Creating light weight mother molds involve a lot of work, patience and creative thinking. By combining hydrostone and fiberglass mat we can create very light weight mother molds for sculpture and silicone molds. Not every mother mold can simply fall into two pieces. Because of the complex nature of some sculptures, a little more ingenuity and engineering is required. In this video I share my methods for creating a complex mold and advanced techniques in an easy-to-understand tutorial. Please, be patient with yourself and your materials. The sculpting process is a joy. Treat it that way. Best of luck. FREE Education here all day! If you would like to support my mission in teaching sculpture, please consider making a donation or contribution to PayPal.com/me/JonBurnsFineArt/ 10% immediately goes back to charity in our local community. Thank you for your support. SOCIAL MEDIA Follow me for more fun and see what goes on behind the scenes in my studio. I can also be found on: http://www.Instagram.com/jonburnsfineart/ http://www.Facebook.com/jonburnsfineart/ http://www.LinkedIn.com/in/jonathan-burns-08a05b35/ CLAYTON BOYER CLOCK DESIGNS: (non-Amazon) http://lisaboyer.com/
I am an affiliate with Amazon. Please follow the links below to purchase these products through Amazon.com. You will be re-directed to their site. This way they will know I sent you. Thank you. BOOKS - technical Eduard Lanteri – Modelling and Sculpting the Human Form https://amzn.to/34jQlwy Stephen Rogers Peck – Atlas of Human Anatomy for the Artist https://amzn.to/2HiFpa5 John H. Vanderpoel – The Human Figure https://amzn.to/35ok5rE George B. Bridgman – Bridgman’s Life Drawing https://amzn.to/34jQSi2
BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3okM0Bo Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3mfW5xx
I'm going to show how to use water-based clay to create a shim to apply your mother mold.
I thought I'd just walk you through all these steps. Yeah? Yeah. Okay, before we can start to
draw our parting line, we want to take our exacto blade. I'm not sure if this is... yeah,
it's a little sharp. Anyway, here's what we're going to do. We're going to...
Let's just cut off the minimum and see how we do. So I'm just going to the edge here.
If you can leave a slight angle when you cut it, that'll... like this, not like that.
That'll help with the securing the silicone inside of the mother mold.
You'll know what I mean later. Okay, so I just did the edge and then that way when I peel,
just a clean break. All right. Okay, so now we can see what we're dealing with around the edges here.
That looks pretty good. Now, the only other thing that I'm really concerned about
are going to be these little edges here that are kind of sticking out.
So I'm just going to trim those off just so they're not quite... there'll be a problem later.
But we've got a nice kind of beveled edge here. So when that goes, when the mother mold holds it,
that'll keep that flat down instead of letting it have a tendency to kind of move out.
So that still looks pretty good. So that one is going to be ready for the next step.
I like to do this also because it allows the plaster mother mold to have a flat surface.
So if you ever put a lid on the bottom, you know, once the board is off, of course,
you get something really nice and flush instead of this rubber running out to the edge and a
mother mold on top of it. You know, you can drill through and then you're going to have
some really weak points. At least now you can drill through, have something really substantial.
Okay, so next step is going to be to get the lines on here. So stay tuned. Actually, actually,
actually, I mean, this looks pretty good, but I got to free up this loose stuff on the edge here.
And I'd like to just tighten this up a little bit too. It looks a little loose.
So I just pick a spot. So I didn't lose too much. Try to keep it really close to the edge.
As you can see, that leaves me with a really nice flange. This one's going to be a little
trickier because of the difference. Okay, so for over the top, we're going to try to get this
sucker to come off like so. Okay, but where do we draw the line in the middle? So now with that
side having that, I want to try to keep the line over on this side. And we're going to do the same
but on the interior really. Okay, down in here we can see. So I don't know if you can see that in
there. I know that looks tricky, but that's going to work. So then that's how our two halves are
going to come across. So we're happy. That's good stuff right there. Okay, so I didn't show how I
did this, but I'll explain what I did. I take my time on trying to figure out how to part up a
mold like this, even if it takes me, you know, 45 minutes or an hour. Sometimes it's a little more
intuitive and you don't need to spend as much time. But what I wanted to do was really consider
these arms here. Like with a two-part mold, this would be extremely difficult. One,
come off this way, but then we have these hooks here and here. So that would never come off.
So I'd have to like twist the pieces. I managed it on the Andromeda piece, but
on this one, I wanted to take the opportunity to not only
make the mold easier, but to show how to do a three-piece, even though it takes more time. So
I decided on starting with this arm because this looks like the broadest section to me.
