Adding Pockets to a Victorian Skirt

Victorian Threads
4 followers
2 Video Views·Apr 13, 2026
Learn how to add functional, historically inspired pockets to a Victorian skirt in this detailed sewing tutorial. Whether you're working on a period-accurate costume or simply want to incorporate hidden pockets into your garments, this step-by-step guide walks you through the entire process.
From selecting the right fabric and placement to stitching techniques that blend seamlessly with the skirt’s design, this video balances practicality with historical charm. Perfect for sewists, historical fashion enthusiasts, and anyone who appreciates the beauty of Victorian craftsmanship—with a modern touch of convenience.
Everyone, if you've been following along so far, you'll know that I'm making an entire 1892 outfit
from undergarments out, mostly hand-knit and some hand-sewn. And when I was making the skirt,
one of the things that you all always were commenting to me and I was trying to remind
myself to do was to add pockets to my skirt. I don't know how exactly historically accurate
pockets like this would be, so if you know anything more, please do leave me some information
about that. I am super interested. If you watch some of the other historical dress makers on
YouTube, you'll know that Morgan Donner recently added pockets to all of her skirts and dresses in
her closet, and I'll leave a link down below to that if you're interested. But Bernadette Banner
also did adding pockets to her skirt, and I'll leave a link down to the video below for that
one as well because that's the one that I'm actually going to follow to add some pockets
to my 1892 skirt. Oh, before we go any further, just in case you're wondering, in a lot of these
introductions I'm actually wearing articles of clothing that I hand-knit or crocheted myself,
so if you're interested, I'll leave the pattern for this particular sweater down below as well
as the yarn that I used. It's not a paid promotion or anything like that, I just really really enjoy
this particular sweater a lot and the yarn is so soft. It's Knit Picks Wonder Fluff held together
with a loft and it's really light but comfortable, so just in case you were wondering what I'm
wearing, I'll leave the links down below for you guys to look at. Let's go add some pockets to my
skirt. So this is the place where I would like to have the pockets following Bernadette Banner's
tutorial, I measured down from my waistband to about where I'd like my pocket to sit. She said
about eight and a half inches down and I found that for me that was also a pretty good measurement
of where I wanted my pocket opening to sit. Then it was time to draft my pocket. I began by
measuring the width of my hand in order to determine how wide the pocket opening should be
and then tracing around my hand as if it would sit in the pocket to make sure that I had enough
room to actually fit my hand, my whole hand, in my pocket. One of the items I wanted to be
absolutely sure would fit into this pocket was my phone, so I tested out putting my phone in
my pocket and I did find that it was maybe a little bit too shallow so I traced around the
phone edges to make it deeper to make it feel maybe a little bit more secure when the phone
was inside. I was feeling quite good about this particular draft so I gave my pattern piece quite
an ambitious name. It was then time to cut out the pockets themselves. I would have loved to use a
piece of fabric that was a little bit closer in color to my actual skirt. I actually do have some
skirt fabric left over but I still have to make the jacket and I think it's going to be a bit of
a tight squeeze so I just decided to use some white muslin that I had on hand. I drafted my
pocket pattern net so when I cut out the pocket I made sure to add approximately a half inch of
seam allowance around the entire piece. It wasn't exact but it was close enough and then I did the
whole process again to cut out my second pocket. I then measured eight and a half inches down from
the waistband at the side seam where I wanted to make the pocket opening. Then in order to determine
exactly how wide I wanted to make the opening I used the actual pocket draft to mark the distance
with of which I would have to actually seam rip back. I then turned the skirt inside out and
started ripping open the seam between the two marked pins and then a half an inch on either
side in order to allow myself room to sew in the pocket with the seam allowance. I then pinned the
right side of the pocket to the right side of my skirt fabric at the side seam before sewing it
together. Once both pocket sides were attached to the skirt side seam I then pinned the pockets to
each other and sewed that closed. I made sure to start about a half an inch back on the seam
that bit that I had ripped open before a little bit past my pin markings to make sure that the
pocket is nice and anchored in place. Of course I was nearly done sewing my second pocket together
when I realized that my lower bobbin had run out of thread. One of those moments where you stop to
think oh my goodness how long have I been sewing without any bottom thread. Thankfully it wasn't
too far. Winding the bobbin went pretty quickly and I was able to finish up this pocket. Now I was
ready to be quite excited by this pocket that I had put in and you can see here that I am very
happily able to fit my phone inside. Please pardon me not buttoning my skirt all the way in the back.
However I will say it was quite a tight fit. I had to struggle to get the phone in and out
as well as really fit my hand in all the way. Of course I sewed on both pockets before stopping
to think and maybe realize that the pocket pattern that I had drafted was not quite roomy enough.
So I went back to the drawing board. I used my existing pocket pattern in order to improve and
make the next iteration of my pocket a pattern piece. This one I made wider and longer with a
hand opening a little bit larger. For anyone else who's drafting their pockets for the first time
I might suggest that you make the mock-up first and maybe test out just one pocket before sewing
in both because it is quite the effort to undo everything before then re-sewing everything back
together. Now while it might not seem like the most dramatic difference you can see here that
my old pocket is a bit shorter and not quite as wide as the new larger pocket that I drafted
as my second iteration. I also pinned the white pocket right side to the wrong side of the seam
allowance this time because I did feel like it was very easy to see the white lining from the pocket
when I was wearing the skirt. I know this isn't the way that Bernadette says to do it in her
tutorial but I personally prefer the end results better and my blue skirt fabric really doesn't
fray all that easily and I had made sure that it wouldn't fray easily because I pinked it
so I was more comfortable doing it this way because I felt that it hid the pocket better
in the end result. Once again I then sewed each of the pocket sides to the seam that I had ripped
open and then sewed the pocket together including closing up that extra half inch gap at either side
of the pocket that I had done before and that finished adding the pockets to my skirt and as
you can see I am much happier with my second iteration of my pocket. It is far easier to put
my hand in and out and put objects in and out and I feel like it's also a little bit better hidden
because I do have quite a contrasting inner lining of the pocket. I am so happy that I'll
be able to store all sorts of things in my pocket while I'm wearing my 1892 outfit
and maybe you'll also think about adding some pockets to some skirts or dresses that you own
because it's actually easier than I thought it would be. However I do recommend maybe testing
out your first drafted pocket pattern before doing both and having to undo everything twice.
Anyway thank you all so much for watching. If you enjoyed this video feel free to give it a like.
If you want to see more historical knitting or sewing you can subscribe and I will see you all
next time.
