I’ve tested a lot of barebow rests, but this one stands out. The Shotmaster Ben’s Rest has quickly become my go-to for performance, reliability, and simplicity. In this video, I walk through the unboxing, setup, tuning, and real-world performance after testing it on multiple setups. I’ll also explain how it solves common issues—like arrows bouncing on deep crawls—and how it stacks up against other popular rests.
Browse digital downloads, vanes, precision gear, and my archery books: 🌐 https://jakekaminski.com
⸻
📬 Send Mail or Gear
Jake Kaminski P.O. Box 742 Micanopy, FL 32667 Note: Items sent cannot be returned.
⸻
📩 Business Inquiries
Please email me using the address listed in the channel’s About section.
⸻
📖 Chapters
00:00 – Intro 01:15 – This Is Made for Stringwalkers 04:46 – Installation Tips 12:48 – What I Like & What I Don’t Like 15:38 – Final Thoughts
Got a review for you here on the channel. Today we're going to be checking out the Shotmaster
Ben's Rest that I really like and I think if you shoot barebow you're going to like it too.
So I bought this rest and put it on a couple of different barebows by now and I really really
like the way it actually works specifically for string walking and for barebow. I'm going to
unbox this and show you up close how the rest works, how to set it up, and some things that
I do like and don't like about it. And I just want to let you know that I did buy this with my own
money so this is an unbiased review of Ben's Aero Rest from Shotmasters. I know Ben Rogers.
I also know Tim Strickland as well. I know the both of them and I have shot on a few
world field teams with Ben Rogers and he's a great guy and I really actually like his rest a lot.
I'm going to show you the ins and outs and the rest here in a second but if you're interested
in grabbing one of these I will have links down in the description below to where you can grab
one of these Aero Rests and that is an affiliate link. If you click that link before you shop there
it genuinely helps this channel out and I can't thank those that click those links before you shop
there enough because that's what helps support this channel. So with all that being said let's
get into opening this thing up and we'll cover a few different things about the rest and I'll show
you how I set it up on my bow because it was a little tricky the first time I set it up because
frankly the instructions are lacking a little bit and they're just not quite as descriptive
at least to the level that I would have hoped it to be. However I've got it figured out by now
and I'll show you the quick tricks on how to make it work and make it work well for your individual
setup. So the main thing about this rest is that it works kind of like a drop away in that it reduces
your crawl spread. If you're like me and you have a lower bare bow anchor or you're shooting high
draw weight with very lightweight arrows when you're shooting those close distance targets
you really got to crawl really deep down the string and when you do that it really induces
some weird dynamics into the actual arrow. The arrow itself even though you're shooting with
your fingers its first move doesn't actually move left and right where the archer's paradox starts
it actually bends up and down because of the depth of the actual crawl. It does happen
actually with all bare bow shots when you're string walking but it's really really magnified
when you crawl really deep and so what a drop away rest does is instead of the arrow bouncing
off of the rest and actually pushing down and then launching up off the rest when that happens
it requires you to crawl further and further down the string to compensate for that bounce
off the rest itself. The sniper drop away rest and things like that are designed to kind of clear out
of the way and move out of the way so that way you don't have that chance to bounce off the rest
and that's also why thin arrow rests don't work that are olympic style recurve oriented
because those wires such as on the Shibuya Ultima rest which is the best rest in the world for
recurve archery in my opinion the rest is so thin that the the wire is it will actually bend and
break off after not that long of a time when you have a very deep crawl. So you have to run a
heavier duty rest and that's where stuff like this AAE Free Fly Delete which is another rest I do
actually like a lot but the wire is very big and it's very stiff and so the the arrow literally
bounces off of it and makes your crawls get deeper and deeper. So instead of having a drop
away mechanism this rest the Ben's Arrow rest actually is kind of like a springy if you see
here it's almost as if it has the actual old school springy mechanism but for those of you that
don't know out there the old school springy rest is more of like a I believe it was popular popularized
in the bare bow compound division in the NFAA world and it's essentially a plunger because it's
a spring where the arrow pushes on the side and it also has a flexible wire itself it's all kind
of built into one so it takes kind of the springy rest and only turns it into a springy in the
vertical fashion up and down because your plunger still comes through here and so that's supporting
the left right of the arrow and then the rest itself is just supporting the vertical access and
because it is so thin and you have excess material wrapped around in a coil here on this actual piece
here it makes the effective length of it even longer and allows it to be quite flexible so it
moves somewhat out of the way as that first depression downwards is coming when you're
letting go of the string. Before I get into the pros and cons of this Ben's Arrow rest I'm going
to show you how to install it here on my Win&Win ATF DX so I'm going to take off my FreeFlight Elite
rest here and bolt on this Ben's Arrow rest and show you some things that you want to pay attention
to so that way you can speed up your setup process. So the rest comes with hardware as well as tools
which is nice not every rest comes with a bunch of allen wrenches although I do have dozens of
