The Legendary Transformation of a Million-dollar Mistake | Full Custom Garage | 4K

Tech Care
3 followers
Sep 12, 2026
Right now on Full Custom Garage, Ian continues the transformation of the T-Bird bubble top
and his client pushes him even further. It's already been built two times, what's one more
time? I want it to be like a spaceship. Some people would think of this abstract idea as like,
what? And I'm like, yes. I spent a couple seconds inside that dome and it's hot.
So we're having vents in the front that'll vent the cabin and then vents in the back that'll
exhaust it. But the mission doesn't stop there. My whole task here is creative metalwork and
mad scientist inspiration. It's got a pro interior dude. I meet the guy and it turns out he's deaf
and Victor's like moving around flailing his hands, this and that. You know what? I moved my
hands and I'm a hand talker, if you could see, and we could communicate perfectly. He's talking
about making it look like this is like the main power source for the entire car. It's crystal
powered spaceship. I'm a saddle guy, maybe you could tell by my car. With the finish line in sight,
Ian and Victor take the bubble top out of this world. We're on the final run of the whole game
right here and Victor comes up with another idea. But now I said, Ian, we need a new element. He wants
to take it one step further, so we're going to try something unique once more with the roof. I don't
know exactly how we're going to get there, but this car is going to be amazing. This thing all started
when Victor and I went to a car show. Victor is non-stop about wanting this bubble top. He's
chewing my ear off about it and I'm thinking the quickest way to get there is to use one of our
old projects. We decided to use this 62 T-bird that I built from a while back. I figured if I
made a bubble top for it, we could put it on and we'd be done. So I built a huge oven structure to
heat up the plastic and we took it to Victor's. And he said, well we need some igniters or elements.
I said, I got some perfect elements. Let me just finish cooking my steaks. Victor and I share a lot
of the same characteristics. He's always pushing me for more. And I said, Ian, crank it up. Let's
take it to the limit. Yes, Captain. Taking it to the limit. We pushed it too far, so I went to talk to
Every day is a school day. Ian's a real good craftsman. I think he's going to go back and
rework that bubble and it'll come out fine for that T-bird. Seeing Gene was really inspiring.
It got me fired up and I came back and blew a successful bubble. This thing's on the car for 15
minutes. Everybody's praising it. You know, wow, yeah, that was a great experience. Victor wants to
go bigger. He wants something better than this. When I seen it come out, I said we achieved our goal.
And if we were normal people, we would say, all right, let's get the hell out of here. We're done,
but we're not. The crazy thing about working with Victor is he's always pushing me. We're sitting
there checking the car out, thinking about ideas, and he comes up with this spinning bubble top.
I said, okay, Ian, this one's going to spin, go up and down and spin. This was such a crazy idea.
I just needed to build it quickly and cheaply to see if it would really work. Literally, this car
lifts up, spins around. It's awesome. You've never seen that before. I took it down to Victor's to
show it to him. I pull in with the trailer and I see Victor. He's not really jumping for joy, let's
say that. But just seeing this wild concept got his brain going in a whole new direction.
Accomplishing this bubble top, I think I might've blew a fuse or something in Victor's psyche,
because now he's really going off the deep end. He's talking about some wild concepts,
and we're only at the beginning of this next stage.
The whole thing is detail. I have to remove this foam in the most precise manner possible.
This whole car is conceptual. The ring that holds the bubble was looking good.
Victor wanted it lower. All right, so Victor changed his mind a little bit, or Victor changed
my mind. It's not going to spin anymore. It's just going to be a simple up-down motion, way safer.
Primary issue is safety. This thing is coming around to the car show and does as it's been
doing. It's going to take somebody's head off. This whole thing I was setting up with the body
being raised up and contoured to the ring, he wanted it to be lower. We're going to cut this
whole area out, and then lower the ring to the same height as the door. Refitting this metal
ring, it's a flat base that the bubble sits on, and the car has a curved surface. So I created
this series of steps that allow the ring to fall down into the car and still look like a finished
part. Once all these pieces get finished up with the door jams, and then this whole thing is
blended together with fiberglass, it's going to look really neat. We really refined the way the
whole bubble opens. I was trying some crazy stuff with the weight of the car lifting the thing, and
it just wasn't safe. We just went to a simple hydraulic ram. It's tried and true. It works
perfect. He's already got the pump here that used to lift the rear of the car. So we're going to tap
in with another switch. You can see it's big enough for a tractor or a snowplow. It matches
the ram that used to actuate the back lid, and they'll both run off the same motor. I spent a
couple seconds inside that dome, and it's hot. This thing's a spaceship. There's people inside. There
needs to be a way for air to get in and out. I made these vents in the front of the car.
