New Mathews LIFT X for Elk Season...

Defending with Past Crossbows
3 followers
1 Video ViewยทMar 8, 2026
New Mathews LIFT X for Elk Season...
Comments are disabled for this video.
I love the weight in here like to me yeah what do you think he aged they said in the teens
yeah but you might look at this bow at a glance and go there is nothing different well you would
be drastically wrong hi guys welcome to the public land hustle this thing's light this thing's fast
and this thing is super tunable this is the matthews 2025 bow i have yet to see it i called
up my good pal mfjj and i had him build this bow for me while i was out hunting and then my good
friend tyler brought it down because we're at elk camp well it's that time of year again this guy
needs his bow built killed a bull yesterday tyler josh helped me pack it out you can see that on
the public land hustle series right now you're watching this it's probably maybe it's november
i don't know but i'm about to look at it for the first time i don't know what it is i don't know
what i ordered let's check it out here we go hello welcome back to dan's youtube channel this is mfjj
here with podiumarcher.com building elk shape's newest bow well first things first welcome to
the matthews lift x i'm excited oh my gosh i can't ask anybody about this i can't talk to anybody
about this so i have no way to verify what's going on here other than a little bit of playing i've
done but you might look at this bow at a glance and go there is nothing different well you would
be drastically wrong somebody actually figured out how to get around bowtech's wheeling system
well it looks like mfjj put gas strings on it set the peep height to my liking 3 16th
as far as the bow goes look at that finish the name of the bow is the lift x they got an x logo
right there uh ata is looks like it's 29 and a half mfjj put a black gold on it three pin slider
mx2 from qad elk shape side plates looks like the same cam
oh looks like we have some sort of cam lean adjustment the orientation of the cams you can
manipulate here probably without a press which would eliminate the top hat stuff
now i pulled this apart i don't like i said i don't have accurate information so
i'm just assuming how this works but i took this screw out and there's a wrench under here in fact
just let me grab it i'll show you so this screw is covering up a driver that moves the limb left
and right not the cam so that's how you actually get around something in that patent and it's
ingenious because i guarantee it does the same thing as far as moving the the wheeling to where
you're no longer using a top hat anymore to adjust your tune but i don't know how well you can see
that in there if i can get focused or not but there is a driver there if you want to watch this
i'll try to hold steady decrease increase so that is going to change your wheeling
and that my people is an incredibly clever way to make the same thing happen again i'm not speaking
from facts i am not read up i have no information and you're watching this and you probably have
access to it all this is just first impression so it's time to shoot it and see if it's close
well the time will tell on how well this system holds up it looks pretty bomb proof it looks
really simple uh the only thing i couldn't figure out was how to get the uh axle out when you tried
to change it out so i couldn't tell you that for right now but this does appear to be the only
change to this boat i could be wrong but looked it over really thoroughly can't find anything
different in fact i've got a a lift right here that we can compare it to it doesn't look like
there's more cuts in the riser it doesn't look like any major changes this is a cool new color
i didn't get the name we'll check one of the packages here but it doesn't look like they
changed anything else and so they might get some criticism for that but let's establish one thing
it changed a ton last year like an absolute ton so i wouldn't criticize that one and
the one real complaint i had about that is it's still hard to change the top hat system a bit
and it was kind of coarse well this completely eliminates that i almost guarantee it we haven't
tried to tune it yet but we will for you when we build this thing up but this little add-on do
dad feature etc will probably work just like boat tech system i think which is the easiest system to
adjust so hey hats off to matthews way to get around it and make the same thing happen i assume
but we'll find out it's been a good ride
not bad well let's see how mfj did uh oh i do not know how much more expensive it is but i was told
it's not very much more like 30 50 bucks maybe something like that don't hold me to that because
once again this is before time and we can't find out anything so but let's see what we're going to
bolt on dan's new lift x 29 and a half 80 pound 27 inch with bottom land lens and what they call
it shale this color is called shale and it does have a texture to it that's noticeable and honestly
looks pretty badass so let's see what we're going to bolt on it ultra rest integrate mx2 black gold
pro site three pin version bridge lock dovetail compatible low profile gripper 10 degree down
mountain series elk shape hunter 15 inch front bar bridge lock adjustable v bar
