In this in-depth video I discuss prepping the sculpture for how to make a complex mold through adding a backboard, considering final fit to the clock project and applying a Krylon crystal clear finish. This video covers mixing & applying the hydrostone, fiber glass precautions, wait times, shimming and tips for a more successful mold. This video is 2 of 2 for the mold making process. The silicone application is covered in part 1 of 2. See link below.
I’ve decided to take on this project I considered years ago. However, I want to add a sculptural element to the top of my clock. I have been inspired by the Dream Lady sculpture at the Lincoln Park Zoo in Chicago. I will cover the basics of incorporating the sculpture into the clock design, Simplicity, by Clayton Boyer. I’m breaking this series into 4 videos. Part 1: concept/design and armature design. Part 2: clay and modeling. Part 3: casting the sculpture and cutting out the gears. Part 4: finish and assembly. Thanks for coming along! BE SURE TO CHECK OUT THESE VIDEOS TOO!! HOW TO MAKE A COMPLEX MOLD PT.1 of 2 Silicone and Hydrostone / Plaster, Handmade Mould https://youtu.be/wj3DJEpcbcI HOW TO MAKE A SCULPTURAL CLOCK series (pt.3) https://youtu.be/czVsP9TZF0A Follow me on Instagram @jonburnsfineart for more fun in my studio. CLAYTON BOYER CLOCK DESIGNS: (non-Amazon) http://lisaboyer.com/
BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3lYdoEk Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3ssh9Ey
SCULPTING MATERIALS & SUPPLIES CraftWrap - Plaster Cloth Gauze Bandage for Scenery, Crafts, Mask Art, Models, Molds, Keepsake Belly Cast - Each Roll 4 inch x 15 feet (Single Roll) https://amzn.to/3cwRvJg 1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins https://amzn.to/3fjUq9V Carriage Bolts ¼” x 20 SS, U-Turn, INC. (50 count) https://amzn.to/3lZtayK Autobody Panel & Trim Removal Tools (for demolding/separating your mother mold) https://amzn.to/3w9LXML Steel Hex Bolt, Grade 5, Zinc Plated Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/SAE J429, 1-1/4" Length, Fully Threaded, 1/4"-20 UNC Threads, Imported (Pack of 100) https://amzn.to/3ctbs3x 60 Pack 1/4" Wing Nuts Zinc Plated Fasteners Parts 1/4"-20 Inches Butterfly Nut https://amzn.to/3u31V9r AES Industries 294-1 Replacement 2-1/2" x 1-5/8" Curved Surform Blade (6 Blades) https://amzn.to/39q8efg Stanley Hand Tools 21-115 7-1/4 in. Surform Shaver https://amzn.to/3svUMhB JB Weld 8277 Waterweld https://amzn.to/3cwSZTQ Chavant NSP Medium – Sulfur FREE, 2lb Professional Clay (Green) https://amzn.to/31tVqA8 Alja-Safe Life Casting Alginate 3lbs (by Smooth-On) https://amzn.to/3wfZiDl Smooth-On Mold Max 30 (Trial Kit, pink color) https://amzn.to/3fkM41Z Smooth-On Rebound 25 2lbs (Trial Kit, orange color) https://amzn.to/3m0MuvI Smooth-On THI-VEX https://amzn.to/3ruTeTL Krylon Acrylic Spray Crystal Clear 11oz. https://amzn.to/3cvMDUU Premium Baltic Birch Plywood 6mm (1/4”) 12” x 24” by Wood-Ever (I give Woodever two thumbs up for quality birch ply) https://amzn.to/39q9XS2 Titebond Original Wood Glue, 16 oz. https://amzn.to/3sx2E2o Dental Tools / Waxing Modelling Tools https://amzn.to/3sJ4ai9 Sandpaper Variety Pack 24pcs, 12 grits: 120 – 3,000 grit https://amzn.to/3djpa8F
But this is how the finished product will look on top of the clock
Inside here his foot is behind the big wheel and this hammer
Still is able to raise up high enough on the snail
So there you have it this molding video will be broken into two parts one's gonna be the silicone jacket
and the second is gonna be the
mother mold, but then in the subsequent video
It should be the fourth part of this long series of this clock sculpture
Will be part four. It'll be this completed
On top of this clock installed in my home. So this is where we're at
What a joy
And I hope you guys enjoyed it as much as I did. This is a preview
Stick around hit subscribe. So, you know, please hit the like button and subscribe and select all notifications
Thanks guys, and be sure to check out the product description below for the materials that went into making this clock. Okay, take care
Back to work
So this is prep for the next wall here
What I want to point out is that I filled in this cavity with some of the clay. I use an oil-based clay. That's acceptable
water-based clay is great if it's still wet like fresh out of the bag because it tends to
Adhere to the silicone a little better, but if it dries it'll shrink and of course fall right off
But anyway, I went ahead and plug this hole
I feel like that structure is going to be strong enough to support itself without needing a plug inside and of course, that's easily
Rectified if that doesn't work out
I built a wall here and brought it down because I didn't want to try and do cards
The business cards the way that I did around here
And that led me to another line of thinking so this
Section is going to pull off like this. This is obviously the perimeter. I
Looked at it from the angle. I wanted to pull it off and then just took this and dotted it
And then double-checked it because you can hold it perpendicular and then drag it a line like this and see exactly where that
