This One Quoting Mistake Could Cost Your Machine Shop Thousands

Machine & Design
2 followers
Nov 13, 2026
This video is brought to you by CloudNC.
How many times have you quoted a job, won the work, and THEN realized you missed a critical tolerance that could wipe out your profit?
AI Generated·May contain errors
When it comes to quoting, there
are two main things you need to keep in mind.
One, most quotes are won
or lost based on the time it takes you to actually get that quote
to the customer. And two, if you miss things on a quote,
you are going to end up in a world of hurt.
What's up guys, Ian Sandusky
from Lakewood Machine back here again for Practical Machinist.
And today we're going to be looking at something
that is very exciting from a company that you
already kind of know and have heard about.
So before we do, make sure you like, subscribe,
And turn on notifications below to make sure you never miss a video.
Let's get into it.
Okay, guys.
So as promised today, we are going to be diving into quoting.
Now, we win a lot of quotes based on the fact
that our main focus here at Lakewood Machine
and Tool is if you send us an RFQ,
as long as it's not like 50 line items and I need
to call up 30 different material vendors,
you are getting a quote back that same day.
That's how we win our quotes.
That's how we compete.
The problem with that is when you're trying
to be very quick at turning around quotes,
you can miss things very easily.
I can't tell you how many times in trying to make
sure we're maximizing speed,
I have missed a bubble that I think says plus or minus
five thou and it's plus or minus five tenths millimeters.
How many times I've missed, oh,
this coating, it doesn't say type two,
it says type three and the type three on this and so on and so
Missing those things are the things
that can turn a job that makes a high profit
into a job that actually costs you money.
Now, one thing that just came out, this is a brand new release.
You know them for their AI programming software, CAMAssist.
CloudNC has actually come out
with a brand new software called QuoteAgent.
This one's really interesting
because it does something that I haven't seen a lot before,
and that is actually go through the entire quote package
with you before you even press a button
to actually do anything with pricing
to help highlight what it thinks you should charge,
what it thinks might be an issue,
and give you a thorough breakdown of that. But anyways,
let's stop standing on circumstance.
Let's go take a peek at it. Okay, so what is QuoteAgent?
This is by CloudNC, the same guys that do CAMAssist
with the AI programming. So this is a
super AI enabled and empowered quoting system.
And one thing that makes it so effective that
I've seen so far in my messing about with it
and trying things out is that it uses the same
physics engine that CloudNC's CAMAssist does to program to quote.
So that same kind of realistic thing they developed
to do the AI programming
is doing the same thing when it comes to QuoteAgent.
So it's not just speculating.
It's not just throwing random times at things.
It's essentially running it through something similar
based on your machines and the way you set it up
to tell you what might the price be, what might be a concern,
what might you not have the equipment to do,
and everything that relates to that.
So my main screen looks like this.
This is QuoteAgent.
Runs right in a browser.
You can actually connect it to your email.
So as emails come in,
it will automatically process your RFQs.
Now there's two ways to use this.
You can use it that way
or you can use it just from popping up new RFQ.
I can forward my email to this.
You know, a single email if there's one I want to use.
And there's an AI-enabled version,
and there's also basically a manual version you can use.
One is the one that actually costs a very inexpensive amount of money.
Manual is actually free.
So you can hop on and try this out.
So let's say I wanted to do something here.
I want to pop up a new RFQ.
This is very drag and drop.
This is very intuitive.
So I actually worked up a couple of parts to do for this because
I can't show you a lot of the stuff we have for my customers.
So I came up and I tried to throw some things
at it that might trick it a little bit,
but the first part is fairly simple. So the first part that we have,
I'll just show you the PDF here, is a pretty simple block.
It's something we might use in
a fixture. You know, it's got a pocket as a through hole,
it has counterbores.
And on over here in the general notes, I went and put in the finishes.
I went and put in some kind
of catchy notes in there, but let's see what it does.
