I’ve decided to take on this project I considered years ago. However, I want to add a sculptural element to the top of my clock. I have been inspired by the Dream Lady sculpture at the Lincoln Park Zoo in Chicago. I will cover the basics of incorporating the sculpture into the clock design. I’m breaking this series into 4 videos. Part 1: concept/design and armature design. Part 2: clay and modeling. Part 3: casting the sculpture and cutting out the gears. Part 4: finish and assembly. Thanks for coming along!
BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3lYdoEk Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3ssh9Ey
SCULPTING MATERIALS & SUPPLIES CraftWrap - Plaster Cloth Gauze Bandage for Scenery, Crafts, Mask Art, Models, Molds, Keepsake Belly Cast - Each Roll 4 inch x 15 feet (Single Roll) https://amzn.to/3cwRvJg 1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins https://amzn.to/3fjUq9V Carriage Bolts ¼” x 20 SS, U-Turn, INC. (50 count) https://amzn.to/3lZtayK Autobody Panel & Trim Removal Tools (for demolding/separating your mother mold) https://amzn.to/3w9LXML Steel Hex Bolt, Grade 5, Zinc Plated Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/SAE J429, 1-1/4" Length, Fully Threaded, 1/4"-20 UNC Threads, Imported (Pack of 100) https://amzn.to/3ctbs3x 60 Pack 1/4" Wing Nuts Zinc Plated Fasteners Parts 1/4"-20 Inches Butterfly Nut https://amzn.to/3u31V9r AES Industries 294-1 Replacement 2-1/2" x 1-5/8" Curved Surform Blade (6 Blades) https://amzn.to/39q8efg Stanley Hand Tools 21-115 7-1/4 in. Surform Shaver https://amzn.to/3svUMhB JB Weld 8277 Waterweld https://amzn.to/3cwSZTQ Chavant NSP Medium – Sulfur FREE, 2lb Professional Clay (Green) https://amzn.to/31tVqA8 Alja-Safe Life Casting Alginate 3lbs (by Smooth-On) https://amzn.to/3wfZiDl Smooth-On Mold Max 30 (Trial Kit, pink color) https://amzn.to/3fkM41Z Smooth-On Rebound 25 2lbs (Trial Kit, orange color) https://amzn.to/3m0MuvI Smooth-On THI-VEX https://amzn.to/3ruTeTL Krylon Acrylic Spray Crystal Clear 11oz. https://amzn.to/3cvMDUU Premium Baltic Birch Plywood 6mm (1/4”) 12” x 24” by Wood-Ever (I give Woodever two thumbs up for quality birch ply) https://amzn.to/39q9XS2 Titebond Original Wood Glue, 16 oz. https://amzn.to/3sx2E2o Dental Tools / Waxing Modelling Tools https://amzn.to/3sJ4ai9 Sandpaper Variety Pack 24pcs, 12 grits: 120 – 3,000 grit https://amzn.to/3djpa8F
12V 30W Permanent Magnet DC Motor (3,000rpm) (for roto-caster) & 12V – 40W 10A (PWM) DC Motor Speed Controller circuit board (combo) https://amzn.to/3dcSBZY Beveled Gears (for roto-caster) https://amzn.to/3w4dZZU 10 Tooth Clutch Gear Drive Sprocket (for roto-caster) https://amzn.to/3sygXUf Bike Chain (for roto-caster) https://amzn.to/3dkwxg6 Music is used with permission through filmora 9 Wondershare editing software. Music by: Low Tree – Shall Region
All right, welcome back. So for this next project,
it's about making a clock. I've been thinking about this for the last two years.
There's a fella, I think he's an engineer of sorts, named Clayton Boyer. Clayton Boyer,
but you can go to lisaboyer.com, I believe. And he has all these clock designs
and simplicity is the one that I really like. Just aesthetically, I think it's really going to work.
But anyway, I wanted to take it a step further. And I've been going back and forth with the
different ideas about what to do. He has a double weighted clock. So I believe that
this heavier one of the two pulls it down throughout the day. And then by the end of
the day, it's clear up here. So you would stop the pendulum and then pull that weight back down.
And, you know, so on and so on. So every day, you would start the clock. But these
sculptures could ultimately be cast in bronze, it'd be pretty pricey, especially on something
that's a clock that's to be made out of wood. So I'd want to do something like gold leaf it,
you know, to increase the preciousness of the overall piece. But I think for
all intents and purposes here, I might keep the materials just on the cost effective side,
not to have a bronze sitting on top of plywood. But this here, the characters will sit up here.
So what I did was I just folded it and drew. There's a piece in Chicago that I really like.
