Andromeda has inspired painters and sculptors alike over the centuries. She was offered as a peace offering to pacify the great sea monster, Cetus, before being rescued by Perseus. In fact, it’s been alluded to that Andromeda’s mythos is the backbone for Princess & Dragon imagery / stories since then. My sculpture started out as an Alphonse Mucha inspired piece. As my sculpture progressed the anatomy challenged me as I was working in a model-free environment. Reference photos and some anatomy books were my guide. This inspired me to keep her as a nude sculpture. See how I cut apart my sculpture in preparation for molding. In upcoming videos, I will use this piece as my base line for my draped figure with a headdress. Thanks for coming along! FREE EDUCATION all day! SOCIAL MEDIA Follow me for more fun and see what goes on behind the scenes in my studio. I can also be found on: http://www.Instagram.com/jonburnsfineart/ http://www.Facebook.com/jonburnsfineart/ http://www.LinkedIn.com/in/jonathan-burns-08a05b35/ CLAYTON BOYER CLOCK DESIGNS: (non-Amazon) http://lisaboyer.com/ I am an affiliate with Amazon. Please follow the links below to purchase these products through Amazon.com. Thank you. BOOKS - technical Edouard Lanteri – Modelling and Sculpting the Human Form https://amzn.to/2PxwftU Stephen Rogers Peck – Atlas of Human Anatomy for the Artist https://amzn.to/3swUwyS John H. Vanderpoel – The Human Figure https://amzn.to/2O7k46Q George B. Bridgman – Bridgman’s Life Drawing https://amzn.to/2O43XH6
BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3lYdoEk Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3ssh9Ey
SCULPTING MATERIALS & SUPPLIES CraftWrap - Plaster Cloth Gauze Bandage for Scenery, Crafts, Mask Art, Models, Molds, Keepsake Belly Cast - Each Roll 4 inch x 15 feet (Single Roll) https://amzn.to/3cwRvJg 1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins https://amzn.to/3fjUq9V Carriage Bolts ¼” x 20 SS, U-Turn, INC. (50 count) https://amzn.to/3lZtayK Autobody Panel & Trim Removal Tools (for demolding/separating your mother mold) https://amzn.to/3w9LXML Steel Hex Bolt, Grade 5, Zinc Plated Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/SAE J429, 1-1/4" Length, Fully Threaded, 1/4"-20 UNC Threads, Imported (Pack of 100) https://amzn.to/3ctbs3x 60 Pack 1/4" Wing Nuts Zinc Plated Fasteners Parts 1/4"-20 Inches Butterfly Nut https://amzn.to/3u31V9r AES Industries 294-1 Replacement 2-1/2" x 1-5/8" Curved Surform Blade (6 Blades) https://amzn.to/39q8efg Stanley Hand Tools 21-115 7-1/4 in. Surform Shaver https://amzn.to/3svUMhB JB Weld 8277 Waterweld https://amzn.to/3cwSZTQ Chavant NSP Medium – Sulfur FREE, 2lb Professional Clay (Green) https://amzn.to/31tVqA8 Alja-Safe Life Casting Alginate 3lbs (by Smooth-On) https://amzn.to/3wfZiDl Smooth-On Mold Max 30 (Trial Kit, pink color) https://amzn.to/3fkM41Z Smooth-On Rebound 25 2lbs (Trial Kit, orange color) https://amzn.to/3m0MuvI Smooth-On THI-VEX https://amzn.to/3ruTeTL Krylon Acrylic Spray Crystal Clear 11oz. https://amzn.to/3cvMDUU Premium Baltic Birch Plywood 6mm (1/4”) 12” x 24” by Wood-Ever (I give Woodever two thumbs up for quality birch ply) https://amzn.to/39q9XS2 Titebond Original Wood Glue, 16 oz. https://amzn.to/3sx2E2o Dental Tools / Waxing Modelling Tools https://amzn.to/3sJ4ai9
This is Andromeda. I'm getting ready to do the molding on this one, but I thought it would be
good to share how to prep a sculpture for molding. I think one of the most intimidating things about
starting mold is making sure that, you know, we've got all of our ducks in a row before we get into
the process because the materials are expensive and the sculpture is priceless and, you know,
so we learn as we go and hopefully our skill improves as we go so we can look back and maybe
realize things weren't such a loss. But let me share what I know and maybe this will make a
difference here. So what I'm going to do is remove the arms here to make this sculpture
more simple. I mean, not the sculpture, good lord, to make the mold more simple. Okay.
Stuff like this just really complicates and you ask yourself in the end, why did I
make so much work for myself? So just cut this right here. These are easy areas to patch
and right here. So the first thing I need to do is make registration marks.
So that was pretty painful. So my tool that I'm going to get in there and do some surgery
is, you know, about yay big. So I need to make sure that I can get that tool
inside of there to get that squared away. So what I might want to do
is going to be easier to fix this one is to make that a little longer. Just give yourself an inch
that registration. Try to keep it straight and connected. It might even go a little longer.
Okay. Now the fun part is we're going to get in there with this ceramic. This is for cutting your
for cutting your pots off of the bats for the throwing wheels. So you can go to your ceramic
store or go online, Amazon and go ahead and purchase this. Anyway, we're just going to
slip it through there without tearing up her face too much. I'm trying to do this for the camera. So
forgive me if I cut you out for a second. Okay, now remember which way you pull
left over right or right over left. So I just went left over right. As I pull,
I can feel resistance and you can see how much just pulling a wire through your sculpture
So we're looking for the height of our cutting tool. And now this one's a little more important
because this is where I'm going to make my mold. The first one, I'm going to patch up. But right
now, I just do I was talking. Anyway, I think I got it right here. Okay, so there's the clay
that I lost off the wire from the inside. I'd say that's not too terribly bad.