these allen keys by now so it's kind of useless to constantly get them you know but if you don't
have them yet you'll be happy to know that it's included in the actual rest. It's very simple to
bolt this thing on just like pretty much every other arrow rest that is a bolt-on arrow rest
you'll use the bolt that's supplied in the front plunger hole and then you'll actually slide your
plunger into the rear hole itself and basically what you want to do is make sure that the rest
is level as much as possible the actual overall portion of the actual rest itself such as this
piece here you can see how this part is level and square to the bow you can use the grip down here
as a reference the logo as a reference or the adjustable plunger height plate as a reference
point to see is that thing cocked up or up and down or is it level or not. The next thing you
want to do is you want to pay attention to where the wire rest would be touching your arrow as if
it was on the actual rest so there is some adjustment here in the slot to actually slide
it forward and back and you should in my opinion do your best to try to get the arrow to sit on the
rest exactly under the center of the plunger if it's really far behind or really far in front of
that mechanism like where the plunger is when you have up and down vertical variance it's going to
have a different impact like how much it goes up and how much it goes down compared to if you had
the same kind of influence left or right and for me I wish I had a little bit more adjustment in
this rest to actually slide it a little bit further forward because where that wire actually supports
the arrow is just a little bit too far back in my opinion but that's not the case for every setup
it's just sometimes depending on your actual bow geometry how it's built and things like that
you may run into an issue with the wire coming too close to the actual riser right here without
actually being able to support the arrow and being able to get it in enough out of the way
so the feathers don't catch it or the veins don't catch it on the way by. Now I've already got this
bow set up for big fat aluminum arrows and I'm just going to show you what you need to pay
attention to with this setup because it is the worst setup at least the worst case scenario that
you need to pay attention to in the issue of this rest but it's not really an issue it's more of a
feature it's just something you have to work around in order to set it up properly for yourself so
what I'm talking about here is this pay attention to the wire when I place this arrow on the wire
watch how much it goes down when I let it go see how much it sags down now when it's at
brace height here I can see if I look down this shaft like this I can see right now that my arrow
is right now in the actual center of the plunger because I've already adjusted this rest for
another bow but when I pull it back you have to pull it back like this really over exaggerate
your crawl and draw back as far as you can almost to your exact draw length and point it either at
a white wall at a light or something like that and then look and see and now I can see that my
arrow is actually literally off the top of the plunger and that is really what the main problem
is with this rest is that wire is so flexible when you're running heavy arrows this is a x20
or whatever is this this is an rx7 with 200 grain points in them they're actually cut very short
so they're on the fairly heavy weight end of the spectrum for an indoor arrow
and here at brace height the heavy point has a lot more lever to actually push that push that
rest down and it's pre-loading it too much so what you have to pay attention to is a few different
things and that's the orientation of the rest you'll see how right now the hook is kind of
headed slightly uphill which is actually what you want you don't want it level because if it's level
when it gets pre-loaded it starts to head downhill and then the arrow slides off the arrow rest
so you need to have it up ever so slightly the way you do that is pretty simple actually
you have an allen wrench set screw in the back here right to actually tighten this uh this bar
that goes through that section and then you have a set screw that is up here that holds the actual
rest wire onto that barrel and so what you can do is you basically tighten this thing up tight
here and then you use the allen wrench here as a lever let me uh turn this thing around
you use this thing as a lever to move that rest up and down like that if you don't do it this way
and you're trying to hold it still and tighten this set screw over time because this set screw
bites into this metal piece here this through barrel it will pitch slightly up slightly down
as you tighten the thing up so you got to tighten it up quite tight almost final tight basically
final tight for myself stick an allen wrench in here and then lever the thing up and down to get
the exact angle you'd like to see so right now it's actually headed quite level relatively speaking
it's ever so slightly uphill but i'm going to tweak it a little bit more uphill and then tighten
this set screw back up in the back just to make sure snug that thing up and then all of your
adjustments from this position with this slightly uphill angle needs to be done on this portion back
here on the back side this portion when you loosen it up the whole block slides up and down
and then that's ultimately how you set your vertical height of the arrow rest itself so you
got to get the angle up ever so slightly and then you adjust your height up and down with the map
this you know this slide i guess per se so what i want to do is make sure that at brace height
i let the arrow sit almost on the bottom half of the plunger the very bottom of the plunger possibly
at brace height so right now i'm at almost the very bottom of the plunger i'm not sure if i'm
going to be able to get it on camera i'll do my best here i'm not sure if you're able to see that
but right there the arrow is sitting basically on the bottom of the actual plunger itself what i'll
do is i'll verify again pointing at a white wall draw it back and now the arrow is sitting