Victor loved them. He came up with this concept. He wants some more vents towards the rear.
So my challenge is to match them, you know, complement the front with the back.
I think I like this idea. The car is so flat that by putting these vents in, it's pretty cool.
It kind of lends itself to the louvering thing in the 50s, but this is like new old space age stuff.
All these vents work. It looks cool, but it's gonna keep you alive in there.
Otherwise, you're gonna cook. Once the ring that fit the bubble was established in the car,
it looked great, and it worked so good, we decided to seal the doors up.
That's the main point of getting in and out of the car is through the lid. The bubble top is
gonna be the only way you can get into the car. That'll hinge up, and you'll get into it like you
would a flying saucer. Should be cool. There's no gravity in space, so you can just like float
over the edge and land in the car, so that's the whole thing. There's a lot of metal fab that's
gone into this car. It's really been a huge process, but that's only the tip of the iceberg.
The plastic part is the real challenge here. Today's whole mission is to get this dashboard
in gear. Just finished some really basic structure to just hold this gauge cluster.
It's from an early Plymouth. I think it's a 300. This has been used in a couple other really
popular show cars, and the reason we're using it is because it's freaking cool.
Since we added the bubble on it, I said, hey, we can't just have a regular car interior.
You want to follow that theme and bring it inside the car, so I want to have some kind
of clear plastic elements on the interior. The big challenge with the plastic is creating
three-dimensional shapes. I'm using fiberglass for the dashboard. It's going to incorporate
an acrylic dome, just like the roof, and who knows what else. The first tests I did of creating this
bubble out of acrylic just incorporated a simple metal box with a burner and air inflation. A
smaller size is a lot easier to work with, so I figured I'd come up with a really cool twist
on what I've already accomplished and showcase it right in the middle of the dashboard.
Every bubble I've seen has been blown off of a flat base. I thought, why can't you just do it
off a curved base? Unscrew it. The main difference being I created a metal backboard
with this S-curve, because when it's sitting in the car, this is going to be the center console.
So the center console wraps up, and then you have your gauge pod here, and it goes into the
dashboard. So this is just a piece of sheet metal, a couple pieces of 55-gallon drum,
and a whole brake line. I pretty much nailed this whole heat and inflate of the acrylic domes.
The big challenge here was fitting it up in the curved base plate prior to anything. Usually I
would make a wood retaining ring like with the other setups, but the wood wouldn't bend to this
drastic curve. So I heated up a piece of acrylic and just let it sag down, and that became the
retaining ring. So what the paper does, you can see the holes I punched here, the air comes in,
you see the hot air blast, and it just diffuses and gently fills the thing up with air. So it's
a gasket. Pretty slick. These two got overheated, but it's still the center that I'm looking for.
So I'm going to cut this center out, and I'll put it in the car, and you'll get a look at it.
By building this cool metal backboard, it puts an S-curve in the base of the bubble,
and it makes a perfect transition from the horizontal dashboard down into the center console.
So this is like your center console here, and then to get to the switches and stuff on the
gauge, this will lift just like the roof on some kind of an air ram, and then you can turn on your
lights and all the other stuff. So it's just like dimensional plastic shapes. You know, you got one,
two, and then three. It's gonna be like a real fishbowl in here. This whole thing is really
my greatest achievement. It's something I've thought on for years, and here it is. This is a perfect
curve base bubble that is going to be the centerpiece for the whole car. The whole concept
of the interior, especially the look of the dashboard, is just like alien technology. It's got
to look kind of spacey, kind of organic, and I think fiberglass is the only way we're going to get that
really curved compound surface. The whole dashboard is fabricated at a solid round stock. It's really
easy to form. I can make mirror images of the left and right sides simultaneously, so it's just
a quick bend, cut, and weld. Setting this whole frame up is typical fabrication. It was a no-brainer
for me. The big challenge is in getting this fiberglass to hang there. Fiberglass resin is just
a liquid, and the material is super flexible, so it needs some kind of a spine to hang on until it
turns solid. The whole thing with this process is if you haven't done it before, you don't know what to
expect. A friend of mine, Scott Owens, he showed me this cool trick with aluminum foil and fiberglass,
so I'm gonna see if I can't pull something off. The whole idea with laying this subsurface for
the fiberglass is using the foil and trying to stretch it across the steel ribs that I made.