I made it, I mean, generally when you're applying your lines, you want to, let's see where are we,
we want to put it so that you just can't see that where the tip would go over the edge and where it
would come over the front, you know, that sweet spot and you don't move it. And then you just
kind of move your body over a little more and then try it again. And then hopefully you get
two equal halves. That's one way or to drag your straight edge. So you would draw a line and a line
on the bottom, turn that perpendicular and drag that. And where that touches is your high point.
So you can dot, dot, dot, dot, dot, dot, dot, dot, dot, dot, and then connect the dots, right?
And then you would again, line up your two points and drag it. Well, that was kind of
the general approach for this one side. I, I realized this, there's no hooks. This could come
off very easily. So I wanted to try to get off as much as I could in one pole without difficulty.
So I brought these lines forward a little more. That's why I took the time to explain that.
So I just rolled this line just in view an eighth of an inch on each side or so.
Now, if I just try to take off the other side, like, so I'm going to have hooks because I brought
it over a little more. See what I'm saying? Okay. And then I took this side and I could have drawn
the line here to pull this off, but then I start running the risk of having it too far around.
But being a three piece, I don't need to do that. So I got a line here, a line here,
and just draw it right on the front. I mean, right dead center of these two lines and where
this line draws over. See if I can show that really quick here without losing my piece.
I don't know if that's visible, but where this line connects over the top,
I took this and just teed, teed it in there. So that's how these three pieces are going to
come together. And, uh, again, I did that at the bottom where the two parting lines are,
where I brought the line down. I just, you know, envisioned the circle,
brought it straight through, have a circle, brought it straight through. I didn't go
cattywampus and pull it off to the side. I just tried to keep it circle straight out,
straight out. And so when I came to this one and I can see where these are straight out,
then I did another one right here in the middle. So I took my middle and then I just drew a line
down. It's that easy. I'm going to show how to use water-based clay to create a shim
to apply your mother mold. Right. So this is where the rubber meets the road.
So the mother molding process, we have our same lines here, right? That we've talked about.
This is just ordinary water-based clay. So I took one of my armature boards and I took two
strips of wood. I drilled the holes, pre-drilled them because these will split if you try to run
a screw straight through them. And then I countersunk it. And the countersinking is
really important because you see how that glides right over?
If the head of the screw sticks up,
your wire, when you drag the wire across it, will catch. So you could glue these strips of
wood down. That's fine. I know I want my slabs only be a half inch, so I used half inch boards
or pieces of wood rather. So let me show you how to do this. You don't need to hit your clay.
Unless it's disobedient. You just take your wire and when the time comes,
I just cut it and then I can apply that to my sculpture. And since it's so wet, it just sticks.
I mean, a little bit of pressure here and there, but you see that's just hanging on.
So that creates a very ideal shim of sorts. I'm just going to lay that down.
And see, this saves you a lot of time of like pinching clay,
like rolling coils and then pinching it. And this actually reduces a lot of fatigue
No one really wants to know how it's made. It's messy. So this is handmade work here.
And I'm going to, so this one's ready to go. We can start throwing plaster up on that.
Some fiberglass. So I'm just going to set this one to the side for now.
So let's get the biggest one out of the way first. So that would be number two.
Just taking the distance between these two points to these two points.
I'm just dragging a straight line between. So I'll do this to that.
So
so
So this is pretty much finished. I like this lighting because you can see the nuances.
So I just used this tool when I was done and just went along and used this point to get in here.
And the idea really is to make sure that edge is sealed so the plaster does not go underneath it.
And again, I was trying to keep it
perpendicular to the edge. So if the curve is like, you know, I want to stick it straight
out, not like this, not like that. So I tried to pay attention for that. And on this backside,
here's going to be our next parting line, but we're not going to worry about that right now.
These are the braces for this wall. And they're not that strong, but it's enough
to get this wall to hold its shape because you're not really going to be, you know, pushing the
plaster, you know, it's going to be on it. And the plaster bandages and the fiberglass mat are
going to go on top of this very gently. And as the layers build up, you'll see that it becomes a nice
hard wall. At that point, we're going to strip this clay off. Hydrostone makes an excellent
mother mold with fiberglass mat and with the problem with trying to get hydrostone on a
vertical surface as it runs. Plaster bandages, however, make a great base coat to get something
for the hydrostone to stick to. So in the description,
you're going to see plaster bandages listed below. You can have these sent to your door,
as I've done. You know, you kind of get them in a package like so.
And I'm cutting these into strips. So, you know, um,
you know, one, two, and then the other one, one, two. So I've got four pieces cut for a side.