But you can see now how the width of my clippers can get in there easily and cut that.
Let me just get this one done. This is probably the most painful part of the whole process.
Switch that because I don't want this wood thing hitting her in the nipples. Okay, so
this time I'm going right over left. I feel resistance. I'm not making any more.
Very gingerly remove it and move down the length of the tool
or the width. And this is going to be my mold line right over the left.
There's some clay and I saw some ricochet. So what I'm going to do next is while I have this
in this state, get these little excessive boogers. Not much. Don't get neurotic. Just
they're fine. So I want to push down where I lifted up the sculpture. It kind of flared out
a little bit. I just want to keep that tight. I don't need stuff getting all cattywampus when
it goes back together. So I'm just gently giving it a pat or a little squeeze. And that's why I
was removing those little boogers. And don't squeeze it flat, you know. We're just trying
to keep the form relative to itself. You don't want things flaring out. I put sculptures back
together and the casting material. And when the mold maker didn't push that back, there's a part
flared out. And you know that all trickles downhill. Okay, so we can see we still have
our parting line. There you can see it. And there we can see it. So I'm not going to use this line
as the cut line. We're going to go close to it. We don't want to tamper with that. We want to
make sure that that stays true. I'm not sure where the wire is, even though I felt it. It's generally
in the middle. So I have to point this tool as you push in. Just be gentle. Here's what we're
going to do. Okay, we're going to use an X-Acto blade. Try to get in here as surgically as possible.
And I'm just poking. There we go. I've got resistance. So I know that that's the bone.
And I'm going to trace along it until I get to the bottom here. And then this side also,
the same thing. I hope you guys can see this okay. Yep, sweet. I hit bone right away.
And okay, we've got our cut here. That's how we're going to open it up. And our cuts,
top and bottom. And this one is going to be the one that we mend on both sides. We're going to
end up mending that and mending that. And that's going to be our cut for our molding. Okay, and
that's going to be our registration line, which ultimately we're going to leave the bottom and
this down. We'll cover the rest back up when we patch it up. Okay, and that'll help us put that
there. So, you know, my cut cutter is on this side. So I want to make sure that if, you know,
I put it on that side, I'm okay with the wire sticking up in the mold. I can turn the cutter
tool in case you're wondering. In case I just want something broader. There we go. To kind of get that
apart. We can see inside of there also. I don't know that I can get a clean cut. There I can.
Okay, so I want to hold this because this cut is going to let it fall.
Oops, remember flat side down toward the side to mold. We can kind of set them back on there
and get an idea of what we just removed. So you can see like the different angles with the arms
putting it back on. Some people are more particular than others. If you cast this in bronze,
your welder, if he's worth his weight in salt, will be able to get that
line back up. Especially if you leave those registration marks
on there enough and then they'll use these outer lines to help connect it.
Okay, so there's that and plus, plus, plus, plus. While this is off, with these removed,
there's areas that I wasn't able to get into because of her head and stuff like that. So I
can get underneath here and double check this now and make sure this is the way that I want it.
And on that same token, this allows me access inside of areas like here and here and here
that I wasn't able to get to before also. Okay, just to close, I touched up the cuts here.
If you want to trim the wire inside back a little bit so it goes together a little better,
because when you cut the wire, it actually lifts the wire, like squeezes it and then
cuts it. So if you want to turn that back, do it before you touch it up there. But
keep working it until you have the fit that you want. Be slow, careful, calculated with your
touch-ups. I'm going to do more work to this. I've only been touching it up for about five minutes
or so. You can resize, I mean incise, re-incise your registration cut after you get it back on
there and you determine that's right. Get your tool and kind of, you know, again.
And the edges here will slightly flare out from pulling the wire through, so I just gently lifted
them up. And as they came up, I just kind of pulled them over the edge a little bit.
And if that causes a problem when you're putting this back together,
it's a lot easier to grind that off than to have it sticking out and, you know,
trouble lining up your form. So another tip that I want to give you is with calipers.
So if you have your calipers here, you can decide where the wire is inside of these
and then you can register with the wire to make sure you're lined up with the wire.
Especially when you're molding, make sure that those are lined up
just so. Or because if these end up coming apart, if you have a situation like this,
it's going to mold. It'll align and you're going to have to be dealing with every one after that.
The other thing is when you have the wire cut back, sometimes it'll leave a little hole or
divot. So get a little bit of clay and touch that up so you don't have silicone running in there.
Okay, when we go to mold this, we will put like a plug anyway on top of it on both sides
so that as the silicone goes up past it, you know, we have some way to get the
casting material inside the mold. So there we go. I think it looks pretty good.
We did a good job. And if you have any questions, go ahead and write a line in the comments
and I try to get back to you within 24 hours. So this is good. I'll finish touching that up
and we'll be set. So next stop is going to be Molding Express. You can see how much easier
that's going to be to cast that as a two-piece mold versus trying to come up with something
really wild for that. This would be so much easier. All right, you guys, life is good.
I hope that helped. I hope it helped. You guys are great. You have greatness inside you.
Let's get out of the way so it can shine. Get out of your own way.