Today, on Workshop Edits, my wife and I will show you how we transformed our exterior covered patio by installing about 150 square feet with a patterned porcelain tile over the course of a single weekend. Everything we used for the installation is below - reach out with questions!
Chapters: 0:00 - Introduction + Design Approach 1:04 - Tile Purchase + Space Preparation 1:48 - Tool Breakdown / Thoughts 2:06 - Tile Installation (Tile + Outdoor mortar) 4:38 - Dealing with Corners and Tricky Cuts 6:14 - Subway Tile Accents 6:38 - Installing the Step 6:57 - Grouting and Cleaning 8:14 - Final Shots and Thoughts
📲 Check me out on SOCIAL MEDIA! INSTAGRAM: instagram.com/workshopedits FACEBOOK: facebook.com/workshopedits
Thanks for watching! Zach
What's up, guys? I'm Zach. Welcome back to Workshop Edits.
In today's project, I'm going to take you out of the shop and into my backyard
where my wife and I will show you how we transformed this covered patio
by installing some awesome-looking mosaic tiles.
Now, this is a project that my wife has wanted to tackle
basically since we moved into the house,
and after a little bit of convincing with me,
we went ahead and tackled it this past weekend,
and I am so happy with how it came out.
We'll walk you through the materials that we used,
the tools that we needed for the project,
some of the trouble that we ran into, and talk about the cost.
But overall, awesome project, totally doable by a couple in a weekend,
and yeah, super happy with how it came out.
So let's go ahead and get started.
We've been slowly trying to fix our backyard
since we moved into our home about a year ago,
growing grass, building extra storage.
The first step to making over the common areas
was giving the covered patio in our backyard a much-needed upgrade.
It was level and flat, so we were starting from a really good place.
Brooke was really into the idea of creating a mosaic tile area
to cover the old concrete.
After some more research,
I was convinced it was a great way to make over the area.
Brooke did most of the tile homework on this one,
what type of tile would work for our situation,
a covered patio on top of concrete that was existing
and had already cured many years ago.
We landed on a really cool blue and gray porcelain tile,
and the website we bought from was great
in helping us estimate the amount of tile we needed.
My recommendation for buying tile is
if your supplier allows returns,
is always overbuy by about 20%
to avoid having to go back to the store mid-tiling to buy more,
which we did.
And I didn't film it, but the first thing we did
was power wash the whole patio,
removing debris, dirt, anything that accumulated over the years
so we'd have a clean surface to work from.
After it dried, I used a leaf blower
just to do a final pass and get rid of any of the final dust.
Prep was the biggest key to being efficient with this project.
Make sure you have all your supplies and tools set up
and ready to go because once you start mixing that mortar,
you're under a time clock.
Now, we aren't tiling pros,
and we don't really have any of the tools you need to tile.
Luckily, power tools for a project like this are pretty minimal,
and we ended up renting a tile saw from Home Depot.
It was about $88 per day,
but if you plan accordingly,
you can work to get all your cutting done in a single day
to minimize the cost.
Now, I'm using an outdoor rated mortar
for tiles that are under 15 inches long,
and it only needs water added in to get things going,
about 5 1⁄2 quarts of water per 50-pound bag.
And if you're using a different bag
or a different type of mortar,
just check the instructions on the bag.
It's super clear.
Another tool we almost rented was a hammer drill to mix.
You can do this by hand, but that would be a pain,
and lucky for us, we were able to borrow one from a friend,
so we only needed to buy the $14 mixing attachment for it.
Mixing was simple.
Add water, add the mix, blend for five minutes,
wait five minutes, and then do another minute of mixing,
and then you're set to go.
Most important part of this project
was getting the outside rows correct,
as it was the main point of reference
for the rest of the project.
So we took some time laying out
where pieces would go on the edges,
making sure the overhang was correct
so that when we put in the vertical pieces on the edges,
everything lined up.
When it was time to go, using a flooring trowel
specific to the size of the tile we were laying,
we could begin in the corner, first spreading out mortar,
and then coming back with the 1⁄4-inch notch side
to spread out evenly.
The point of this is to allow you to lay the tile
on top of the mortar and push down
to ensure even coverage underneath the tile.
We read that 80% coverage on the bottom
was ideal for indoor tile, and 95% was ideal for outdoor.
Since we were covered but still outdoor,
we just aimed for the maximum amount of coverage possible.
Now, DIY tiling, in my opinion,
is definitely a two-person job.
While Brooke laid out and spread the mortar,
I could position each tile in its proper place.
Again, the outside row was key,
so we took our time on this first line,
laying each piece, lining it up properly with the edge,
inserting the 1⁄8-inch spacers where necessary,
and pushing down and working it into place
to ensure even coverage of the mortar.