High Ridge is going to fall
After I decided that line was good I
Considered with this third section come off on its own
You know once this is off will that come off and I'm pretty happy with it
So I just filled in that area just to make sure that it wasn't going too far under
and if I have to
Put some clay underneath
Here to help block that out. So this looks like it might come free a little more easily
I'll do that as long as I can pretty much get the mother mold
To hold around it a little bit on the back to cradle this to make sure that doesn't move
During you know the casting I'll be happy. So this is a technique I learned but it's normally done with straight pins
I don't have straight pins on hand that I know of
So I use paneling nails. I just push them through the jacket and then you take your clay and you'll see
So you roll a coil and then you pinch it
On here and you make a wall
so you'll make a wall of clay and
Then it'll end up looking like this. So instead of using cards
I just decided to use clay and these come out and that hole will seal up
So this when this punctures, it'll push the silicone apart pull it out closes back up. It's kind of like a self-healing
Hole, but I wouldn't leave it like this overnight. I have seen silicone
That's when it's left a certain way a long time like I'm talking weeks and months exposed to the fluctuating temperatures
it will reshape itself, so
Overnight, it's probably okay. I'm not going to do that
I'm going to cast this up and try to get this out of here as quickly as possible
Yes, this does damage the sculpture underneath
so if you're using this method to cast an existing form that's say porcelain or
Ceramic or bronze you are going to scratch it up and dent it
So I have the clay form under here, which is not going to be salvageable once this mold is finished. So I'm prepared for that
And it's okay
So I'm just going to go ahead and grease this up after I put that clay on there it all get greased up
And I'm just going to start throwing some plaster on there. I'll do one layer of plaster
then I'll put down the
fiberglass cloth
And try to pull that apart a little bit to open up those
That space between there
So do one layer of plaster and then this I'll pat that all over and throw a second layer of plaster on there
And it should be pretty good to go
and then once that's done, of course, I'll have all that out and then I can do that last section and
Then we will drill the holes
And by the way, if this wall ends up not being high enough for holes. I still have this section that I can drill through
So it'll be bolted here this one half and this half it'll be bolted
But in order to keep this from flapping open like a book that'll be pinched down there
So I know for sure that one I'll be able to do that
So I'm not too worried if this seam doesn't close up because it'll be secured here in here and then down here. Okay, all right
Okay, so this is the first layer of plaster
The first you know the thing about like mixing plaster is it behaves differently with different ways of preparation
so when I mix this up I
Didn't let it sit for one
so it's that for you know, as long as it took me to put the cup back in the bucket and then I mix it up and
I didn't go crazy
You know, I just mix it up enough that it was wet and as I'm slapping it on there
You know, you got about 15 minutes and then it's set up. So it was still soft. It's still soft actually
but I knocked down the high edges like there's like chunks sticking up like
Very badly. Anyway, I knocked those down and then that way I can lay my
Let's say I use this piece here as an example
That way I can lay it down on top of it without this like huge lump underneath of it
So for the next batch when I mix it up, I will let it sit until that lake bed effect
You know as I sipped it, you'll start to see a crease that lake bed
we let it sit sit sit maybe 10 minutes and
I've had these batches like if you let it sit for 10 minutes and
Where it just completely soaks and it looks like wet cotton wet insulation
You know the spray and insulation
and
Then you mix it up very nicely and you continue to mix it as you use it. I've had it last an hour or more. So
Anyway, that's what I'm gonna do for this next layer to make sure I've got it right where I want it
and
Then when it starts to kick I can slather it on and really start to smooth it out
So it starts to look more like this
So that's where we're at
So I just want to make a point of showing here that stuff like this isn't a big deal
We can go back here and clean this up
After that dries don't do it while it's wet
You'll smear it
but once it dries you can chip it right off and
Then you can peel this off and grease these two sides and then get that started
There are some areas over here that I didn't get as thick as I wanted to before the plaster set
So I can go back there and when I'm working on this jump back over and throw a little more on there
if it gets too dry, I want to make sure that I
Hydrate it