the elk hunter white two-piece grips peep sight an x10 parallel pro all right so first things
first before you bolt on the aero rest if you're going to change the grip out i would do that first
just because everything gets in the way of it if you don't and these are just stuck on they're stuck
on really good they are just stuck on so the only credit part is you kind of got to get the cruddy
buddies off of it depending on which grip you're going to put on here you're supposed to take the
adhesive off the uh i know the the ultra view ones they say you you don't want any adhesive
on them period and then the shadow creek ones which is what dan uses uh has its own little
adhesive pieces you put on it so along with looks like he left me some grip tape so it's a little
bit of a harder texture back here i'm assuming because that was sitting in the pile too and i
tried calling him and he's out of service so i'm assuming he must be in a dirty hole somewhere
that makes a little narrower channel on our throat and then a little bit more of an edge there
and i'm assuming since this is in here this is what he wants on there so round up some scissors
and put this down okay so this looks a bit wide that's i'm going to probably cut it right down
the middle here okay grip installed now let's throw that aero rest on here that's where you're
supposed to start from and your little cover plate covers up all that little small stuff
throw it in the press and set that through there and that part will be good until we have to tune
it i'm going to put some of this other stuff on here and then traditionally when you move
this on you got to move the side all the way to the left or sorry all the way to the right
because the delta is mounted so much farther to the left than a traditional mount so you're
going to probably go right here i want to jinx myself but i've only dropped one thing so far
that's kind of an inside joke for dods dods likes to make fun of how many times i drop
something while i'm doing this these little indents in this dovetail i'm sure you can
see them on film these little bumps and just want to make sure you're in one when you tighten it
down before you start trying to level everything grab your little two-way level gen two clamp it
something flat and drive that to where it's level rotate the bow a little bit toward that level
so easy and this is not level so we're going to loosen this bottom one
and just pop this one loose but not like sloppy and then you have your driver screw right here
for moving that till it reads level okay so once you know that rail matches that you can take this
off and now you only have to set that bugger and once again this is my only real gripe about
black golds and while they need to probably upgrade from what they've been doing here on
the dovetail moving system these are a little finicky to get this lined up and we will draw
this sucker back after i get a string loop on it and set the third axis as well as set the wheel
lane and then we'll run her through paper and when we're done with all that we'll tie the peeping
on these shorter axle to axle bows especially longer draw lengths you gotta leave a pretty
good gap in your string loop soft knots or they will just compress over themselves all right
that's just an ip4 so we'll go off of that it's not that different than the lighted knock width
now that serving width is perfect nice nice so i'll probably come down just a little bit from
that maybe one serving width closer but still got to leave a little bit of gap so yeah this
that's about the gap you want for a shorter axle to axle bow you could probably make that
a little smaller on a longer axle to axle bow but this is a 29.5 so he shouldn't experience
real knock pinch at the draw length he's shooting it at but if you shot this bow near its max you'd
probably experience it a lot and it's just such a compressed angle it's just so steep right so
try to hold those two pieces together square without a pinch in the knot can be really hard
and if you've ever experienced knock pinch or haven't what it is is these two pieces coming
together and pushing on that arrow to where it wants to float when you draw it back so if you
ever draw on your bow back and your arrow looks like it's kind of raising up out of the rest and
then coming back down you probably have a knock pinch and you probably ought to look at how much
gap there is a lot of fun timing about two twists there the bottom one so i'll go ahead all the way
back it's not the other stuff yeah i need a little little twisty in that one so what do we
want to check first here let's we can do i just grab laser yeah so let's see if our cams are
pointed at each other you you're rolling right okay so the only negative with this is that cable
is going to be right in the way probably and it is dang it so i'm going to pull that out so you
can see this i would probably just eyeball it otherwise where's my black allen wrench perfect
thank you all right so in order to make sure these are pointed perfectly at each other which since
we have this system where we can move them we want to take advantage of that so we're going to take
this string stop out so when we shine the laser on it's pointing directly at the cam and we know
it's pointing directly at the cam we're going to put that back in don't let me forget all right in
