Songs: Desert Dew - Alec Slayne Waltzer - Dye O Striwal - Pulsed Night Vibes - Moon Craters Inspir8ion - Pulsed Papaya Island - Dye O Only on the Surface - David Celeste
Thank you to my patreon supporters: Adam Flohr, Henning Basma, Hank Green, William Leu, Tristan Edwards, Ian Dundore, John & Becki Johnston. Nevin Spoljaric, Jason Clark, Thomas Barth, Johnny MacDonald, Stephen Foland, Alfred Holzheu, Abdulrahman Abdulaziz Binghaith, Brent Higgins, Dexter Appleberry, Alex Pavek, Marko Hirsch, Mikkel Johansen, Hibiyi Mori. Viktor Józsa, Ron Hochsprung
AI Generated·May contain errors
It's hard to explain the engineering marvel that is the SR-71 Blackbird.
A long range plane capable of flying 26km above the surface of the planet.
So high that the pilots could see the curvature of the planet
and the inky black of space from their cockpits.
It flew so fast that the engineers had to develop entirely new materials
and designs to mitigate and dissipate the heat generated from aerodynamic friction.
Entirely unique engines were needed to function from zero all the way up to Mach 3.2,
dealing with the myriad of problems like cooling,
fuel efficiency and supersonic shockwaves interfering with airflow.
A plane so advanced that when it detected a surface to air missile
it's response was simply to change course and speed up.
Even though the missiles had a higher top speed,
they couldn't achieve the range and high altitude manoeuvrability the Blackbird could.
This allowed the SR-71 to run hundreds of missions through Vietnam,
North Korea and Iraq without ever losing an aircraft to enemy fire, despite multiple attempts.
The entire plane was built around the propulsion system,
which alone was a miracle of engineering design.
For one, no turbine driven jet engine can operate with supersonic flow at it's inlet.
Yet, this plane was powered by the Pratt & Whitney J58 turbojet engine.
But get this, off the shelf these engines could only provide
17.6% of the thrust required for Mach 3.2 flight.
A speed which the SR-71 could cruise at for extended periods of time.
How on earth did it manage that?
In order to achieve those kinds of speeds, a ramjet is typically needed.
A ramjet, as you can probably guess from the name, relies on ram pressure to operate.
Ram pressure is simply the pressure that occurs as a plane rams itself through the air.
So, as the engine moves through the sky, it funnels this high pressure air inside.
Before entering the combustion chamber, the supersonic airflow must be first slowed down.
This basically acts like the compressor stage of a normal jet engine,
elevating the air pressure before it enters the combustion chamber.
Once the air enters the combustion chamber, it is mixed with fuel and ignited.
It expands and accelerates once again out of the exit nozzle.
With no moving parts, this type of engine is capable of flying at speeds far greater
than a typical turbine driven engine, but it cannot start from zero.
It needs forward movement in order to achieve the correct compression of air
in the combustion chamber.
So, they are either dropped from a conventional plane,
have a secondary propulsion system, or are a hybrid of a conventional jet engine
and a ramjet, which is precisely what the SR-71 used.
The turbojet J58 engine of the SR-71 is nestled inside the nacelle here.
In front and around the J58 is a complicated system of airflow management.
These control mechanisms allow the propulsion system to transition
from a primarily turbojet engine to a ramjet engine in mid-flight.
First, the inlet spike.
It is capable of moving forward and back by 0.66 meters.
This adjusts the inlet and throat area, which controls the airflow entering the engine.
It also keeps the position of the normal shockwave at its ideal position
between the inlet throat and the compressor.
This is the most efficient position for the shockwave,
as it minimizes the energy lost due to drag as air flows over the shockwave.
The inlet spike stays in the forward position until Mach 1.6.
After this point, it begins to move backwards by 41 millimeters
for every 0.1 increase in Mach number.
Keeping the shockwave in its ideal position.
The inlet spike contains perforations which connect to the outside of the nacelle through ducts.
Initially, the airflow will come from the outside in
to provide additional airflow to the turbojet engines,
but once the plane hits about Mach 0.5 this airflow reverses.
As the plane speeds up, the inlet spike develops a significant boundary layer of air.
A boundary layer is a layer of very slow moving air that clings to the surface of objects.
By bleeding this layer of slow moving air off the inlet spike,
it frees up a greater area of the inlet area for high energy,
fast moving air, and thus improves efficiency.
Around the engine there is a bypass area,
which takes air from the inlet and bypasses it around the J58 engine.
This air was used to cool the J58,
which again improved engine efficiency and allowed the plane to fly faster.
After the air passes the engine, it rejoins the airflow just after the engine afterburner,
adding additional thrust as more oxygen becomes available for combustion
and increases the pressure through the ejector nozzle.
Air got into this bypass area in a number of ways.
There was a shock trap, otherwise known as the cowl bleed,
located here, which again helped minimize boundary layer growth.