So all I'm going to do is drag and drop
My step file and my PDF,
because I have both for this, into my folder here.
So it's going to process this when I go ahead.
Now it's going to ask me, what are the notes?
So let's say I want to go ahead and say,
quote, quantities of 5, 10, and 50 parts.
Uh, yeah.
Yeah, that's all I'm going to say for that one,
because the rest of the notes on there,
you know, it should pick up what's already on the PDF.
So we're going to leave it.
And I'm going to have my analyze with quote agent on here.
This is the secret sauce button that uses the AI
to actually go in and show you what it does.
So I'm going to hit create RFQ.
It's going to go ahead and start processing these.
Now, I already did this yesterday just to save time here.
We're going to go over to here.
Essentially, what it's going to do, if I go back to that first one.
It doesn't take very long at all.
It's going to process, classify, pull out things,
and ask me questions over in this window here if there are any.
You can see it's already popping up.
We'll just stick with this one
because it really doesn't take that long.
Now, if you've noticed in the project notes,
I had quote quantities of 5, 10, and 50 parts.
It automatically picked up.
There's type 3 hard coat anodized, the class, what color it is, undyed,
and it's already picked up drawing marks marked reference,
not for production, estimating only.
This is important because I did not tell it that.
It's already picking those up.
So we'll go back to the first one just while this processes.
We'll go to the ready one that's ready to go.
When it's done, this is what I'm going to see.
This is the exact same part.
I put three or four week lead time into it yesterday
because I wasn't sure if it would pick it up.
It did.
And what it's going to do is it gives me its exact thought process
as to what it wants me to look at, what it wants me to think.
But we don't even need to go through that there if we don't want to.
Right here, you're going to see parts at a glance.
We have the material that's been called out.
We have the difficulty and the findings.
It also has right off the bat what the cycle time it thinks will be.
But we're going to go ahead and break
that down to take a look at what that says.
So this is the analysis of the quote.
So you can see right off the top here,
it puts the envelope of the part.
It's the customer, which is me, because I put it in there.
Cycle estimate and our unit cost at 10 pieces,
because I only quoted 10 pieces on this one.
But the interesting thing is what this does is it goes
and picks out what I should be paying
attention to on this quote.
So right off the bat, I got a red, which is high, high concern.
So what it's calling out is this center bore here has a very,
very tight tolerance that is
tolerance after hard coating.
Now, not only do I know why that's going to be an issue,
it's going to tell me why this is an issue.
It says that the coating can actually grow the surface
And depending on the platers, the anodizer's ability,
that could be a concern for me.
Are they able to be consistent to half a thou?
Pre-anodized bore target is about this.
It depends on the process capability
of the anodizers if it's going to work.
But then it doesn't just say, here's your problem.
It actually gives me a solution.
Plan to finish the bore with a boring head,
then run sizing trials or ask the anodizer
for coat thickness.
Or it says, ask the customer, can I hone the bore afterwards?
What I think is interesting about this is it's
not just giving you a list of problems and saying,
hey, figure it out, stupid.
It's saying, hey, here's what I would do as a fake AI shop owner
for solutions to this problem. You know what?
For that bore, that's exactly what I would do.
Not only, hey, here's how I could get it done.
There's a good question in there.
Does it need to be anodized in that bore?
Can I hone it? These are good suggestions to look at.
What it will also do is tell me what the risk
is of that and then what it wants to add to the setup
in order to deal with that issue.
So whether that's making the phone calls, whether that's
running a trial to see how that bore is going to come out,
it automatically puts in some money
and set up time for that.
Now, before you actually get to this whole point, I should put out
It's basing the unit costs off me setting up my machines in here.
So when I first set up this shop in here,
it just asked me what machines I had.
It's very simple.
What kind of rate would I like to get for them?
And is there anything special about those machines?
So do I have a fourth axis for my VF2?
Does my ST20 have live tooling?
And I just went pop, pop, pop, pop, pop.