fact let's go ahead and we are it's our first time actually trying to do this i'm pretty sure we can
move these at draw but i hope i'm not screwing something up right now but i can move the botex
at draw so i'm moving i can i'm assuming i can move these at draw as well don't lose it so we're
going to shine this laser on this cam and see how close to pointed at that cam it is it's really
close but it's a little bit to the inside here if you can see that can you see that jason okay so
we're going to try to move it to where it's actually pointed at that cam and now we find out
if we can actually do this or not feeling kind of cowboy at the moment see which way goes better here
it feels like i can move it okay why don't we point it out here better quite i got that feeling
something might just blow up i think i'm going the wrong way you can go the other direction here
oh i think that did it hang on let's see there you go all right so that one's pointed at that
now i can carefully take that back put that screw back in so you don't forget it and then we'll try
the other one as well now i'm assuming that when you screw this back in it locks it because it
points that lock on here so we're going to assume that's locks it in place so it can't move
take this one out they do call this limb shift technology which i was i was told it was patented
now so here we go another way to move a wheel around all right oh that one's pretty darn close
it's on the other side just a little bit right or was that they were both on that side weren't they
yeah okay so when we moved that out so i'm gonna try where's close again okay okay so these cams
are both even now with each other so when tuning this if you have to change a left and a right
you move them in or out equally so whatever you do the bottom one do the top one and i imagine
this does feel on the course side of movement it seems like a little bit of turn moves it quite a
bit so either move them in or out equally based off of trying to increase or decrease lean but
whatever you do do it the same on both all right so we got that set we can set our third axis now
let's find our flat spot here to bolt it onto and take a look at our bubble and see what it looks
like another little added feature to this little draw board system i made all right let's take a
look here move that to where it reads level which you can't read from where you're at very well
it's almost well that's not perfect yeah it's perfect so no touchy that is ideal now everyone's
going to hold a bow a little different so you are going to get a little bit of variance on that but
it's basically where you'd start from and then check and see what happens from there so we got
our wheels lasered we got our third axis set we just need to adjust the timing and can put it
through paper and see what we get okay so we've got the stabilizers on got the quiver on we have
our wheel lean straight i ran down to the shop and grabbed a weiss choice because it's the closest
thing i have to dan's too simple that he's using i don't think i have a too simple on the wall at
the moment uh let's see what kind of hole we get here timing feels good wheels look good and
that's pretty close tiny bit point right which we can tweak with now that means we should be
moving the cams uh to the left so we're gonna try driving this system over a little bit
the only other little tidbit i don't know is if there's like a limiter in here or something
so i don't know if it like stops if you go too far but we are going to i think that's about as
far as it goes in it oh there we go okay whatever you do this one you got to do the bottom one so
i'll get this screwed on here drive the bottom one a little bit and see what we'll get there you go
it's like a pretty good hole there um i'm gonna wait till i hear from dan
then if i don't hear from i'll just tie it in but i'm pretty sure this is his p-pipe
we got a message in to him hopefully he'll get back to me this evening and i can tie that in
there and get the uh the speed off of his other bows sight tape because he's got an ultra view on
that and i can kind of cross reference the charts and get a tape on this bow for him and then send
it with tyler so he can still hunt with it in the second part of this season so this is the lift x
29.5 total bow build this thing's light this thing's fast and this thing is super tunable head
on down to your local shop and check one of these things out it's like just a little bit better than
the lift dress that knot up cut and burn good to go we're gonna shoot these iron will wide 125s
single bevel to the left i shot the new mexico bull with it 54 and a half for he went 40 yards
he died right in sight tried and true grim reaper micro hitties these are the pro easton x10 parallel
pro this one was built by adams precision it's got their wrap my veins the ae hybrid hp
elk hunter edition ip4 knock from ae podium two-piece titanium for four mil arrows and then
this is the arrow i shot the bull with i cleaned it off spun it it's good so we're going to try to
shoot these and field points once we confirm that the sight tape is doped it is windy as hell here
super annoying start out with the grim reaper iron will wide single bevel to the left
that is in a bullseye as well screw fill points right in the middle
