patinas, like kind of being more green in these recesses,
I think that's perfectly acceptable, and it's going to add depth to the piece. I might just
bottom side wasn't really coated, but I think I may have just done too much. We'll see. Not to
promote bad work practices, but this patina is going to help conceal flaws also, so it could
work to your advantage. It might work against you, and that you worked really hard on a specific
detail, and now it's history. Anyway, you can see this stuff is green, and I will warn you
that this has a spring and like a BB and so forth to help kind of regulate
and to suck it up and shoot it up. So, what I do, if you leave it like this, the next time you spray,
you're going to have some ferric, you know, rust iron kind of color coming out. So, how I clean this
up is I just remove it, and you can see it's still in the line, and I just spray it,
and that should suck it right out of there for the most part,
and then if you're not a purist, you can put that back in there, and I save that for next time,
and then I take this over to the sink, and I fill up this cup with water, and I just keep spraying
until I feel like that internally is rinsed out. I'll do this cup like several times. It's just a
little three ounce Dixie cup, and so I'll spray that out several times, so about, you know, pump
nine ounces through it, and then I consider that good, and then I hang it up on the edge of the
sink, and let it dry. So, that's how I do that. Now, we're going to let this work its magic.
You might be able to see some of the effects so far, like here in these areas, I'm getting some
dark green, and here it's starting to lighten up. Just turn a little green. This will eventually get
like a frosty, kind of a frosty lime green texture and color. Okay, so it's been 30 minutes since I
walked away, and you can see some of these areas, like right here, where we got a really intense
lime green color, and it kind of starts to turn a little yellow. So, we know this area,
that's about as ripe as it's going to get, and this point, you know, we can just rub it. It's
starting to flake. It's dry, and if I want, like this area right here, or right in here,
or even up in here, you know, I didn't get it. I could open up the Bronze Bee and reapply it.
See that streak? I don't like that. Anyway, I could go in there and touch this up if I wanted
to, but I think what I'm going to do is just go on to the next phase. I think this is enough
to break up the monotonous of the bronze, and I got something to work with now.
And like I said earlier, like my seam lines look pretty good, but if I was having a little trouble,
I would touch that up and just give that a quick mist, and right here also, where
I put it together, but it looks pretty good, so I'm not worried about it.
Okey-dokey. So at this point, I'm just going to rattle can my Crystal Clear.
I'm going to take it outside because I don't want my studio to reek.
Okay, so if you want a demonstration of what I'm going to do outside, this is it.
Swish, swish, swish, swish, swish, swish, swish, swish, swish, swish, swish, swish,
swish. You know, on and on I go. Don't put it on too heavy. Just do
maybe one or two coats on each side. Wait five, ten minutes.
Do it again wait 5-10 minutes
Do it again if you want three coats two should probably be enough. That's what I'm going to do
I'm not going to put it on tape. Just want to give you a heads up for those of you
That need a little hand-holding
This is dry now
So the crystal clear you can see how it covered up
A lot of that what it did was it darkened it
It's still there and
Some of these other points in here definitely still there
but what this does is changes the
tonal quality
it just breaks up the monotony of
the the single application of the bronze and it kind of darkens it in some places and leaves it brighter and others and
And this is all good. I mean the whole idea to make it a good patina
Are the layers layers and layers?
you know
If we're going to make a sophisticated piece, we can't be satisfied with the red and yellow arches
we have to go to
Shea on really
As deep as I want to go with this bolt. It's about three-quarter inch
This is all the deeper. I want to do it because then when I have my wood base
You know, it can't be longer than that
Or I'm gonna have to be using us a cutting wheel and kind of chop that off
so I determined that
3 quarters is
Optimal and
So I'm going to measure the base here of my spade my spade bit
From the gullet, let's say let's call it the gullet
And I'm gonna do that at the bottom there
Because that's where the bolt head is gonna sit
So I can either go to this line. That's a nice reference point
Or I can lay a piece of tape
across the backside and
Once that starts to hit and flap, I know I'm plenty deep
You see that piece hanging off
Once that starts to hit the bottom of the sculpture and knocking the dust everywhere
Put a right angle on the sides here, you know kind of
Carpenter's square like that and then lay a
45 degree angle on that and
Measure the two points and then you'll have your center
I've already done a center here
so I just held it there and turned it upside down and I have my
my center hole
And I just really need to get started here
So there's my hole
So this is the JB steel stick you can use the JB water weld
Which is what I used in the last video to put her arms together. But since I have some of this steel stick
I'm gonna go ahead and use that
What's cool about in the art applications? You can see there. It's a two-part
So you just cut the size that you need and there you go, but since I'm using the rest of it
You use your actual hands to do this. You're gonna get this gray stuff up and down your hands
It has such a lovely smell
And this stuff should set pretty quickly a lot faster than the other stuff
So my studio is quite cold this morning
very cold
So if I let this set like that that's gonna get as hard as a rock. So I'm gonna do
Make like a worm there
Make two worms the first one
This is the key here to keep this bolt from unspinning
We want to lock this inside so it doesn't spin when we tighten the nut
So I'm gonna try to make a section of that
Literally like so
I'm gonna set that
down in there
Make sure that that's
Pretty square
What's important to note here is that this has to be flush
So I'm gonna have my straight edge here, which is a fettling knife
And it's okay if you get some of this stuff in the threads at the bottom because your wood base is gonna occupy
some of these
Bottom threads, but you definitely want to make sure that you don't have any of this stuff in the threads up here
Make sure that that's pretty centered
Make sure it's
Standing where you want it to stand
I'm just gonna put the nut on there
to clean off the threads to make sure I
Can feel that grabbing some of that stuff
And it's just forcing it out of the way so it doesn't dry in the threads
It dries in the threads. We're in trouble
There we go
I'm finding that's not quite as perfect. So that's gonna harden
And that's gonna take a few minutes this here this can be my test
I can already tell this is getting really hard
so the longer you mix this the more you're gonna activate it, but you need to mix it to a certain point and
Boy this is like non-workable
So I don't want to mess with that bottom too much because at this point
I could wiggle play into this material and then the bolt heads not gonna hold so just once you get it set like it's
It's pretty much done. So I'm gonna let that sit for about 10 or 15 minutes and
Then I come back and put the black shoe polish on it work. We're on the home stretch here