In this video series I show how to make silicone molds for sculpture starting with how to make a silicone jacket (pt.1), next I’ll show how to remove the armature supporting pipe (pt.2), then how to make the supporting mothermold (pt.3) and finally how to successfully open the mold and skillfully slice the silicone for a perfect seamless casting (pt.4). Be sure to Subscribe.
BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3lYdoEk Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3ssh9Ey
SCULPTING MATERIALS & SUPPLIES CraftWrap - Plaster Cloth Gauze Bandage for Scenery, Crafts, Mask Art, Models, Molds, Keepsake Belly Cast - Each Roll 4 inch x 15 feet (Single Roll) https://amzn.to/3cwRvJg 1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins https://amzn.to/3fjUq9V Carriage Bolts ¼” x 20 SS, U-Turn, INC. (50 count) https://amzn.to/3lZtayK Autobody Panel & Trim Removal Tools (for demolding/separating your mother mold) https://amzn.to/3w9LXML Steel Hex Bolt, Grade 5, Zinc Plated Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/SAE J429, 1-1/4" Length, Fully Threaded, 1/4"-20 UNC Threads, Imported (Pack of 100) https://amzn.to/3ctbs3x 60 Pack 1/4" Wing Nuts Zinc Plated Fasteners Parts 1/4"-20 Inches Butterfly Nut https://amzn.to/3u31V9r AES Industries 294-1 Replacement 2-1/2" x 1-5/8" Curved Surform Blade (6 Blades) https://amzn.to/39q8efg Stanley Hand Tools 21-115 7-1/4 in. Surform Shaver https://amzn.to/3svUMhB JB Weld 8277 Waterweld https://amzn.to/3cwSZTQ Chavant NSP Medium – Sulfur FREE, 2lb Professional Clay (Green) https://amzn.to/31tVqA8 Alja-Safe Life Casting Alginate 3lbs (by Smooth-On) https://amzn.to/3wfZiDl Smooth-On Mold Max 30 (Trial Kit, pink color) https://amzn.to/3fkM41Z Smooth-On Rebound 25 2lbs (Trial Kit, orange color) https://amzn.to/3m0MuvI Smooth-On THI-VEX https://amzn.to/3ruTeTL Krylon Acrylic Spray Crystal Clear 11oz. https://amzn.to/3cvMDUU Premium Baltic Birch Plywood 6mm (1/4”) 12” x 24” by Wood-Ever (I give Woodever two thumbs up for quality birch ply) https://amzn.to/39q9XS2 Titebond Original Wood Glue, 16 oz. https://amzn.to/3sx2E2o Dental Tools / Waxing Modelling Tools https://amzn.to/3sJ4ai9
Hi there YouTube, this is John Burns with John Burns Fine Art.
Thanks for being here today. We're going to be working on the mold for Andromeda here.
We're going to start out with the inner jacket which is going to be silicone, Rebound 25 from
the Smooth-On company. I'm also going to be using a product of theirs called Vivex,
which helps thicken it. Rebound 25 is for vertical surfaces and the Vivex helps it
spread like peanut butter so we can definitely stand up silicone while it's wet, which is great.
So if this is of interest to you, stick around. Please hit the subscribe button,
please hit the like button and check out the description below. My social media links are
there. You can see more of my work and what goes on behind the scenes and the items and
equipment that I use in my studio. So let's get going. The good thing about Rebound 25
is that it makes one-to-one ratio. There's no weighing. You can eyeball it. So I'm just going to,
for the first layer, you never use that much and a lot of it typically will run and pool
and settle. So the first layer is very thin. We're just going to capture the detail. That's it.
So I'm going to make a smaller batch. One cup this size could easily cover her entirety.
And these arms here. So what I ended up doing with the arms, I'm not going to do a block mold.
I did the dimensions and it's just too much silicone. It's not economic. So I made these
sprue funnels and I attached them and then I put a straw across here just to add support. This
really serves no other purpose. So I will cover this with silicone and I'll cover this up with
silicone up to here and I can always trim that back to where I need it. But don't go chintzy
and only bring it up here. Bring it up. So I'm just going to set this
upside down with the hands on one of these cushions that you get from an Amazon package.
Kind of these little air pillows. So I can set it on top of the funnels and rock it back on this
and it's safe. And I can actually put the silicone on it this way too and let that first layer cure.
Flip it over and then peel this off and then go and do the back side.
You know? You know? I think so. Okay and the other thing I want to point out is that I'm going to be
speeding this up probably times eight because it's about as fun as watching paint dry. So hopefully
you dig the tunes that I put with it and if you're ever wondering which container you should
pour into which, if you use the same containers, base and to the catalyst. I'm just going to use
a mixing stick and then I'm going to use a chip brush. Just a regular old chip brush to brush it
in there. So I am mixing this here one-to-one as I said and you can see how the two parts are
separated by the color. I'm only going to put you through this once with the mixing because I want
to make sure that you see what we're looking for here. So I scrape the sides and I scrape the bottom
and I keep mixing until the white is completely mixed in where I can't see it anymore.