Let me try to line this up here with this escape wheel and escape pinion. So
there's a piece in Chicago that has a fairy above these two children that are sleeping.
And it's life size, but I've always been taken by that piece. And I thought, you know,
it might be nice to have these two children who are sleeping on the back side of it while the
clock I just picture a room that's completely quiet with the pendulum. And, you know, it's
just a nice quiet time to rest, relax. And who doesn't like the sound of sleeping children?
I do. I love it. So anyway, that's just a kind of grayed out version of where they would be.
And I'm still trying to figure out how to get his legs because his legs hang over the side
of the plinth and the actual piece. Of course, this is going to be a rendition of me
recreating it. But his legs, you know, I have the moving parts back here,
so I have to figure out how to handle this. So I built a little model here
using some of the pattern pieces. But this would be the shelf with the gear sticking up because
the pivot point is actually taller than the board. It's not coming out of the middle of the board.
So I this would be the middle here of the gears. So that would be the wheel. And
this is my box. So the gears are going to come out about this high
back here. But I can put a box over that so it sits above it and then they can sit on it. I
wanted his legs to dangle over it. But then with that being said, it has to be behind to this point
because this is going to be the clock face with the minute hands and such. So if his legs really
stick out past that, they would get, you know, interfere with the movement of the hand. So
it's taking a little bit of thought. I've only been thinking about it for two years.
I'll show some of the design ideas that I have that I've come up with. A wise man once told me
to come up with 10 designs and somewhere in the 10 designs you'll find one better than the first
and maybe the second better than the first few that will ultimately give you better satisfaction.
And when I was 18, I actually did that on a painting contest and I got a second in my
category in the state. So that was pretty cool. Anyway, I'm going to do it again here.
And I think this idea with the two children is going to be the best design so far. But anyway,
I will construct a box and you'll probably be seeing more of this after I get the armatures
put on top and start throwing clay on there and sculpting away. Okay, so the figures that are
going to go on top of my base are going to be a boy and a girl. And I've chosen to make the girl
the smaller stature of the two armatures. These are armatures that I've used in other sculptures.
I did not invent this style myself. This is something I learned from a sculptor named John
Brown. You could go to Nomen Workshop and that starts with a G. And his stuff was available there
when I bought it. Let me move these to the side. So again, here's my base.
And all I did was took this pink foam board. You can get this at a hardware store like
Home Depot or something of that nature. And I took a compass and lined it up.
Let's see here, this is the back side. So I took the height here and I knew that this was like
three inches high. So I just did a radius of one and a half inches and swung it with some despair
and then made my tunnel. So because the gears are going to come out through here and stick
into this post. So that'll go on like such. Then that should give me some right there with the back.
Line that up properly. And then this will get covered with clay. So that'll look pretty good.
And then that should give me enough clearance there for his leg to swing over or something
of that. With his foot hanging here, as in the drawing, his leg will come over and then hang down.
And then the clock face is right here. So I should have enough room.
Looks pretty good. I like it. And it'll be pretty cool because this will have
cutaway. So you'll be able to see inside of the gears in the back. And if I play my hand right,
you should be able to see the gears inside of the clock and what's going on underneath these two
taking a cat nap. Okay, so I have my armatures put together the way that I want on the base piece.
I could have swore I printed this out and did some sketches a long time ago.
So I found it. And this is I don't know. Yeah, this is a photo I took when I was there years ago.
It looked like back in 07. So this is May of 2007. So we're in May now, it's 13 years ago.
And anyway, I printed it more recently, a lot more recently. And then I did these sketches
to try to break up the characters into their basic elements so I could understand what the
doing really. I just have this held down with little pens. So I got these set up. But let me
show you. So what I decided to do was leave his foot free float above these gears right down in
here. So this piece, I think it might be called the dial train, or something like that once it's
assembled. But I want to make it look like his foot is resting on that. It'll be moving so slowly
that it's not going to look like his foot is you know, going bump, bump, bump. It'll just look like
he's kind of resting it there. And this foot is actually behind the gear on the base. So that's
nice. So there we go. So as far as the anatomy, I'm just going to have to make it work. She's
contorted in such a way. I mean, it's a beautiful form. But I don't know how realistic it actually
is. Let's see if I can set this up. Take that off there for a second.
I'm kind of looking at it from this angle. Anyway, next step is to start pushing some clay around
and seeing how it's going to look. This is John Burns with John Burns Fine Art. If you like this
video, please hit that like button and make sure you hit the subscribe button with that bell
notification to make sure that you are in the loop for all future videos that I produce here
on my channel. You guys are great. Have a great day. Take care. That's it for now.