Drapery and folds add depth and character to classical figure sculpture. The lost art of draping the figure has seven key folds that every figure sculptor should know. Understanding drapery and folds are just as important as understanding the anatomy of the figure. My hope is that this content enriches your sculpting experience. It is my goal to bring you content that is not widely available so please subscribe to make sure you get all the tips and techniques. Thanks for watching. SOCIAL MEDIA Follow me for more fun and see what goes on behind the scenes in my studio. I can also be found on: http://www.Instagram.com/jonburnsfineart/ http://www.Facebook.com/jonburnsfineart/ BOOKS - technical Edouard Lanteri – Modelling and Sculpting the Human Form https://amzn.to/2PxwftU Stephen Rogers Peck – Atlas of Human Anatomy for the Artist https://amzn.to/3swUwyS John H. Vanderpoel – The Human Figure https://amzn.to/2O7k46Q George B. Bridgman – Bridgman’s Life Drawing https://amzn.to/2O43XH6 BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3lYdoEk Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3ssh9Ey SCULPTING MATERIALS & SUPPLIES CraftWrap - Plaster Cloth Gauze Bandage for Scenery, Crafts, Mask Art, Models, Molds, Keepsake Belly Cast - Each Roll 4 inch x 15 feet (Single Roll) https://amzn.to/3cwRvJg 1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins https://amzn.to/3fjUq9V Carriage Bolts ¼” x 20 SS, U-Turn, INC. (50 count) https://amzn.to/3lZtayK Autobody Panel & Trim Removal Tools (for demolding/separating your mother mold) https://amzn.to/3w9LXML Steel Hex Bolt, Grade 5, Zinc Plated Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/SAE J429, 1-1/4" Length, Fully Threaded, 1/4"-20 UNC Threads, Imported (Pack of 100) https://amzn.to/3ctbs3x 60 Pack 1/4" Wing Nuts Zinc Plated Fasteners Parts 1/4"-20 Inches Butterfly Nut https://amzn.to/3u31V9r AES Industries 294-1 Replacement 2-1/2" x 1-5/8" Curved Surform Blade (6 Blades) https://amzn.to/39q8efg Stanley Hand Tools 21-115 7-1/4 in. Surform Shaver https://amzn.to/3svUMhB JB Weld 8277 Waterweld https://amzn.to/3cwSZTQ Chavant NSP Medium – Sulfur FREE, 2lb Professional Clay (Green) https://amzn.to/31tVqA8 Alja-Safe Life Casting Alginate 3lbs (by Smooth-On) https://amzn.to/3wfZiDl Smooth-On Mold Max 30 (Trial Kit, pink color) https://amzn.to/3fkM41Z Smooth-On Rebound 25 2lbs (Trial Kit, orange color) https://amzn.to/3m0MuvI Smooth-On THI-VEX https://amzn.to/3ruTeTL Krylon Acrylic Spray Crystal Clear 11oz. https://amzn.to/3cvMDUU Premium Baltic Birch Plywood 6mm (1/4”) 12” x 24” by Wood-Ever (I give Woodever two thumbs up for quality birch ply) https://amzn.to/39q9XS2 Titebond Original Wood Glue, 16 oz. https://amzn.to/3sx2E2o Dental Tools / Waxing Modelling Tools https://amzn.to/3sJ4ai9 Sandpaper Variety Pack 24pcs, 12 grits: 120 – 3,000 grit https://amzn.to/3djpa8F STUDIO / HEAVY EQUIPMENT DREMEL Drill (with ROTARY flex shaft & assortment of wheels) a very good deal https://amzn.to/31rxo91 Drill Press, WEN 4212 10” Variable Speed https://amzn.to/3ufzoOf Scroll Saw, WEN 3921 16” 2-direction Variable Speed https://amzn.to/39nHGLM WEN 3960 2.8-Amp 9-Inch Benchtop Band Saw https://amzn.to/3dcJEzG WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base https://amzn.to/2PD2xDG Makita RT0701CX7 1-1/4 HP Compact Router Kit https://amzn.to/2PGRGZK Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set https://amzn.to/39kwsb2 Titanium Drill Bit Set, DEWALT 21pc (DW1342) https://amzn.to/3lYROjb Clamp-On Table Lamp Gooseneck Design (black) https://amzn.to/3rzWM78 Tabletop Lamp Gooseneck Design (silver) https://amzn.to/2O0lQ9E Etekcity 0.1 g Food Kitchen Gram Scale with Bowl, Accurate Measuring Tools in Ounces and Pounds 11lb, Silver Stainless Steel https://amzn.to/3lY2TkF
I just want to take some time to explain here some of the basics
before we get started. Or maybe this is an interlude. It's a little bit of b-roll,
so I'm not really sure where I'm going to put this. So, according to George Bridgman,
we will refer to this little book as the Gospel of Drapery, I suppose.
