You might have seen the words like DTS-i, HET, APDV, SEP, ATFT or i3s written on motorcycles or scooter. These words in actual are the names of advanced technologies patented by the motorcycle companies. These Motorcycle companies has developed many state of the art technologies over the past few years. These technologies have not only improved the performance but have also increased the sells volume. Some of these technologies have even become trade mark of these companies. Customers get attracted by the fancy names of these technologies without even knowing the real concept behind them.
AI Generated·May contain errors
Video Summary
AI Generated
This video explains the various advanced engine technologies used by different two-wheeler manufacturers. It clarifies that terms like DTSI, i3S, and BlueCore refer to specific engineering enhancements designed to improve fuel efficiency, reduce emissions, and increase overall engine performance.
Hello friends, welcome to Mechanical Tech Hindi
Friends, you must have noticed
that different companies
Two-wheelers are there in them
Some unique letters are written.
As in DTSI
DTSSI
APDV, ASFS
ATFT, I3S
HET, BlueCore
What do CP and Maximum mean to these people?
I have absolutely no idea about it.
First of all, let me tell you that however many there are
These are the advanced letters used in the engine of that vehicle.
Talk about technology and proceed further with it
In the video, you will see all the technologies one by one.
If I tell you about it, please watch the entire video, and if
If you are new to the channel, please subscribe to the channel.
Certainly, I'll do it right away. First of all, let me
Now, the first technology is DTSI, which means Digital
Do
Twin Spark Ignition and patented by Bajaj Company
It is used by Bajaj Company in their two-wheelers.
Now, friends, there's a word—ignition—which you'll see later in this video.
You'll hear it many times, but first of all, let me explain the ignition
Let me explain: "ignition" means when
are
Air and petrol mixed together enter the engine's cylinder.
Enters inside, and after that, when the spark plug is
A spark, that is, a spark shoots out, and the air
And the mixture of petrol when it burns
This process of burning is what we call ignition.
Guys, this is what happens in the DTSi engine here
Two spark plugs are used.
First of all, you are looking here at the cylinder head
Yes, you are seeing a Spark Plug
And you too over here
You can see, this here is you
You can see, this is also a spark plug.
So, two spark plugs are installed.
Here you can see two valves, one is
The intake valve is the second one, and the exhaust valve is the first one.
I'll show you even a little bit of my twist.
So
So basically, what happens here is that once the combustion stroke occurs
It happens, meaning that once air and petrol need to be ignited, this
You are looking at the tip of one spark plug and the tip of another spark plug.
Here, a spark jumps out simultaneously from both at once.
Now, since the DTSi engine produces sparks from two spark plugs,
Spark occurs, which has the advantage that in engines of this type,
the mixture of air and petrol inside the engine's cylinder
It burns more quickly because of two
is completed, and from this
The benefit is also that the rest
flame compared to the engine
is that the one called Chingari
40% less
One has to travel all over.
To burn the entire mixture
And from all this, the benefit we gain is this
It turns out that the DTSI engine
The engine there shows better qualities, which become apparent upon closer inspection.
I mean, even the mileage is worth looking at
It gets reduced. The emission rate goes down.
That is, the smoke that comes out, the exhaust gases that come out, that
It comes out less, and along with it
The performance is also very much
becomes better, and I will also give this to you
Let me tell you that if the DTSI
It's an engine there if one
Four valves are used in the cylinder.
Then from those engines, we get even more
You can also observe even better performance.
The next technology is DTSI technology.
And its full form is Digital Tool
Twin Spark Swirl Induction is also patented by Bajaj Company.
has been done, and this is an improved version of DTSI technology.
Now, look here, the benefit you get from this is precisely what this technology offers.
has been done for the inlet port that is not the intake valve
The design has been modified, resulting in the air and petrol mixture
When it enters the cylinder of the engine, it goes straight.
No, it doesn't come in a swirl, meaning it comes around in this manner, rotating and circling.
mixes better and when the air and
If petrol mixes better, what then?
It happens that the rate of the combustible increases.
It becomes cleaner, proper, and complete.
It happens, meaning air and petrol are much better
It gets watered in this way due to this technology, and through this
Even our fuel efficiency, the mileage, which is
The performance engine's power output is much better.
You will also see this on Bajaj company's vehicles.
Next is APDV Technology full form done
Advanced Pro Series Digital Variable Ignition
Hero Company developed this system and technology.
Has been patented and Hero Company's motor
You'll find this technology in bicycles
Throttle position sensor
Now, let's see what TPS is.
It is the throttle valve of the carburetor.
It is posted there.
And the work of TPS is this.
How much the throttle valve is opening
Say it in simple words
How much throttle is that rider taking?
How much accelerator is it taking?
This data, which is TPS, is sent to CDI, and what is CDI
His job is to handle ACG, that is, Alternating Current
The generator is such that the current produced by it is known as CDI.
It stores it and sends this current to the Ignition
You know very well what an ignition coil is, don't you?
That is, either it's giving too little throat or taking too much.
It's either too little or too much—either way, he's taking it all the way to the end.
Its function according to the CDI is to ignite this spark plug.
The timing of the spark is something he keeps controlling.
And CDI ensures that this does not happen.
The more experienced the rider is, the more speed they are seeking.
