These retaining walls have been sitting unfinished for months. This video is about finally moving them forward.
In this build, I take a set of modular N scale retaining walls and push them past their clean, architectural beginnings into something older, heavier, and more lived-in. Using controlled solvent damage, layered paint, and weathering techniques, the concrete is distressed, eroded, and brought into the same dystopian world as the rest of the layout.
The walls are designed as removable sections so they can be worked on at the bench before being installed back into the scene. Along the way, I experiment with surface texture, exposed rebar, washes, and subtle tonal variation to break up the mass and give the concrete a sense of age and neglect.
*More Channel Info:* Welcome to N Scale Dystopia - A channel dedicated to documenting the build of a post-apocalyptic N Scale Model Railroad and Dioramas based on Union station in Toronto, Ontario, Canada.
If you found this video intriguing, consider subscribing for more content as I lean into creating more dystopian scale models. I'm figuring a lot of this out along the way, so it's always nice to have you join me on the journey and offer support, but more importantly, feedback! https://www.youtube.com/@NScaleDystopia?sub_confirmation=1
[music]
These retaining walls have been sitting
for months and today I want to move them
from this rough unfinished state to
something better. This design came about
because the deepest part of my layout is
4 ft deep and there's no way that I can
reach the back portion of the layout.
And earlier in the year, I shared my
solution for that reach problem, which
was to create a bunch of modular
retaining walls that I could move from
the layout to the workbench so I could
add my structures and do my detailing.
And now that that upper city platforms
in place, now is the right time to start
detailing these walls and melting
concrete.
[music]
This is the rough building block for
each of my retaining wall sections. It
is made out of laminated pieces of 1 and
1/2 in and 2in foam and it's been faced
with some laser cut 8 in bulsa plywood
with a few little details added using
laser cut Bristol board. And so we have
three different surface types,
styrofoam, the wood, and the paper. I
want to distress this and then I want to
unify it so it looks like it's all
concrete.
[music]
>> [music]
[music]
>> Heat. Heat. N.
[music]
[music]
[music]
>> [music]
>> Heat. Hey, Heat.
[music]
[music]
[music]
>> [music]
>> The basic roads and sidewalks are
installed. [music] And I have melted the
concrete. I took the goof off on a
sponge and just put a little bit across
the surface of the foam. Um, the solvent
does react, but it only eats so much
before it neutralizes and doesn't do any
more damage. I cut out a little bit of
aluminum screen and [music] press it
into those sort of solvent soaked spots
and it fused with the foam. Then I've
gone over this with a misting of Super
77. It seals the foam so that the spray
paint doesn't eat into it, but it also
gives it this sort of pebbly texture
which I think brings it all together.
And so really now the next step is to
paint it and weather it.
[music]
Heat. Heat.
Heat. Heat.
Heat. Heat. [music]
So, I am really happy with how this has
turned out so far. The paint has really
brought it together. And it's difficult
to tell that this is a combination of
Bristol board, laser cut plywood, and
styrofoam because that overspray of the
Super 77 has given everything a uniform
texture. And the different colors of
paint with the washes of alcohol and
India ink have blended it really well.
I've just added a bit of rickety chain
link fencing. I've added a little bit of
weathering to the rebar and the base and
the pillars and such using a combination
of acrylic inks and again some diluted
India ink with isopropyl alcohol. I
would say in terms of painting and
finishing, [music] this is done. The
next step is I want to take it a little
bit further and look at adding some
ripped up posters and some vines.
[music]
Hey. Hey. Hey.
[music]
[music]
[music]
[music]
>> [music]
[music]
[music]
[music]
[music]
>> Heat.
>> [music]
[music]
[music]
[music]
>> Heat.
[music]
[music]
Heat.
[music]
>> [music]