I also went back with a level after six or so pieces
to ensure things were flat wherever possible.
Then it was just a lot of rinse and repeat.
We got super lucky that somehow the end piece
up against the wall required no cutting
and left the perfect amount of space
between the tile and the wall.
We read that about half an inch
between the wall and the tile was ideal.
Brooke would keep laying mortar, I'd keep laying the tile,
and we really got into a rhythm quickly with this,
along with lower back pains and blisters on our hands.
It's pretty amazing how a good first row
with tiny spacers and a frequency of checking
for evenness can lead to a very tight-looking pattern.
Once we started getting to the corner areas,
we decided to tackle them so that we didn't work ourselves
into a corner and then trap ourselves overall.
This was the first time we had to start making cuts
and things slowed down a lot here.
Lots of measuring, cutting to fit,
then laying the piece in place.
We couldn't really get into a groove here,
but having two people certainly helped.
Honestly, the toughest part was just making sure
we measured properly and cut the pieces properly
as to not mess up the pattern,
which we did a number of times.
Now, I forgot to film the installation of this,
but while Brooke finished the corner pieces,
I headed over back to the tile saw
to cut all of the vertical edge pieces.
Thankfully, our edge border was nearly exactly
half the width of our tiles,
so we wasted very few of them in the process
of cutting them in half for the border.
Corners were a little tricky.
I originally planned to notch out corners
with a diamond cutting wheel on my angle grinder,
but the tile were thin enough
that I could measure where needed,
for example, around the step into our house
and then notching out each corner on the saw.
And it helped to notch out each side
and then flip it over to cut upside down.
And at that point, the P shoe cutoff basically fell off.
This corner around the post
was probably the trickiest piece to cut.
I knew that eventually it would have to be cut
into two pieces, but the right way to do it
wasn't all that clear to me
until I got into actually figuring it out.
I ended up measuring one side,
notching it out on the table saw
and then laying it into place,
and then notched out the rest of the post
from that cutoff piece
and placed it in its final corner.
It was simple in final design,
but executing it cleanly took a lot of effort.
In the end, it came out great
and it almost looks like a single tile.
Now, a few months ago, we did a subway tile in our kitchen
and had quite a bit left over
that we unfortunately couldn't return.
Somehow, those tiles ended up being
the exact same height as our step.
So we had the idea to do a white vertical board
to help make the two levels pop and look more distinct.
And this was great as it meant
we could just apply adhesive to the sidewall
and the backs of the tiles and hold it in place.
And the reason we put extra adhesive
on the back of these is because
it would be in such a heavy foot traffic area.
Last up was then doing the final step,
which was just putting down two rows
of the same mosaic tile.
And we started in the corner that would be exposed the most
as it helped make the step look the cleanest.
And after spreading mortar for eight hours,
Brooke had definitely earned
putting in the final piece of the puzzle.
We then let the tile mortar cure for 24 hours
per the directions on the bag.
Next up was grouting.
Mixing grout was just like mixing the mortar.
Add water to the dry mix.
The color we used was called alabaster white, I believe.
Mix in for five minutes, let sit for 10,
and then start working it into all of the grooves.
Now, this doesn't have the longest working time.
So again, having two people working was hugely helpful.
While I began applying grout to corners,
Brooke went around to all the areas
where we weren't as good and clean about applying mortar
and used an old chisel to scrape off that mortar
before we applied grout to those areas.
Then, as she continued to apply grout,
I could begin going over everything with a wet sponge.
We read that you shouldn't apply more grout
than you could come back to within 30 minutes
and begin wiping off the excess material.
The process for this is pretty simple in concept,
but it is time-consuming.
The thought, as far as I understand it,
is that you use a moist sponge
with most of the water wringed out
to wipe off the excess grout,
then wash it in a bucket with water,
wring out the sponge again to clean it off,
and then repeat the process over and over again
until you're left with only grout in the grooves
and a really clean tile surface.
I think we did four to five passes over the tile
to get this right.
As you can see in the final pass,
we would do only five to six tiles at once,
clean the sponge, and then repeat
as to make sure we were working with
as clean of a sponge as possible.
And after two days and lots of long-term
inflicted back pain, we were done.
We learned a ton in the process,
mostly that tiling can very much be
a DIY project for beginners
with the right preparation and lots of effort,
and that most of the tools you need
can be easily rented for cheap from your local Home Depot.
We love how the final design came out,
and it's amazing to see how much the space
has already been transformed.
Next up is painting those walls a different color.
The banana cream yellow isn't doing us any favors,
and Harley definitely agrees.