That way, you have this really organic shape, and it just gives the fiberglass a perfect
backboard to hang on until it sets up. I have very limited fiberglass experience.
I was able to lay up a ring on the bubble for the roof, and so far, so good. We created a ring
that lifts off that will hide all the screws. That way, the bodywork comes right in. It looks
like a headlight bezel. It's a nice, clean, simple ring. So you can see here, you got your steel frame.
You'll have your fasteners with rubber rings to hold it down, and then this nice, clean ring
will snap on top, and it'll be perfectly smooth. Fiberglass with a Bondo cap.
I got the foil in place. It was pretty simple to set up. The next step is to trim out the fiberglass
and mix the resin. So, lay a little of that in there. This next part's like making a lasagna.
Just throw your noodles in there. Toxic lasagna. The whole process with the fiberglass is to mix
up the resin properly, cut your mat to size, and basically just soak it, screed off the excess
liquid, and then put it in place. The idea with using the fiberglass on the inside is that it
will give us a really organic, multi-dimensional finish that we can paint. That way, the outside
of the car wraps over the top and comes right in. I really like the idea of doing more fiberglass
work. It's way faster than metal, and it's lightweight. The whole thing with fiberglass
is it's fast. It's a little stinky, but if you were to create these compound curves in
steel or aluminum, you'd be at it a lot longer than the 20 minutes I've invested so far.
The whole thing with fiberglass and the rate at which you work really is determined by how much
catalyst you use and the temperature. It kicks off from a chemical reaction, and the hotter it is,
the faster it goes. It's a little chilly today, but with my laser, I will activate the catalyst
and be on to the next step. Fiberglass finally kicked off. It's nice and solid, so the next
step is to pull the whole piece and then take out the excess tape, aluminum foil,
whatever you don't want. Aha! Pretty sneaky, sis. I pulled it off the dashboard, and it looks like
it's a piece that will fit on and off as many times as you need. Tear up like that. Then once
it's fully hardened, I can sand back the edges. Glue her in place. The last step in this preparation
is to just bulk it up a little bit with some Bondo. Fiberglass is good and strong, but there's
some surface imperfections that I don't really want to sand out because that would make it a
while the resin's still fresh. That way, the initial block sanding of the whole piece
will really cut back the Bondo instead of the structure of the fiberglass.
The cool factor is the Bondo and the fiberglass are friends. They just bond to each other like
the same chemical compound. The whole thing with the original concept of the dashboard was more of
a waterfall effect, a typical Art Deco element. I came up with this thing with a center rib and
it's still that flavor, and the sky's the limit at this point. This is where the sculpturing starts.
It remains to be seen what Victor thinks of this design. He explained something that was
exactly the opposite of what I've accomplished, so we'll see what he says. I have two concave
panels meeting at a rib. He wanted two convex panels, more like a waterfall.
Create two puffed shapes, almost like a tuck and roll upholstery job. It could still be done
because now we have a structure to work off of, but this might be good enough for him. I really
like this look. Just as the dashboard's getting solidified, Victor came in and loved it. Fortunately,
I did the right thing. The whole idea with the way Victor and I work is just creative collaboration.
It's just conceptualizing, and then it's my gig. I make it happen. One of the big challenges
in this car design is skirting the front tires. We had to bulge the side panels so the thing would
steer. Victor's been kicking around a couple ideas on how to make this work, and I think I got a good
concept. The whole idea with these skirts would follow the line of the vents in the front. It'll
have the same screen detail on the inside, so the body will come to the vent, and we'll just
flush out this and blend it right back through the old door jamb. So we're hoping that this
will give a little reason for this whole radius on the front fender. I laid out these square tubes
that are going to be the base of the floor. I think we're just going to make the seats ourselves.
Victor didn't like the seat that was in the car, so I just set up a framework here. It'll be the
base of the floor that's going to roll down into the footwell. It's a spaceship, you know? No rules.
These are the seats that were in the car. They look cool, but you've seen them before, right?