You know plenty well before I go back and cover up some of these areas. So we're almost there. I just wanted to
Share that so I got that cleaned up. I have all the clay peeled off. I pulled the nails out and
as I mentioned before it was self-healing so they just kind of closed up can't even tell that they were there and
Anyway, I have this all buttered up with Vaseline and
You can see how nice that looks so what I'm gonna do is
Mix up a batch throw down some plaster that first layer and
Then I'm gonna go in with the second layer of plaster and put down some of the fiberglass cloth that I've pre-cut
into pieces and
After we do that, we'll let it set overnight and then I'll come back in here and drill the holes
You know to keep this together. I can put hold that together with bolts and wing nuts and
Anyway getting ahead of ourselves. There we go. Okay, so you can see that I have this done now
This here don't worry about that
I know sometimes we like to have really pretty molds, but it's not a big deal
That's not going to interfere with the function, of course, and you see I got a total mess down here
so after this cures
Say 24 hours or longer
I will take a saw or a
Sure form like a rasp and I'll just take that to this edge, you know and really work this
I
will probably hit the fiberglass and
The fiberglass then will kind of you know stick out and fray
You know at the top
And you know if that bothers you
Then I suggest maybe getting a cutting wheel of some sort
Whether that's on an angle grinder or a Dremel and then just taking your time and walking through
You know a angle grinder you can make short work of this
But you know you want to do it outside because it's gonna look like you kicked a bag of flour in your studio
So this here a little easier and then really you only need to go down as far as you need to to split the mold
open but make sure
you get your
Make sure you get your holes drilled where you want them
I like to take a marker and pre-mark ahead of time
That way I don't find myself in a pickle wishing I drilled back further. I can just map it out first, you know
kind of like measure twice cut once kind of thing so and
Yada yada yada
Before I actually demold it too
I think what I'm gonna do because I want to put this in a rotational casting machine, especially because of this leg hanging down
is I'm gonna put a
bottom like a wood board a
wooden piece of wood there and it'll probably just be
this maybe even this thing that it's sitting on and then I can drill a little plug in the bottom which I can pour in my
material medium, whatever I decide to use and
Then I can make some type of plug to plug that and then I could you know
Have that strapped into a rotational casting machine
So this is cured this is the next day
This stuff by the way is very drying to the point where even like nitrile gloves will wear out pretty quickly
You can get thicker gloves all the better if you want to use your skin just be prepared that it's gonna dry out pretty
pretty much
So have lotion
So I've used this to go down this side. It's taking some time a little bit of elbow grease
I did drill I put a quarter-inch drill bit
Ran it through the bottom
in case I elect to use this as the base, which I likely will and
I took the marker still see some traces of felt tip marker
permanent marker Sharpie
So a quarter inch drill bit ran it through and when you run it through like I ran this one through at an angle as such
So that I know I can get the bolt through here
You know if you drill it straight through like this
You won't be able to spin a wing nut and you won't be able to feed the bolt in so, you know
Keep that in mind
so I got a I
Don't have a hole down there. I need to drill that one yet. So I got that that these
And went around and
You know just keep going and
So now I'm just kind of wiping it off to help knock some of this stuff off
It's just a lot and the particles should be big enough from sanding
that it'll fall out of the air pretty quickly, but you know, it's still good to wear a mask because
You know, I don't know if this stuff is silica free or not, but you don't want to get silica particles in your lungs
if you make this a practice a
long-term exposure to silica can cause
chronic lung disease
Which means you're not bouncing back from it
Okay, so I just want to say that typically what I do when I
cut
Silicone as I will say like this is my silicone
I'll put the blade down and say like this the difference here between the gray and the black is my parting line my desired parting line
I will place it like this and then go back and forth as I drag
So that the tip is staying on the line to the best of my ability
You see
So you end up having on the surface a pretty much straight parting line, but at the top you create a type of zipper
Effect because the knife is going back and forth back and forth
And then
You know in theory and it works have proven it when you put your silicone back together and the fingers rest
You know, they don't have a tendency to just fall through like a straight cut
Sometimes these are too thin and when you cut it, they just fall they don't line up, right?