But no spark came out from the spark plug
Ensures this thing
CDI and correct time
The correct amount of current
There where
The spark plug produces a spark, and thus the APDV
Technology helps achieve better mileage.
Better power is also obtained, and better performance is also observed.
Next is ASFS Technology, fully formed.
Advanced Swirl Flow Induction System and Friends
Hero Company has developed this technology.
Patented and Hero Company's 125 to 150cc
You'll soon see this technology on your bike.
There, the soul could be born, and due to this reason, their proper
Done
so that it can mix well and dissolve properly
We will get proper combustion, as well as better performance.
You get to see mileage performance and power
which is our DTSSI engine
This one, similar to him
technology is
next is ATFT technology
Has become advanced technology
Tumbler flow induction technology and then this technology as well
Hero Company has patented it, and Hero Company is its higher-up.
Sisi uses this ATFT technology in her bikes.
Let me also tell you, in simple terms, about this ATFT technology
This is an improved version of ASFS technology from Hero.
Yes, and with this technology, Hero Company has set this target.
is that the air and petrol which are mixing together
meaning that a better improvement mixture could be achieved and its
The intake port has been slightly modified.
What happens is due to the fact that when air and petrol
When entering the engine, a tumble flow is created there.
And due to this tumble flow, the engine's combustion chamber
Inside it there is a turbulent cell, and due to that turbulence
The bike with more cc engine that has air and petrol
We get better mixed and achieve the same result
Better mileage, better performance, better power output
Next is i3s Technology, fully firm now.
Idol Start Stop System,
The Hero Company has also patented this.
And often, Hero Company's mid-range bikes,
You will see this there.
And at the same time, Hero Company has targeted better performance on lower cc bikes.
Mileage can be obtained, and the system works in such a way that when the bike is idling,
It is in position, meaning the situation is such that the bike's engine is started, and the gear that is there is the one.
It's in the uterine.
And the throat was not taken at all, just
The bike is parked, so at that time this technology is
Because the bike's engine has shut off by itself
It goes closed, therefore it happens because here there is one
The Mini I3S unit is, and its function is to monitor the throttle position.
Keep feeling its position and keep feeling the gear's position and
As soon as this Mini I-3 unit realizes that the throttle is
It's big, and the bike is in neutral, so just that.
What does it do that the Spark plug goes into the Spark when it comes
The current is flowing; turn off the supply of that current.
It shuts off, and then our engine also turns off.
And just like we press the clutch, after that the bike
It's an engine; once it starts, it performs exceptionally well.
Technology is here, and its target is improving mileage.
Next is HET Technology, full form being Honda Eco Technology.
And it has been developed and patented by Honda Company, Honda
You will come across HET Technology in the company's two-wheelers.
Friends, the target for this one is also to improve mileage.
to reduce power loss, increase power output, and
Let me also tell you that all the companies there are one
The difference in technology between the two is only in the 19-20 range.
All companies do is make slight changes and then patent them.
She used to give it a brand name, a very good one.
Then she sells her cars; what has she done here as well?
It has been said that in our intake port, there is a slight slit.
Changes have been made, which cause what happens to be the case that which
were now and the mixture of Proct and this
Along with the laminar flow, turbulent flow is also created.
is due to which there is an excessive amount inside the engine's cylinder
Turbulence is created, due to which the air and
Air and petrol mix in a certain way.
and mixes better and more thoroughly, so that
Water also gets into the engine's cylinder due to this reason.
Better mileage is achieved, along with better torque, better
Power output also improves efficiency, and that is ours.
Petrol is not even waste, for which reason the
Our engine's exhaust is from there, the exhaust gases
The amount of smoke and pollution gases present
Next is Blue Core Technology of
This technology has been developed by Yamaha Corporation.
Patented and used in Yamaha company's two-wheelers
The first thing you notice about this technology is its appearance.
Here too, better fuel efficiency and improved air and petrol consumption.
Use the same drum flow system used for mixing.
Moreover, offset cylinders are also used here.
That is, the cylinder located from the center of the crankshaft
is slightly offset, which causes the cylinder to
The side thrust above them from the wall feels less intense.
is, and due to this, the mechanical loss, which is the power loss,
It decreases, resulting in better fuel efficiency.
It becomes visible here as well
The cylinder of aluminum as well
is used so that the
The cooling rate is higher.
And the cylinders of the engine which
The combustion chamber is faster.
Could get cold
Next is SEP Technology, full form achieved, Suzuki ECO Performance,
This technology has been developed by Suzuki Company.
Patented, and the bikes from Suzuki Company
There, you'll come across this technology.
Now, the technology in question once again is Honda's HET technology and Yamaha's.
It is closely related to Blue Core Technology.
Here, Suzuki has done this: the rate of combustion
To increase it, to improve it, he put it into a cylinder of 4
Uses a valve, along with friction here.
What does Suzuki Company do to reduce losses?
that the piston and the cylinder wall
The friction between you should decrease, so that
Uses printed ones that are pistons
The intake valve we have, which is the exhaust
There's also a slight design change in the valve there.
has been done, and along with it, the rock arm as well
Changed it, and currently it's the roller rocker arm.
You want a detailed video, you want the complete video,
Please definitely let me know by commenting, along with your
Which technology has been used in the two-wheeler?
Please also let me know via comment.
I hope the information shown in this video is helpful to you.