And I've got these cut for this. There's about 15 pieces here. I figure that should do it.
So I also want to say that you just take these and dip them in water.
And the one thing that you don't want to do is pour this down the drain when you're done.
You would be best to set this in the corner and leave it alone.
It'll settle out. And if you want, you can siphon the water off the top or kind of
pour it off, but do not dump that bottom part in the drain. It will get as hard as a rock.
Word to the wise. And I greased up the board here with Vaseline because the plaster will stick to
that. The plaster will stick to that. So I greased up all that stuff. Okay.
And rubbing this will ensure that the plaster works its way through the cloth.
Okay. So at this point, I have plaster bandages covering the slippery areas where the Hydrostone
tends to want to fall. So this silicone is covered. There's some spots on the bottom,
but that's okay because the Hydrostone tends to pool. And it doesn't tend to run so much on the
although it does, but there's enough on here that I think I'm going to be okay.
I'm not going to be completely ridiculous about this. So at this point, this is
starting to set. I'm going to switch to the Hydrostone now, and we're going to apply that
next. And we only need to do like two layers of that. This bowl, it's just a simple bowl.
It's important to take a greased up rag or something. And then that way, when your plaster
sets, it releases a lot easier when you're done.
All right. So here we are. We've got this one.
And it came over the edge and that's fine. We're going to trim that up.
I'm going to trust that this is thick enough. If it isn't, we can correct it on this side.
Now, this clay is still soft. Some of this stuff here, this stuff always gets messy.
It's just the name of the game. Honestly, if it's still wet, you can re-bag it.
Re-wedge the clay. Google that term if you don't know what it is.
And use it again. The same stuff. So this is just coming off. And maybe you can see now
where I was going with this. And let me give you a tip here. So you see how when I lifted
that, that came right off? When you start digging to try to scoop that off, it will just smear
and not be so nice when you take it off. So if you can kind of get a sharp tool in there and
lift it up, it makes cleanup a snap. I mean, there you go. So where are we at here? Well,
if you have any experience with gauging by pinching, this is thin. I'm not that crazy
about how thin that is, but I'll live. So let me show you what's up. This is just Vaseline.
Petroleum jelly. Vaseline is the brand name. Petroleum jelly. Put it on here.
This will protect the mold half from the next layer of plaster hydrostone. And wherever you
don't get this stuff, the plaster is going to stick. And then you may have things to consider.
Put it that way. There was a little pocket up in there. We're going to deal with it.
Okay, so at this point, I just get something on my finger like that and then just trace it
along the edge. And that'll kind of fill in that recess because there's a slight little recess.
And this just makes the mold a little cleaner. When you take it apart,
you'll see what I mean. It'll be a nice smooth curve. So that's ready to go for the next one.
And I just want to warn you, these, when they dry, are going to be as sharp as a knife.
They have the hydrostone and the fiberglass is essentially glass. It's going to be so strong
that if you aren't paying attention and ask me how I know, you'll go right past it and slice
your finger open. So just, you know, be aware. Another advantage of trying to keep these walls
as perpendicular to the form as possible. As you can see now, just how much easier it's going to
be to put that on. If that wall, for convenience sake, leaned this way when you were doing this
side, now you've got a really, you would have a really heavy arch that way and it's just more
rather, and enough hydrostone to build it up on top of the plaster bandages, which are paper thin.
So with this hole, the way to deal with that, if you just throw plaster on there,
you know, that could pull those two pieces together. So I knock off the loose pieces here
and then what I'm going to do is just fill that up with either clay or vaseline. So I could pack
clay in there and just make that level, deal with that void. So now this will just sit flush on top.
So that's that. We're on the home stretch. It's very important. Just want to take a minute here
to tell you, you have to remember to grease your flanges. We're getting so close to the end that
this will be a major problem if we forget. Now we want to remember.
So we'll do that next video and we'll get it opened up, set the mother mold aside.
We'll slice off the silicone, take a look at our working model. We'll put the silicone back
together and put this mold back together and it'll be ready for a pour. In fact, I think the board
that this is on is going to make a nice base for the bottom. Right. There we go. Thanks for coming
along. I hope this video did you some good. I hope you learned a lot. I hope you enjoyed it,
found it somewhat entertaining. Hope you enjoy the music. So please like and subscribe. Please
share this with a friend and please check out the description down below. See if there's anything that
you can use in your studio. Check out these other fine videos. Really appreciate you guys.
Thanks for coming along. I've got my core group. Thank you so much. Appreciate you.