Routine riding mower maintenance starts with safe access beneath the deck. A purpose-built mower lift provides stable support for sharpening blades, replacing spindles, inspecting belts, and cleaning up accumulated grass, making every maintenance job faster, easier, and safer.
Servicing items under the deck, including routine inspections, is easier when the mower is securely supported rather than balanced on floor jacks, ramps, or makeshift blocking.
The MoJack ZR 350 Mower Lift is designed specifically for that job. Built from heavy-duty steel with solid fit and finish, it arrives essentially assembled, includes a clear operator's manual and hand crank, folds for compact storage, and weighs approximately 50 pounds. Selling for about $200, it costs less than many professional mower service visits and can quickly pay for itself if you perform your own maintenance.
The lift provides a 350-pound front-lifting capacity, raises the front of the mower up to 20 inches, and features adjustable wheel cradles that fit a wide range of riding lawn mowers by accommodating front-wheel widths from approximately 19 to 43½ inches. Once positioned, the front wheels are secured with the supplied wheel straps before lifting, providing a stable platform for servicing the underside of the deck.
One feature that significantly improves day-to-day use is replacing the supplied hand crank with a 3/8-inch-drive socket and a cordless drill. This simple enhancement dramatically reduces the time and effort required to raise and lower the mower while maintaining smooth, controlled operation.
Safety is one of the lift's strongest features. As the mower is raised, the Locking Bar automatically engages one of two locking positions, mechanically supporting the lift rather than depending solely on the lifting screw.
Before performing any maintenance, the operator's manual also recommends working only on a solid, level surface, setting the parking brake, removing the ignition key, securing both front wheels with the supplied straps, and placing wheel chocks behind the rear tires.
Following these simple precautions provides a stable and secure working environment whenever you're beneath the mower.
You'll see the MoJack ZR 350 being used to service a John Deere S240 riding mower, as well as what's included in the package, the operator's manual, adjusting the wheel cradle spacing, positioning the mower, securing the wheel straps, using the cordless drill enhancement, engaging the Locking Bar, and safely lowering the mower after maintenance is complete.
Overall, the MoJack ZR 350 is a thoughtfully engineered, well-built tool that makes routine mower maintenance faster, safer, and considerably more comfortable. Better access encourages more frequent blade sharpening, deck cleaning, belt inspections, and spindle maintenance, helping your mower cut better and last longer.
If you've found another mower lift that has served you well, I'd enjoy hearing about it in the comments below.
AI Generated·May contain errors
Video Summary
AI Generated
Dirt Farmer Jay reviews the MoJack ZR350 mower lift, a $200 tool from Tractor Supply Company designed to lift up to 350 lbs. The lift provides safe and convenient access to the underside of riding lawn equipment, featuring adjustable cradles and a manual or drill-powered lifting mechanism.
This is the MoJack ZR350 mower lift.
It'll lift 350 pounds.
Hi, I'm Dirt Farmer Jay from DirtFarmerJay.com.
If you're serious about maintaining
your riding lawn equipment,
and you wanna do it safely, securely, and conveniently,
you really need consider getting a mower lift.
I recently made this investment.
It cost me about right at $200.
I bought mine at Tractor Supply Company.
For that price point, I think the fit, finish,
and the duty rating on this is pretty doggone nice.
It came nicely packaged, minimal amount of assembly.
The only thing I really need to put together was the cradles
and those are fully adjustable with these pins right here.
So you can move those in and out.
So you're gonna adjust and put those
and set them to the width of your unit.
And so that your tractor can roll right up on it.
The tractor approaches from this side.
This is the operator side of the lift.
So the tractor will be sitting here about 20 inches higher.
Your lawnmower is what I'm saying,
giving you nice access to the underside of the deck.
It comes with this manual crank,
which fits right here in this 3-H drive square right there.
You can use this as a safety or backup,
but it's gonna invest in a little drive like this.
It's a 3-H drive.
This one's kind of tapered so it can come at an angle.
There's other ones that are just straight.
But what this is going to do by chucking it
in a cordless battery drill,
you can simply mount it in here
and use a cordless drill to speed this up.
But before you do, there's three safety things
that you need to take care of real quick.
Please don't overlook these.
They're for your safety
and to make sure your equipment's secure.
Number one, after you've strapped this in here,
you also need to set the parking brake on your lawnmower.
Number two, make sure the key's out of the ignition.
Nobody that's around or that accidentally starts up
the mower, who wants to do that?
And number three, always use chocks.
You can buy them pre-made, like you can see here,
that go behind the rear tires.
So as this is raised, the tractor doesn't have a tendency
to want to run away from you.
It's all secure, ready to go.
All right, we've got all that stowed.
It's ready to go.
We're now going to start raising this.
And I'm going to do this at moderate speed right here.
So as we go up, remember this is lifting up to 350 pounds.
So here we go.
We're now raising.
And I'm going to take it to maximum height
so you can get an idea of how high this would have been.
That's it right there.
So you can see the tire's that far off the distance
that you would have underneath it to work with.
There is a safety item here that you've got to know,
and it's this unit right here.
The manufacturer has implemented this locking bar.
So right now, if I try to lower this,
it's going to engage right there.
It will not let me lower it.
So what I'm going to do is just to try it,
I'm going to start to lower it,
and immediately it binds up.
It won't go anywhere.
The reason is it's right here.
So even if all this fails right here,
it can't come down because the locking bar
is holding this in place.
And then there's a secondary right there too.
So even in a partial, there's two places it's going to catch,
and that's wedged right now.
Using this, I was really pleased with it.
And by the way, for 200 bucks to fit and finish,
how it's put together, the weight, the durability,
all looks very impressive with this.
We think we're going to be very pleased,
especially for a price point of $200.
In the description down below,
there's a link there that shows you where you can get it.
No, I don't get a commission.
It's just for your convenience at Tractor Supply Company.
At the time of this filming, about $200.
Another thing that's really irritating
when you work on these or on using your lawnmower
is when the grass catcher keeps clogging up.
Check out this video where I show you
how to keep the grass catcher clean,
the exhaust chute, and all of that,
so you don't have to continually clean it out,
stop your mowing.
That little problem will go away.
I know you're going to like what you see.
Until the next time, this is Dirt Farmer Jay
with DirtFarmerJay.com.
Join this great addition to my service shop.