There were suck-in doors, located here, which only opened from Mach 0 to Mach 0.5,
to add additional air to the bypass for engine cooling.
Air from the aft bypass doors, located just before the J58 engine,
also fed into the bypass. These together with the forward bypass doors,
which vented to the atmosphere, were used to control the pressure level
in the inlet at the optimum level. If it was getting too high, a pressure sensor
would trigger the forward bypass doors to open allowing more air to exit the inlet,
while the aft bypass doors were controlled by the pilot.
These doors played a critical role in maintaining the position of the normal shock wave.
If this was mismanaged, the engine would lose control of the normal shock wave
and may even spit it out of the intake, resulting in a sudden power loss called an
un-start, which would cause the plane to violently yaw in the direction of the faulty engine.
If this happened, the forward bypass doors would open fully and the spike would move to
the forward position to reduce back pressure and get the shock wave back into its normal position.
Besides this bypass area that took air from the inlet and dumped it into the ejector,
there were also six bypass ducts that took air from the compressor and dumped it directly into
the afterburner. These ducts were the primary mechanism that transformed the engine from a
turbojet into a ramjet. Afterburners are great, they significantly add to thrust without needing
a whole lot of additional weight. They basically just inject fuel into the exhaust of the jet
engine and ignite it with whatever oxygen is left to provide additional expansion and therefore
thrust, but they are really inefficient. However, as the speed increases they are the only feasible
way to generate thrust and they do gain efficiency thanks to the forward motion providing the
compression of air needed to run them, instead of the turbine needing to be powered to turn
the compressor stage. The crazy thing about the SR-71 is that the engineers could have eeked out
more thrust from this engine to increase the top speed even more. Ramjets can go up to Mach 5,
so why did they stop at 3.2? Would they have run out of fuel?
Fuel efficiency in terms of cost doesn't mean a whole lot to a military plane like this.
The military doesn't care about cost, but the more fuel you carry the heavier and bigger the plane
gets, increasing the fuel it uses. There is a break even point and the plane's range will be
limited, but the engineers did manage to fill the plane up with an astounding amount of fuel
with some clever engineering. The plane was strictly a surveillance plane, so no internal
volume was used for weapons, freeing up space for fuel. You have probably heard that the SR-71
leaks fuel on the runway because there were gaps in the fuselage, but that's a simple fact that
ignores much of the engineering that caused it. The SR-71 used something called a total
wet wing fuel tank system, which meant that the fuel was not contained within a separate fuel
bladder. This was a weight saving measure. Separate metal fuel tanks would add too much weight,
and lighter plastic ones would melt from the intense heat generated from the aerodynamic
friction. So the fuel was contained by the skin of the plane itself. The engineers applied sealant
to every gap the fuel could possibly come out of, but because the titanium skin of the plane
expanded and contracted with every flight, it gradually deteriorated over time, allowing the
fuel to leak out. Because of this, the SR-71 had to regularly go into maintenance and have sealant
reapplied, but it usually came back still leaking, just not quite as much. The number of man hours
required to reduce it to zero was simply too great to fit it between flights, so they just had an
allowable fuel leak limit, which looked like this. This plane, like a rocket, was mostly fuel.
It's dry weight, depending on sensor payload, was between 25 and 27 tonnes. It's wet weight
was between 61 and 63 tonnes, making it, by weight, 59% fuel to feed those hungry engines.
Even then, without the ability to refuel in the air, this plane would have had terrible range
for what was supposed to be a long range spy plane. Range varied greatly. For example,
the engines became significantly less efficient when the outside temperature was higher.
A fully loaded SR-71 could expect to burn nearly 13 metric tonnes of fuel accelerating from Mach
1.25 at 30,000 feet to Mach 3 at 70,000 feet, if the outside temperature was 10 degrees Celsius
above standard. That is 36% of it's fuel capacity. If it was 10 degrees below standard, the fuel burn
nearly halved to 7.2 tonnes. And of course, the range was severely affected by their speed
and use of the afterburner. But on average, the SR-71 had a range of about 5200 kilometres,
about enough for a one way trip from New York to London. Not terribly useful. The US was not
going to be landing at their target to hand over a top secret plane to the enemy. However,
with aerial refuelling the plane could stay in the air more or less indefinitely provided there
was no mechanical issues. Really, the range was entirely determined by the pilots.