And now everything else is automatically kind
of filling itself in here.
Now I have some medium concerns here.
So these are just things that I should
be aware of, but they are a risk.
All dimensions apply after anodize.
So this basically says, hey, listen,
just so you're aware, there's no features here
that I can rough and just trust.
Again, this is going to depend on the anodizers.
But because I have general 5 thou,
general tolerance on it, it's probably going to be
fine.
That's kind of what it's saying there.
And then if I go down here,
so we'll just kind of skip past a couple of these.
My low risk here are just calling out things I should be aware of.
So, for instance, cosmetic edge break requirements,
the drawing calls for edge breaks,
just be aware you need to do this. Internal corners are quarter inch,
so standard mills can cut them.
In other words, here are some things you should be aware of,
but they're not necessarily an issue.
So let's say I say, okay, I'm fine with all this,
I understand. I can now go to my quote info.
So what this is going to do is actually break down
where it's pulling that money from,
that costing from, what machine I can put it in.
So I have everything here.
It looks like it's going to be in the VF2SS, which we have.
If it was a bigger part that can only fit my VF4, VF5, VF3, whatever,
it would automatically populate it into there.
But because my VF2 is my smallest machine,
it's going to automatically pop it in there.
I can change that if I want, but I'm going to leave it.
So what it's going to do is it's going to go through and show me,
here's my unit cost.
Here's my total cost by 10 parts.
And here's where it got all that information from.
So it automatically not only says,
hey, here's the machine it's going to run in,
but here are the ops it's going to run in.
This is, again, going back to that kind of
cam assist physics engine
that is going to use its logic to already figure it out.
So it's going to run on my three-axis mill for op 10.
I'm going to run the bottom, face, square, upper sides.
There's my cycle time.
There's my setup.
There's my rate per hour.
For my op 20, so op two,
I'm going to flip it over, face to two-inch, pocket,
do my counter bores, finish the bore.
Then it also puts in here
deburr edge break just on a bench.
I did not set up Deber bench anywhere,
just so you guys are aware.
It just kind of says,
hey, you should probably put this in here.
I can change anything I want in here,
but it's using that logic to just figure it out.
Then going down here, materials, services, and tooling,
it's not pulling anything in there right now.
It's just assuming that I have everything for it,
which is fine, but if I wanted to,
I could go in and add something like tooling
and put the cost in per part.
But it's going and pulling a general price for that aluminum blank.
It kind of averages from what I understood about this,
an average online price for aluminum on here.
And this is in Canadian dollars, which is what I'm using.
It's estimating a scrap rate,
and then I get my per part cost out of that.
It's also going to go ahead and pull my Type 3 hard coat anodizing.
Very funny.
I never told it what anodizing costs
for a minimum lot of Type 3 hard coat.
Our minimum type three hard coat is $400 minimum lot.
So I was kind of impressed by that.
I don't know where it got that from
or how it came up with that.
But again, let's say I wanted that to be 500.
I can just change it automatically, it'll populate.
And then it's automatically gonna say,
hey, you know what?
There are some tight tolerances on here.
You are gonna want to inspect every part.
So it gives me a setup time to get all my gauges
and my bore dials and everything.
Bring them over to the inspection area.
Gives me how long it's probably going to cost me
or how long it's probably going to take me
to inspect each part and my rate per hour.
And at the end of that, let's say,
do you know what?
I like all this.
I can hit quoting.
Now it's going to show me everything on here
that we just went through.
Shows me my workflow, my lead time.
I can customize this all as well.
Put in my customer here.
Now I can actually build my whole quote here.
And it's going to make suggestions in here
the same way it makes suggestions other places.
Like, hey, you know, these are where you should
be putting in your caveats.
Bore will be honed after anodized.
Just notes that you should be putting in there to your customer.
I have my lead time, delivery terms, payment terms, my notes.
This is just everything at the bottom
of the quote saying, you know, this is good for 30
days or five days with the way material costing can change.