maybe in the top third of the plunger just barely above center so it's good enough for
me because i can see that the arrow is not at risk of falling off the top or at the bottom
of the plunger it's kind of right in the middle or very near it doesn't have to be dead in the
center and i find it to not be super critical as far as actual fine tuning is concerned
exactly where the arrow is on the plunger as long as it's near the middle i find that to be more
than sufficient and actually slightly off center i find to be better than in the center because
then the plunger tip itself rotates ever so slightly every shot you take so you don't get
a definitive like half moon worn into the center of the plunger so really that's the main downfall
of this rest is that you have to make sure that you do this in the right sequence you've got to
get this wire slightly pointed uphill you then also have to make sure the actual in and out
is sufficient too far out and you risk the vein hitting this thing a lot on the way by
too far in and the arrow will fall off the rest and then from there you just move your
adjustment up and down to make sure that the arrow is near the center of the plunger when
you're at full draw not at brace height so this is really the limiting factor of this rest and
pretty much the only thing that i don't like about it once i figured out the order of operations
and how to do this more properly uh it just actually makes a whole lot of sense and i like
it a lot i wish there was a micro adjust mechanism or some sort of threaded mechanism to move the
block up and down it's just a little i don't know crude as far as the actual mechanism of movement
because it's easy to overshoot where you end up you know needing to be and so you kind of chase
your tail a little bit but the mechanism once it's tight i found that it hasn't moved on me
and it's totally fine it's a little bit on the bulky side and worst case sometimes my hand will
actually be hit by the actual rest just because it's so far behind the actual riser so it'll like
come up and kind of catch my hand in that portion right there so what i found is a little bit more
of a simple setup with this rest compared to say the sniper and it seems to be far more robust in
that it's just consistent i don't seem to have issues when i change crawls i don't see weird
huge jumps between gaps like i do on my free flight elite when my i'm crawling really really
deep it just seems to be a very happy medium in regards to a barebow specific rest because it's
got a little bit of give in fact it's got quite a bit of give um but it seems to be quite robust
and consistent and so it's kind of like blending the recurve world with those thin wires to the
barebow world needing a rest that moves out of the way when that first hit happens when it pushes
the arrow down onto the rest so outside of it not working with a clicker not really a problem
because it's a barebow rest uh i really really like it i like it a lot and it's definitely
currently my rest of choice as far as barebow is concerned indoor outdoor field you name it
it's what i really like running on my bows right now there are certain times where i'll run
different rests but that's when i'm using a clicker or doing other weird non-standard things with my
barebow so i'd say overall this is a huge upgrade from a very heavy fixed wire that doesn't move
out of the way in the vertical axis and i find it to also be an upgrade for things like this
sniper because it's great in concept but i find that especially with arrows like this the big
heavy indoor arrows with heavy points you really actually can't get the sniper to work properly
with these arrows because when the point is so heavy you have to make that magnet so resistant
to dropping so you don't bump it on the way up when you lift the bow because that you know lever
of the arrow itself is pushing down so hard on the rest but then when you actually shoot it it's
not soft enough to drop out of the way so you can't use the sniper in certain scenarios if you
have minimal crawl on big heavy indoor arrows you're just not inducing enough downward pressure
to make that thing drop and i've heard some issues with those over time especially in field archery
because of the variance of the pressure from different distances i was able to set mine up
with my x10 just fine however i think that this rest here kind of solves the issue with that
sniper drop away and it's absolutely something i would put just about on anybody's bare bow if
they're asking me what rest to go with so arrow rest reviews are a little more difficult to do
compared to a riser a set of limbs or things like that because i can't really tell you how it feels
because it's just an arrow rest it's just an accessory so please comment below and let me know
what you think about this basic format because it's quite basic in that i just tell you what i
think about the product tell you the pros and cons and show you how to set it up you know i'm just
genuinely looking for your feedback because i've got the gelo drop away or the gelo barebow rest
or whatever you want to call it i also have that to review and a few other things including some
plungers and some of those things it's not as complex as a riser and it's not so feedback
heavy so please like i said just comment below let me know what you think about this actual format
and if you liked it or not and if you are interested in grabbing one of these ben's arrow
rests please click that link down in the description below and if you are new here and this is the first
time you're seeing this channel please hit that subscription button and the notification bell down
below genuinely that helps the channel out and consider sharing these videos as well if you have
anybody that you know that has questions about any of the gear that i've reviewed on the channel
or any other technical questions that they have regarding archery i'm sure i've got a video for
that and it really helps this channel out if you share those videos with your friends
and i appreciate it very much