So Victor wanted to do something next level with it. This seat was pretty bulky, and it was hitting
the perimeter of the bubble, so we would have had to modify the seat back anyway. We talked about it,
and I came up with a design still developing. The seat bases are going to be in the car, and then
this will be the seat back. So it's a lot smaller. It's just like a little lumbar support, and we're
thinking about having them pivot and disappear into the floor of the car. I set up some round
rods, just bent it to shape, welded a couple nuts on there for a hinge. I'm going to cut some holes
in here because Victor was saying he wanted some LED lights in the seat back, and you know, it's
just developing. We'll see. We'll see if it actually flies or not. These are on hinges. That way they'll
be adjustable. You can hinge them up or down if you need to access the flux capacitor in the back
or whatever. This is an 18 gauge sheet. I just put it in the brake. It's got a little curve to it, a
little area for your butt to sit, and these are going to go right in here. The idea being there'll
be a four or five inch foam pad to make it nice and cozy. My whole task with the interior on this
car is really just framing it out. I tried one interior in the past, and I really have a lot to
improve on, so I'm going to let the professional handle it. The one thing anybody who is going to
critique a bubble top, the first thing the negative people say is, it's going to be really hot in
there. Victor's answer to that is a vintage stainless steel fan. My main plan is to create
two clear globes in the front and rear of the car and then have a clear plastic air duct connecting
the two. So everything's following suit with the shape of the main roof bubble. So this is the back
wall that will have the air coming from the upper vent down through here. So I'm just going to
shroud this in. That way the fan will draw. This will all be walled off. It'll have no choice but to
draw through that vent up there. I've primarily built cars for Victor, and I think he's just
getting super creative on this. He's not concerned with driving this to the car show. He's doing
something to make a complete spectacle. That's the bottom line here. Looks like Victor's caught the
bug. I said it before that my kind of crazy is pretty contagious. He was putting the reins on
this thing earlier and now he's out of control. So that's the concept. The air comes through the
back vent, through the fan, into that tube, and then it ventilates the cabin. Feel that breeze, Tony?
It's good, nice, right? The big cool factor with having Victor's guys to back me up on the body
shop aspect really allows me to try to pull off one last trick. We've made a bunch of successful
roofs for this car. We're on the final run of the whole game right here, and Victor comes up with
another idea. The third one came out perfect. It flowed perfectly, but now I said, Ian, we need a new
element. He wants to take it one step further, so we're going to try something unique once more with
the roof. The light of fire, man. Yeah, and actually I know it's going to work. You've seen a clear plastic
bubble a million times. He wants something more. He wants it like a pattern embossed in the rear of the
roof, and it's like a whole new direction. As a last-ditch effort to stop this frame from flexing,
I just put in a bunch of wooden shims because the box starts to blow out of shape. There's so much
force from this. We've got like 180 bolts clamping it together, but the box just needs to get up 300,
320, and it's good to go. But getting 300 degrees over 32 square feet, that's the real challenge.
For this last try, I think we're going to need more heat, a little more propane, a little more fire.
It remains to be seen what's going to go on once we get up to the proper temperature.
The only access I have to the material is through these little portholes.
This structure that's inside the oven doesn't allow me to see in there. I really only have my
past experience to guide me through this. We're not going to know if it's a pass or fail until
it's done and on the car. I think we're there. All we can do is turn up the air pressure.
Ready? I'm gonna do it slow. The good thing is this is working just like all the rest.
The heat's even. The thing's inflating. It's looking good. Oh, the front. Look at this.
Amazing. We're there. I can't push it anymore. I'm gonna raise it up. It's the moment of truth.
Oh, we got it, man. Look at this. Yeah, see, that's what I was looking for.
We get this thing nailed. It looks perfect. I think we're good. I think we got it. And it's
just enough rib on all of them have ribs. That's what we added on here. Raise it up out of the
And there's like a defect. I put all these reinforcing screws in there,
and one of them has pushed the base out of position after it's inflated. There was one
screw that was still poking through, hitting the second bar, which didn't allow it to sit.
The bubble came out perfect, but the screw was hitting, so the front of it wasn't straight.
When we put it on the car, it's not going to fit. It's like an old record on a record player when
they get a lump in them. That's what we have in our base. It's not going to work. The plastic's
still warm, though. It's very soft. We're going to throw a clamp on it and reheat it. This is
highly unorthodox. So there's always something. This is our last stitch effort.