And I can show this right now if I want as a preview.
So again, if I set up everything in here,
it's gonna generate a quote, nice looking,
and I can send this directly to my customer, easy peasy.
So now I can generate that PDF and issue that quote.
Pretty simple, pretty simple.
But that was a pretty simple part.
So the other part I designed for this,
I tried to make a little bit more confusing.
So this is, you know, anybody can pull information off
a standard quote drawing,
but what if we had feature groups?
What if we had whole diagram locations as opposed to being
actually on the drawing? What if we had inspection notes?
So I tried to make this basically a bit of
a nightmare drawing for it. You know,
the kind of drawing where if you're quoting, this is something
I would probably miss something on if I was rushing.
So I popped this one in again, very,
Very, very easy, I go to RFQs, new RFQ.
I just drag and drop my...
Step and my PDF, very, very easy.
Pop it in.
Again, I'll say quote two, five, and 10 parts.
And I want it to pull out the rest.
Create RFQ.
So again, it's gonna go work in the background here.
Again, I can be running four or five of these
at the same time.
I can also upload, right now I'm uploading
one drawing and one step.
I can upload 10 and just let it work
while I'm doing something else.
And then when I come back,
you can see it's already pulling things up here.
But I did run this one through the other day too,
just so we can be quick on it.
I could come back after going and talking on the phone
or going and dealing with people on the floor
or replying to emails or making parts even,
come back and this is what I've got.
And it's already has everything analyzed for me.
So I actually went 50 and 100 parts on this
when I did it yesterday, but that's okay.
So here's what it pulled up about this.
This really impressed me in that it's pulling up
things that I hadn't even really considered
when I made the drawing.
But our concerns, such as burr-free cross drill intersections.
This is a manifold block, so there's a lot of ports going into ports.
It's calling out, hey, this is going to be a bit of an issue to do.
Closed bores and ream must meet size after type 3 hard coat.
So again, this pulled up that same concern there.
But again, it's giving me the solutions
for how I may be able to deal with this.
Expect to sort parts on pin gauges after anodized.
Scrap risk is concentrated here.
Basically, it's saying you won't even know
if these parts are good until they get back from
anodizing. You're going to probably have an issue with this.
And then again, it's just pulling out
things that are interesting.
So I didn't even notice I had a CAD and drawing mismatch on a
bore. So it's saying, hey, the CAD shows 17 holes.
They match the drawing for these tap drills.
But then these other holes are actually different.
So it's missing something on the model that's on
the PDF. Again, good thing to ask before I actually even quote it.
Because how many times have you
quoted something, noticed a discrepancy
and then it turns into three days of waiting for engineers to talk to
each other, but it's a rush part and you're et cetera, et cetera.
This catches it before I even
get there. Six face access, four milling setups.
It's not saying this is a huge problem. It's just
saying, be aware of this. You got to run this from every side.
You're going to have to do it.
And then again, material and stock, it's calling it out as a low issue.
It says that it's pretty easy to source a machine.
So again, it's just maybe something I should be aware of.
So we go through our quote info.
Again, I'm not going to go through this in too much detail
because we just did it,
but it's going to show me all my setups,
what I have to do.
It's not going to do the programming for me.
This is not CAM Assist,
but it's showing based on this pricing,
this is the approach it was thinking I would take.
Generally, it kind of sounds like the way
I would do things so far.
And then again, we can put in our tooling.
We have our anodized lot charge.
The other thing it put in for this,
because I did put on this drawing that a first article
inspection is required.
In my inspection steps,
it pulled up first article inspection, full dimensional check
after anodize, has a fairly significant setup,
and my rate per hour in there.
Then it actually has my final inspection
to do that inspection in there.
Pretty cool stuff.
Again, I can jump through, see all this, change it, do whatever.
Now this is not the limit of QuoteAgent.
Because if I go to DFM, if you don't know what DFM means,
it means design for manufacturing.
What that means is getting a manufacturability report
for every part that I want to put in here.
