Reviewing the integrated features of the Mathews Lift X 33 + Tuning

Keep Archery Fun
64 followers
Today we took a look at the new Mathews Lift X 33 with all of the integrated features. You can now buy a stand, sight, quiver, and stabilizer that have special mounting options built directly into the riser! We also looked at the new limb shift technology which makes it easier to tune your bow with no bow press required.
#archery #mathewsarchery #bowhunting
Hey, my name is Hunter and I'm here at the Archery World Lacey location.
They were kind enough to let us shoot the new Matthews Lift-X.
This is the new Lift-X 33 here with their whole integrated package.
Exo-engaged limb legs are really nice.
You can set the bow on the ground, keeping your cam out of the dirt with an arrow nock.
It just makes it really quick and easy to be able to set your bow down, shoot with it
at shoots or in a hunting scenario.
With this integrated quiver here, this is the Lowepro Detachable Quiver.
You're able to actually, one, shoot with it on the bow, but quick detach it with it and
it brings everything in a lot tighter to balance it up and then make it a stronger connection
point for the bow.
With the BridgeLock Stabilizer here, this is a 10-inch.
You can adjust and really customize your length and whatever balances and feels right for
you by sliding it in or out there to really find that perfect balance point and then also
be able to have a hard setting to be able to take it off, put it in the case, and put
it right back on.
So this is the HamSki Matthews Mounted Epsilon Rest.
Matthews Mounted just brings it even tighter to the bow here, so there's nothing hanging
out the side.
It just helps the bow balance even better.
And then this is the Matthews Edition UltraView BridgeLock Sight.
It's their brand new slider.
They have a lot more adjustments from their previous model here.
Really silky smooth slider adjustment.
This one is the three-pin model.
You're able to micro-adjust it for those precise measurements.
Again, with it being a BridgeLock Sight, it just helps with the balance and the strength
of the connection to the bow.
And we're going to take a couple shots, show you their new limb shift tuning technology.
All right, we're going to shoot it through paper, see what type of tear we get, and then
tune it with the limb shift technology.
So we got a tail right tear, or point left, which means we are going to shim those cams
to the left.
So I'm going to take this completely off here and set it to the side.
You can shoot without this in.
It's not going to hurt or damage the bow at all.
But now it's in the tune mode, so I can move this cam over a little bit, and just by following
the arrows here.
There's going to be hash lines on there to be able to show where I'm moving it.
We're going to move it one hash line and see what that does.
So we got pretty much a bullet hole here, just was a little sloppy in my shot, but fixed
a lot of that left and right.
I'm going to shoot one more just to confirm.
So after just a few shots, we were able to get a bullet hole with it, all without a bow
press.
This new limb shift technology from Matthews is pretty easy.
All you need is a set of Allens, and you can shim that cam left and right.
And let me rephrase that.
It's not shimming the cam, you're actually moving the limb there, which is going to affect
the tune.
So you can paper tune, bear shaft tune, and broadhead tune, all without a bow press.
Again, my name is Hunter with Archer Rolls here in our Lacey location, and thanks for
watching.