You'd have leakage and things like that. But when you create that zipper, they hang on each other better and it creates a really nice
Casting and then when you go on the inside to clean it up
You know, it's something that you can just knock down with the edge of the razor
You don't have to go in there and do a major edit. So that's what I'm attempting to do here
But because I've used the business cards, I've already made a straight line
so I'm gonna try to part this and then do that cut in between so
This I just kept going around doing that pattern you can see how hopefully
You can see how this created a type of tooth effect
I kind of had to work it in reverse this I'd be in the flat and this I'd be in the inside
So anyway, this side came off
Happy days and this side I went down here
because
This wasn't hindsight, this is a preference I made beforehand. I
Guess it could be hindsight in some ways, but the leg I decided to leave it on so I could cast it one piece and
That created the complication with this so I I knew I was gonna have to do that
So I left this bead sticking up. I went ahead and worked the knife through there have that opened up
So hopefully we can get this
Finished at molding this here's the back of it
Looks pretty good
And now I know I have some hooks
This is the rebound 25 from smooth on
There's a link in the description
And I don't know that I showed this but I used
Krylon crystal clear
It's an acrylic I
Put a good coat of that on the clay before I applied the rubber. Not only does it make it cleaner
But it gives you a much
Better surface quality of the mold. So whatever you cast inside of it is gonna have a more type of polished surface
Versus the tooth of the clay
Do not use the polyurethane. You'll regret it
It's a tech tip
Okay, so sorry you didn't get to see the last part of it
Camera shut off
So this is the inside it came out
This ended up being
Thicker than I anticipated which is fine. I was actually hoping it would be a little thicker there
This is gonna be good some areas were as thin I might get some product trapped in there, that's okay
Or it's in a very inconspicuous area, that's why I couldn't get to it in the first place it's gonna work
So here's one half
And the foot comes out nice
the other half
And those don't hold together
so what I have to do is
get the
Mother mold pieces
And you remember this ribbing on the back now in theory that's that should
Go right into those slots and this
Projection nipple type thing that should stick in that slot pretty well to help add support and registration
Okay, so that's one half of the mold and that is pretty good
You know your first casting may not turn out don't be discouraged
You'll learn a lot from the first casting about your mold, so this is the mold
Fully put back together. I
Use the board that I cast the piece on I
Just drilled some holes so one two three four and just use some weak wing nuts there to tighten that down
So it came back together
I
am building the rotational casting machine now and
I might drill a hole then in the bottom of this and create a plug I
could probably use like a plug for a sink or something of that nature and
Once it's in the rotational casting machine will be fine
But I just wanted to give a look here
Looky-loo to the finished product of the mold
It looks like I forgot a bolt
There we go
I wanted to take a moment to to open this up and show you guys what it looks like put back together
See when that boards a little beat up on the outside
It was I was able to plot it out
So I know where to drill my hole on this side you can see the footprint of the original
The silicone has a tendency to grab the surface of the wood and clean it
Like when you peel it off so here we go
That's what it looks like
From the negative view the inside view
The internal view and you can't see any seam lines in here
The way that I cut this it goes back together that you're not going to see any seam lines and it's evident, too
because like here
This is where the actual seam is
Maybe you can there you go
And this is great because that will create an almost flawless surface something that buyers
collectors and
Maybe even your other artists peers aren't going to see
It's really kind of neat what the inside of these look like
It's almost like an art form in itself
But you can see how I created the ribs on the inside and those are keeping that up against this wall
That's keeping that nice and flat. That's very very favorable
when this board is down that'll
kind of flatten that out a little bit, but
Yeah with this kind of showing that gap means that this is kind of curled up a little bit curled in
So you might get a little spillover, but that's real really simple to clean that up. So
Anyway, this is great. This is a really good mold. I can't wait to cast something in it and
if you guys
Are interested in this kind of thing, you know, make sure you thumbs up comment
Let me know that this is what you're interested in seeing if not
I'm just gonna keep making what it is that I'm interested in
And I'd be interested in making things that you're interested in too. So let me know you guys again
John Burns with John Burns fine art signing out. Take care