It usually takes about three minutes and make sure you scrape your stick off as I'm doing there
and once you have that all mixed up you can begin to apply it. If you want to degas it you can
but do make sure that as you're pouring this do what they call the high pour method
and pour a very thin stream because this helps eliminate air bubbles in the trail as it gets
on the sculpture and then when you go over some of the areas that tend to have a deeper recess you
can blow on that and several times if you need to just to make sure you get the air out of those
areas. So I have this times eight so if you see this product running where it looks like it's
running quickly it's actually running very slowly. So there is a limited pot life with this
product about 30 or 40 minutes and then it's going to start gumming up and it's not going to
move around as easily. Make sure when you do things around the toes and on the base where
you've signed your name that you don't miss any areas that air might be trapped. So let it sit
for maybe a few minutes and then after a few minutes go by you can examine those areas where
it's kind of run a little more thin and you can usually see some type of space that hasn't been
filled behind the silicone. So just blow on that as best you can or if you have compressed air
very gently release of compressed air and work those air bubbles out. So on the second coat
we mix it up the same as before one to one and going to put in the 5x. I do about five mil per
pint and that gives me a pretty good consistency and what's great about that is now we can truly
paint this vertically up the sculpture and use it on these smaller pieces without
concern of it running. So as you can see I'm just applying more of the silicone as I go.
I can see areas that need worked and as you're applying this thicker silicone to the cracks
really make sure you're not just buttering it over without making sure those cracks are filled.
Really kind of blot the stick on top of those recesses to make sure that those crevices get
filled properly. Now I have the stick here I'm applying it to the sculpture. Do not use the
brush. I mean if you want to give it a shot you can see what I mean firsthand but dab the brush
into these detailed areas like the face the nose and don't be afraid to go thin at first to make
sure that you get all the air out of those really deep recesses and then you can begin to kind of
butter it over like a butter knife and some of those pinch point areas you'll notice that I was
pushing that through from one side only. As that comes through I can make sure that there's no air
getting trapped in there because if you try to push the silicone through on both sides there's
a good chance you're going to have some trapped air and with that thin base coat you never really
know how that's going to behave. So make sure that all that air is out of there before you
smooth more of the thick stuff over it. So make sure you get all the crevices first after you get the
crevices like between the legs and the facial details and your undercuts and things like that
smoothed over then you can begin to apply more of it on top of the round forms. So I know that
this looks like I'm moving very quickly but of course that's just an illusion. I took my time
and I do take my time on these because this is mold and the idea is that you're going to be
making many copies and you want to make sure you get it right so you have less work to do
on the other side when you have your casting. So you know smooth it over round out the high points
and make sure that those high points don't have hooks because as you make your mother mold what's
going to end up happening is that will cause trouble when you're trying to reseed it in the
mother mold. Of course if you do end up having hooks after the silicone is cured you can use
an X-Acto knife or any other type of sharp blade and just trim that back. So you know look it over
between coats and make sure that it's as smooth as you can get it within reason and get it ready
for the next layer. So in this layer here I'm starting out by coating these arms. This is
leftover from that second batch so I'm not afraid to set this down on top of that little silicone
block that I have there because this will adhere to that and I can trim around it if and when it
gets stuck and it does. I trim it back. So continue to set this up. I used a scrap piece of silicone
under the fingertips. This is silk pig. This is a very concentrated pigment. It doesn't take much
and you just put a little bit in your batch and this is going to help us distinguish between the
layers. So where we have the base coat in the second layer I just put this on my stick and
stir it in. It gives me a little darker tone. Of course I'm putting in a little more 5x to thicken
it up and I can spread that on and this color differentiation allows me to see where I've been
and where I haven't been. If you've ever tried to apply silicone without having something to help
you distinguish whether it's the texture that you're applying it on with or the color sometimes
you can get some really thin spots and it ends up showing up sometimes when the silicone tears
or if you end up having like you're cutting your mold open and you have a thin spot.
So make sure you get everything as consistently as you can and this is a good time to start using
your mixing stick as a butter knife to create a smoother form. So maybe you were a little
stressed that your mold wasn't quite as smooth as you wanted it on the first
few layers. You know you can definitely continue to work at it with subsequent layers and get it
smooth. Okay so the arms look like they were thick enough. I went ahead and set them to the side.
I didn't show it but I put some more of that red mix on there and yeah it was thick enough that
I'm not going to add that final layer. So you can see on this final layer here I didn't need to put
any different color in there because the base color is of course different. So I can see where
I'm working again and I'm trying to round out any hooks the best I can to give myself the best
opportunity with the mother mold because as we start to put our parting lines in it we want to
make sure we have the most opportunities in case we need to change plans which I did with this one.
Where my parting line was originally going to be I decided afterwards that I needed to move it
and because the form was rounded out as well as it was it didn't create too much grief for me.
So stick around for those other videos that show how to make the mother mold,
how to get the pipe out of the back, and how to cut a mold open to do a slice mold.
So that does it here. Those are all the layers that I'm going to do. It should give me an overall
thickness of about three-eighths of an inch. There might be three-sixteenths of an inch up to
you know about I don't know half an inch maybe in some places. This is where we're at. Thank you
guys for coming along and keep an eye out for the mother mold video and the video that shows how to
remove the pipe from the back and how to repair the sculpture over molding. Thanks for coming
along guys and stick around here. If you would like to support my channel check me out on PayPal
at John Burns Fine Art and I do give back to the local charities
so I appreciate your support in that way. Take care.