So for instance, I was dealing with a customer yesterday
who sent me a extrusion drawing and
then a part drawing. And I wish I could show you this in here
because it was really what this does,
but it's NDA, so I can't.
And he said, hey, can you let me know
if this extrusion is going to work for this part?
And then I was looking at the part and I was looking back and forth
and I'm saying, you've got issues beyond the extrusion in here.
The actual manufacturability of this is going to be really tough.
So what this does is can actually generate that report for a customer
or for us internally, just based off a PDF and stuff.
So, for instance, I uploaded these same parts yesterday.
If we go to our first drawing here, it works the exact same way.
Drag and drop, pop it in.
It's now going to develop a DFM report for me.
So if I get my report ready,
this is essentially what it is going to show.
So it's pulling all of the concerns that we had
from the actual quoting process, adding
explanations, showing where they are on the drawing.
So for instance, remember that bore?
It's going to call out, here's where that is.
It's red.
So this is a big issue.
Here is why it is a problem.
Um,
For three here, so this wasn't on the quote.
This is a DFM issue.
Add datums for the bore and hole pattern.
If you see here, this is just a general drawing.
It's not calling out any hole locations.
Yes, I have the step for this,
but you should have that on a drawing
so that people can reference it.
It's gonna say you should put the datums on here.
Number four, does every surface need type three hard coat?
And so on and so on.
So if I export this report,
just to show you how this looks,
I can actually take this and give this to a customer
I can look at it with my guys on the floor
and we can go through this.
So here's what this part is.
Here's my part number.
Here's the material.
And this is what this is.
Now we have a summary of what all the issues are.
Then it's going to go through,
show them to me on the drawing
and then give me an explanation
for why these may be issues.
So what this is, a DFM report,
if you have not used them,
they're really, really common in aerospace manufacturing.
They're really common in.
Production, high production manufacturing,
where you're trying to get every potential
problem with that part out before it's even released to the floor.
This does all that for you.
Simple as that.
So again, if we go into our other part here,
just because it was a little bit more complicated,
to show you what a more complicated DFM report looks like.
If we hop in here, this is for that manifold block.
This is going to tell me what the part is, gives me a summary.
Then it's going to go through
and all those things it didn't like about what we were doing
in the quote, it's going to call out.
But it's also going to give more practical advice for it.
So for instance, about the Deburr method,
on the quote, it said, hey, this is an issue.
The DFM says, here's what you should do to make this manufacturable.
So it's almost like I can
take this to my customer after the quote,
and it spits out all those issues for me and say,
hey, here's what we can do to make this probably cheaper
and faster. What do you think?
No one's going to be mad at that.
And in some cases, it's actually a requirement.
And on top of that, we don't do fares here,
but you can upload drawings to get your bubbled drawings
if you've ever done any AS9102 Form 3.
I've seen these before, but I have not done them.
But basically, these are your bubbled drawings.
So this is your inspection report type stuff.
I don't know a whole lot about this,
but I have seen multiple companies offering
standalone software to do this.
So the fact that it is included in here is pretty exciting.
The other thing this does is it can act like
a basic ERP for you as well.
So I can have my purchase orders in here,
manage everything through there.
And then on top of this,
we can actually keep track of all the parts we've done for every
company.
So if I have multiple companies here besides my own.
It will list everything out here.
We'll show what my pricing was and so on and so forth.
So in any case, guys, you should go check this out
if you are interested in winning quotes faster
and missing less potential issues.
This is a real kind of top to bottom system
that I haven't seen before.
It has that AI enablement without...
Keeping the AI on top of you at all times
and you can't change it, still very flexible.
But in any case, take a look.
Let me know what you think in the comments below.
There is a free version of this
so you guys can play around with it.
In any case, guys, thank you very much for watching.
Make sure you turn on notifications below
so you never miss a video
and make sure you like and subscribe.
Thank you very much for watching, guys.
You take care.