So he talks about seven different kinds of folds, and it's pretty useful if you're just getting
your feet wet with folds. He has diaper, zigzag, pipe, half lock, inert, drop, or spiral. And he
claims that we can find all these patterns on Nike of Samothrace. So, winged victory.
But he goes into some detail, and I just want to give a little demo, if I can,
to show what's going on here. So a straw kind of illustrates this, that when we are dealing with
drapery, and it bows like this. I hope that this is caught on camera. Let's bend it in the middle.
You should be able to see where this does not bulge out the back. This just kind of continues
over. But it gets super thin in the eye there of the fold. And then what we can see is this kind
of swelling back out to the main form. But when we twist it this way, we can see how it pushed out
on the sides, or on the top and bottom. So this is what happens in drapery. So it's kind of whole,
and then some force is placed on it in a particular place, because of gravity or an
object or change of direction, and we create the eye of the fold. And this ends up having a radiating
out form from this point on the outside, this kind of tangent point. So if we were to draw this,
and I'll just put a little curve here, like so.
This comes up, and now this is headed up this way, and then back down. But mind you, it's super thin
because it moved up and down. So it's looking more like this. Yeah, so that comes down like so,
and this is going to be the part that is the deepest, let's say. And so that's kind of the
effect. And if you were to bend that straw again, say take it this way, not quite as steep, we could
kind of expect to see something happening like that. And you'll see this type of pattern
in the drapery. But the idea is that when we move into, and this is the eye,
all right, eye, eye. As we move into these patterns, which I'm about to show you,
you'll have a pretty good understanding. Let's see here. So this is just a wet paper towel.
It's just a wet paper towel here. This is just to give us a basic idea. So your most
common form of drapery is going to be what they call a drop. So this is basically a drop,
a drop fold. This is where you see this kind of hanging pattern originating from one point.
This is very, very common. If we say pin it in two places and begin to let it sag like so,
this is what we call a diaper drape, a diaper. And let's see here.
If we say like chain, let me just grab it right here for example. Well you know what,
here's what I'm going to do. I'm grabbing it from opposite corners. But let's say
this here. They could call this like an abrupt change of direction. This would be what they
call a half lock, a half lock fold. Very interesting in my opinion. So first off,
that's inert. That's when the drapery lands on the ground. But if we were to say,
put the Dixie cup down, here we're starting to see zigzag folds where it starts to just come down
and maybe repeat. So these are characteristic zigzag folds. Now if we say like we have a
cylinder, like a sleeve, and we begin to drop it like so. So that's what you're going to see on a
sleeve and that's what we call a spiral fold. I'll just try to pick it up really quick so you
can kind of see. See it bulges out and there's indentations. It's kind of like an X, but then
it has a bit of a repeating pattern. You'll see it when you study your model. So let's see,
we talked about diaper, zigzag, pipe, half lock, inert, spiral, and we talked about drop.
Pipe, pipe is going to be more like a shower curtain. Let's just see if I can weave this
between my fingers. So pipe drape is going to look like a curtain, like on a stage.
You get the idea where it starts to just hang straight down. So pipe drape,
shower curtains, sometimes the ones that you know have that waviness creates all the pipes.
And it differs from a drop even though they're similar because this one is from one fixed point
creating this type of pipe. And usually it has more personality too because you start to see
these types of folds. Okay, so let's go ahead and get started on the little drapery demo. Okay,
here we go. So what I'm trying to do here is create the illusion of the drapery.
What I've done is just taken three simple sections of the paper towel here.
I've soaked it in water and I wring it out. These are still wet from being cast in plaster.
So if it's not you're either going to want to seal this somehow or soak it in a bucket of water
before you apply this wet because the plaster will immediately begin to absorb the water
out of your drapery here. So I'll just set that here for a second.
I do have a spritzer bottle and this is just to help it stay wet so that it doesn't dry out too
much. So on the back here where I pulled these two pieces together, I've used tape to hold that
together. And let's hope that stays long enough until I can get the next piece down. I put a tape
underneath here but she's a little too damp because I wanted a little bit of this tautness
right there. And the hydrostone isn't going to take the water so much. I mean it's a little
resistant. But anyway with this being wet it'll stick to the figure a little better.