The longest operational sortie occurred in 1987 when the US flew the SR-71 from Okinawa
to observe developments in the Iran-Iraq war. This mission lasted 11.2 hours and likely required at
least 5 aerial refuellings along the way. So, if it wasn't the fuel or engines that
limited the SR-71's top speed, what did? At Mach 3.2 the nose of the SR-71
reached 300 degrees Celsius, while the engine nacelles could reach 306 at the front and 649
at the back. This is what truly limited the top speed of the SR-71. Without careful material
selection and design, the plane would simply overheat and fail. Even the fuel needed to be
specially formulated to get around these overheating issues. It was a specially formulated
fuel called JP-7, which has very low volatility and a high flashpoint. This was partially needed
because the fuel leaked on the runway and they needed a fuel that wouldn't ignite or easily
evaporate and make the ground crew ill. But mostly they needed a fuel that wouldn't vaporize
in the tanks and cause fuel feed and pressurization problems. The JP-7 fuel was so stable that it
actually doubled as a coolant for the entire plane. The fuel was pumped around the airframe
to cool critical components like the engine oil, hydraulic systems, and control electronics. When
fuel got too hot, it was simply sent to the engines for combustion. The fuel was so stable
that the plane actually needed to carry shots of triethylborane, a fuel that spontaneously
ignites in the presence of oxygen, to start the combustion cycle and after burners. The plane
usually only carried about 16 shots of this, so the pilots needed to manage them carefully,
particularly when slowing down for refueling and managing unstarts.
One huge question I had about the SR-71 was why it was painted black. Airliners are all
white to reflect heat and prevent the plane from overheating. If that applies to an airliner,
why not the SR-71? The SR-71's predecessors were unpainted, which saved weight and the areas
exposed to highest temperatures were painted black. Why was this? Surely black would absorb
more heat. The Concorde was once painted blue for a Pepsi ad campaign and had to lower it's speed
as it absorbed too much heat from the sun. However, the Concorde did not fly nearly as high
or as fast as the SR-71, and as the SR-71 rose the energy it absorbed from the sun dwindled in
comparison to the heat it gained from aerodynamic friction. For this we have to refer to something
called Kirchhoff's Rule of Radiation, which tells us that a good heat absorber, like a black object,
is also an equally effective heat emitter. So the black paint helped the SR-71 radiate heat away
from the plane, as it allowed the plane to radiate more heat than it gained from the radiation from
the sun. These efforts helped to keep the plane cool, but the structure of the plane still needed
to be incredibly heat stable. Aluminium is typically the material aircraft engineers turn
to. It was used for the Concorde, but as we saw it too had it's speed limited by heat to a much lower
Mach 2. Aluminium is cheap, has a great strength to weight ratio, and is easily machinable. Titanium,
the material that made up 93% of the SR-71, has only one of these properties. It's strength to
weight ratio, otherwise known as specific strength, is fantastic. But titanium is incredibly
expensive, despite it being the 7th most common metal in earth's crust. The refinement process
is incredibly long and requires expensive consumables. It's also not easily machinable,
as it readily reacts with air when welding or forging, becoming brittle. For these reasons
titanium is rarely used in structural parts in aviation. However, the real benefit of titanium
is it's ability to resist heat. The reasons for this are complex, that we will explore in depth
in future. However, the gist is that titanium alloys have incredibly strong bonding within
it's crystal lattice that resists heat from breaking them apart. Titanium alloys can resist
temperatures up to 600 degrees celsius before their atoms begin to diffuse and slide over each
other significantly, allowing it to retain much of it's strength even at 300 degrees. It has also
very low thermal expansion, so that expansion and contraction we mentioned earlier is minimized,
reducing the thermal stresses in the aircraft. But titanium has it's limits and for the SR-71
this was about 3.2 mach. Today engineers have made huge strides in material science.
The SR-71 used heat resistant composite materials as radar absorbing wedges between the structural
frame, located in these locations. The manufacturing techniques needed to make
composite materials as load bearing structures did not yet exist, but that has changed.
The SR-71's successor, the SR-72, which is now in development, will take advantage of new
high performance composites which will allow it to reach speeds up to Mach 6.
Many of it's engine components will likely be 3D printed titanium with cooling ducts printed
right into the part. It's range also won't be determined by pilots, as it will be an autonomous
drone. The insane engineering that makes planes like this possible fascinates me,
and I recently watched an excellent documentary on CuriosityStream that details the build process
for the world's largest airliner, the A380, chronicling the massive sheet metal cutting
machines that cut the aluminium skin, the vacuum moulds that form it, and the biggest oven in
Britain that locks the shape in place. This is just one step in the process,
and the documentary is nearly an hour long. This is just one of thousands of documentaries by
award winning filmmakers available on CuriosityStream right now, and a subscription costs
just $11.99 for an entire year. With that subscription you will get free access to Nebula,
the streaming service created by me and my fellow YouTube creators. Here you can watch my Logistics
of D-Day series that details the planning and technology that made D-Day possible.
The first episode is available for free on this channel if you'd like a taste of what you're
signing up for. By signing up to CuriosityStream and Nebula you are helping not just me, but the
entire educational community, as we work together to build a place where we can create unique
experimental series like Tom Scott's new game show, Money.
As always, thanks for watching and thank you to all my Patreon supporters.
If you'd like to see more from me, the links to my instagram, twitter,
subreddit and discord server are below.