Case Packing Motor Oil with FANUC M 710iC 50H TransAutomation Technologies Inc
AI Generated·May contain errors
Video Summary
AI GeneratedCMJ Brothers Inc. partnered with Trans Automation Technologies to implement a high-speed robotic case-packing system for motor oil bottles. Utilizing a Fanuc M710iC50H robot, the system efficiently handles both quart and gallon bottles, overcoming facility space constraints and replacing hazardous manual labor with a flexible, automated solution.
Comments are disabled for this video.
CMJ Brothers Inc., a motor oil manufacturer in Paramount, California, built a new filling line
to produce quart bottles up to 160 per minute and gallon bottles up to 60 per minute. With limited
space in the facility, installing a traditional drop packer was a challenging option. CMJ went
to the experts at Fanuc America Authorized System Integrator Trans Automation Technologies for an
alternative robotic solution. The robot cell needed to be capable of case-packing both the
quart size and gallon size bottles, so Trans Automation Technologies developed two end-of-arm
tools that rest in a stationary tool fixture and are accessible by the Fanuc robot. The two
end-of-arm tools were designed and built with ease of changeover in mind, employing a bayonet-style
connector with quick-release clamping mechanism. End-of-arm tool changeover for this system
requires minimal effort from a technician to secure the clamp and connect compressed air
and control power. Filled motor oil bottles are inducted into the robotic case packer
by dividing the inbound product stream equally into four parallel conveyor lanes.
The robot selected for this case-packing cell is Fanuc's M710iC50H 5-axis articulated robot.
Engineered for extremely high speed, application flexibility, and reliability, the Fanuc M710iC
series delivers repeatable precision and unparalleled performance. The robot end-of-arm
tool for the quart bottles uses 12 individual vacuum cups fixed in a 3x4 pattern for picking
the bottles by the top of the bottle body, not the cap. The vacuum mechanism then retracts,
lifting the bottles into the metal frame for stability while in motion. At full production
speed of 160 bottles per minute, the Fanuc M710iC50H robot is performing 14 cycles per minute.
When the system needs to change over from quart to gallon-sized bottles, the robot's tool change
program is selected by the operator. Then, the Fanuc M710iC50H robot moves to the tool stand
and deposits the quart tool into its storage position on the fixture. The robot pauses while
the operator enters a cell, releases the clamp device, and removes the compressed air and
electrical connectors. The robot tool change cycle is restarted and the robot automatically
extracts the bayonet mount, then moves to the gallon fixture and reinserts the bayonet.
The operator closes the clamp, attaches the air and electrical connectors, and then presses start
on the robot pendant. The entire tool changeover process takes less than five minutes and requires
no tools. Gallon case packing requires the oil bottles to be picked up by the handle,
three bottles per pick. The handles are clamped with a gripper device, then retract upward into
the tool for stability and travel. CMJ has two case sizes for the gallon bottles, a three-gallon
case and a six-gallon case. The six-gallon case shown here requires two robot cycles to achieve
a full case. With this intuitive and efficient robotic system, Trans Automation Technologies
was able to meet and exceed CMJ Brothers' automation goals. Not only were they able to
develop a robotic case packing solution that would meet the high throughput rates required
for the quart bottles, but also capable of handling the heavy weight of the gallon bottles,
all while eliminating health and safety hazards posed by performing this difficult,
repetitive task with manual labor. To learn more about FANUC America Authorized System Integrator
Trans Automation Technologies, please visit transautotech.com.

