Granberg EZ Rail System Assembly | 15-Foot First-Cut Guide for Chainsaw Milling

A round log doesn’t give your chainsaw mill a flat place to ride. That’s where the Granberg EZ Rail System comes in. Today I’ll show you what’s in the kits and how three five-foot sections go together.
#GranbergEZRail #ChainsawMilling #AlaskanChainsawMill #FirstCutGuide #Granberg #DirtFarmerJay
How do you put together a 15-foot first-cut guide for a Granberg Alaskan chainsaw mill? In this episode, I assemble the Granberg EZ Rail System, lay out the hardware, and show how the G1090 EZ Rail Connector Kit joins the 10-foot and five-foot kits into one continuous guide.
Watch our complete Granberg chainsaw mill setup and accessories overview:
Why I Bought the Granberg Alaskan Mill Instead of a Bandsaw Mill
https://www.youtube.com/watch?v=x1DN9fzhq7k
WHY THE FIRST CUT MATTERS
When a log is lying on its side, the top is usually rounded, tapered, or uneven. The mill needs a straight, stable surface to ride on for that first pass. The EZ Rails provide that surface. Once the first cut leaves a flat face on the log, the mill can ride on that face for the next pass. That’s why the first cut matters so much when you’re milling slabs.
THE THREE GRANBERG KITS IN THIS EPISODE
• G1010 — 10-foot EZ Rail System, supplied in two five-foot sections
• G1085 — 5-foot EZ Rail System, which adds the third five-foot section
• G1090 — EZ Rail Connector Kit, which joins the 10-foot setup and the five-foot section for 15 feet of assembled guide rail
WHAT WE SHOW IN THE SHOP
I start by laying out the rails, crossmembers, and hardware so you can see what goes where. Then I assemble the rail sections and show how the G1090 connector hardware fits into the rails. If you’ve opened the boxes and wondered which pieces belong at the joint, you’ll get a close look at that part of the assembly.
One thing I like about the setup is that I can handle and transport the rails in five-foot sections, then connect them when I need the full length. If you already own the G1010 or G1085 and are looking to extend it, you can see how the two kits fit together before deciding what to order.
COMING UP IN THE FIELD
This episode takes us through the shop assembly. In a future episode, we’ll take the assembled guide out to a log and show the setup and first cut in the field. In the meantime, the overview video linked above shows where the EZ Rails fit into our larger milling setup, along with the Alaskan mill, winch, edging mill, and other accessories.
GRANBERG EZ RAIL SYSTEMS
https://www.granberg.com/ez-rail-systems/
Use promo code DFJAY at Granberg.com for 10% off your entire order.
If you’ve milled with a chainsaw, what do you use for your first-cut guide? Let us know in the comments.
Until next time, this is DirtFarmerJay. Just Do It Yourself!