So you have to determine ahead of time what your major course of action is going to be.
I did a quick sketch of the form here and I realized that I have this kind of S movement
since this is the the angle the main angle here so that the S will kind of flow through
and through the hip and come out. I didn't want to do a W and bring it back through.
If she hadn't started out here maybe I would have to create that S but I'm satisfied like
you know carrying out. So on some of these folds here because we want to make sure since we're
working in the round that this looks good from a lot of angles. I've just used a wooden knife
and kind of tucked edges in a little better and made sure that this is really how I want it.
Because I want to accentuate the figure with the drapery. We don't want to hide the figure.
You never want to hide the figure. Don't even use it to cover up flaws. Just get the flaw right.
What I'm really trying to do here if you use Alphonse Mucha and the style of Alphonse Mucha
is create this kind of like busyness but you know give it moments of rest too in the material.
And this I may want to leave hang on the bottom hang off like that. You can see where I'd
tucked it underneath the form. I'm not really thrilled about that but I think maybe I'll be
okay. So that's her rib cage there and while I'm doing this I can also kind of pull this. This is
the point of tension here on the hip. You can see the folds are coming in this way. This is the idea
they're all kind of meeting at this point. I don't really want to create a conflicting fold.
I mean it's okay look at that it's already drying out. So this will give you a better
idea of what I'm trying to do here. I'm going to get the second cloth lined up and get that ready
to go. Now by tucking that in I want to make sure that there's a reason for that. I don't necessarily
want it to be tucked in there unless I can somehow justify that fold. I'll go ahead and leave it for
now. I'm pretty satisfied I'm thinking that this is going to be the direction that this goes. See
when I brought that under that kind of created another fold and I like how that landed because
it closes off that leg. I could take advantage of that. So look here's the point we drape this
plaster casting and I'm going to put clay I'm going to copy this in clay on top of her. So
this is going to be my sculpture. Of course I'll plug that hole up and so forth. I glued her down
to this board so it doesn't teeter as much. With the clay on here I can put clay arms. I'm going
to attach my Mercedes star on here and this will in essence be the prototype for casting. I'll
probably remove the arms and then cast this plaster figure with the clay on it as my new
sculpture. So then every cast after that is going to you know obviously be pure plaster.
So I'm turning Andromeda into Mercedes and this is the approach of how to do this.
Okay I'm just going to keep my wet drapery there inside of a Dixie cup. I do like my idea of the
wood glue on the form. That's going to keep that nice and taut. I may not ever use this
figure for anything else but this so this is okay. I mean this is kind of a throwaway piece
after I'm done. It's kind of like a hospital gown and we'll turn her around to see how she's doing.
See what I'm doing? I'm trying to roll this fabric so that it looks more like a spiral.
It's a little more of an interesting form. I may cover it up. I may not but if it's left out I
don't want to see it that way. So I don't want to tear that. See how that's pulling
taut like that? It takes this bagginess out and kind of lifts it. Adds a little more stretch and
dynamic right here. That's what I want. I'm going to pull that taut and it shows off this
hip a little more. That's what I'm going for. What I'm trying to do here is create a little
more dynamic with a pocket. I have these folds going on. For the time being I think I want to
leave her back exposed so I'm trying not to wrap that too tightly. Okay that's a good fold.
Okay so that's that. I think what I'm going to do in order to keep this bottom piece from moving
just put that like so. See if I can leave my name and date at the bottom a little bit.
That's looking pretty good for a first layer I think. I'm not really sure what I want to do with
quite yet. I'm not quite sure. I mean I want her to be tasteful that's for sure.
I'm just playing right now. This is part of the creative process. So when I pull this around I'm
trying to keep the corners and such that way. But you see how these folds are all piling up here?
If I kind of like I'm folding a towel I can create a little more interest in the folds that way.
But don't let the pieces stick together before you do that. Kind of leave them loose in the middle.
Okay so that looks fantastic. You can see here how that's tucked up. It's no longer hanging down.
Maybe just for fun.
Stop, stop, stop, stop, stop, stop, stop, stop, stop, stop, stop, stop, stop, stop, stop, stop.
I'm just gonna put a little glue on there. Let's see what happens.
So this is where our real artistic license comes in. In my opinion. So the next step is to make
this appear on here. All right, thanks guys.