The bubble came out pretty good, but see, the base plate gave out right here. It's kind of warped.
I got the ovens on high on this side. We're going to put a piece of steel,
clamp it, lower it back in, try to get some of that shape to even out. We're going to try this
one little remedy and then take the thing out, see how it looks with that buck off of it.
That was a perfect bubble, too. Right there, we're on it. I think you got it, man. I think you healed it.
All that matters with this project is the end result. I mean, once you pull the bubble
out of the oven and see this apparatus attached to it, you know it's pretty intense.
Everything looks great. It's back into shape. The whole idea is to just
cool it off, raise it up out of the box, and unclamp this beast. I took this half-inch MDF
board and created a series of templates off of the bubble Victor liked most. I spaced them out
eight inches apart, made a whole bunch of support to withstand the pressure of this
bubble pushing against it, and fastened it to the backboard. Getting the buck off of this thing
really revealed that it was a successful idea. This is uncharted territory and the result was ideal.
It's pretty crazy, but the real tell is going to be how it fits on the car. That's what this is all
about. So we cut it out, brought it over to the car, and then yeah, that was what we were looking
for. It's freaking awesome. Look at it from this angle, man. This is freaking ridiculous.
That with the lights coming through, bend down and look through. Yeah, and then look what it
shows the other bubbles in there. Bubbles in the bubbles. That's impressive. The whole idea with
these ribs in the roof was that it was going to diffuse light. It was going to look like multiple
layers of plastic and we nailed it. When you look through, you see all these ridges. There's a
million reflections. There's the interior bubbles. It's just out of this world. Victor's in love with
this thing. I think he was just like gambling, you know, with this last ditch effort to pull
something off and he won. I've never seen anybody do that before. The creative process on getting
this bubble top done is there, but this is the whole car. Victor wants to set up the interior
on this car to be just out of control. Something no one's ever seen before. It's basically a blank
canvas and anything goes. My whole task here is creative metalwork and mad scientist inspiration.
He's got a pro body guy on the job, he's got a pro interior dude, and he's got a mechanic.
I finish my work on Victor's vehicles and I don't see him for months. I come back and like there's
these amazing paint jobs, incredible interiors, and I've actually never met the people he works
with until now. Victor's interior guy is here. I don't know where he learned his craft, but he is
like top notch. This is my upholstery guy, Lino, which is fanatical about inches and this car was
hand built and nothing is precise. It's close and we're trying to just figure out the details on
filling in gaps where we didn't anticipate, you know, area that needs to be filled in or
something added to it. You give him an idea and if it's not right or flows, he'll make it flow
and tie into the concept of what we're trying to achieve. He won't do it unless we could do it
I meet the guy and it turns out he's deaf and Victor is like moving around flailing his hands,
this and that, and that's really how they hash out these ideas. It's pretty crazy. There's like no
verbal communication and the results are outstanding. Right here it's gonna go rubber.
He's saying here he told the guy to put steel in here and to clean up this edge, but I told him
I got a rubber grommet gonna cover all this stuff and he says no. I understand what he's telling me,
same with he looks at me and you know what I move my hands and I'm a hand talker if you could see
and we could communicate perfectly. He understands what our goal is, is to make
an awesome vehicle that we could share with everybody. The diamond, oh he wants to put
diamonds in there. I think he's caught, I think he's caught the crazy too man.
Now he's getting out of control. He was Mr. Conservative at first.
No he's like, now he's yeah he's fallen under the spell. This here I had to take my old lady's
jewelry apart, but she won't figure that out in a while. The whole concept with the center console
is to move air through the cabin and Victor comes up with these crazy ideas. He's got all these clear
crystals, he's got LED lights, he's talking about making it look like this is like the main
power source for the entire car. It's crystal powered spaceship. There is 100 different
variations, but you see how that this is in the day people. Here let me adjust that. Here we go.
There's another one or maybe you want that or maybe you want this or maybe we'll do that.
I mean it's getting like out of control and we'll do it subtle. I'm a subtle guy.
Every time I look at it, I envision things. My vision comes from just looking and expressing
this is the way I feel. You know what I may be an old man on the outside, but inside I have a vision
and I'm cool and this is the way I release my inner vision of what I think of cars.
I've seen what this guy's done on the other interiors and they've all been fairly conservative.
His workmanship is out of this world. There's no limits on this interior, so I can't wait to
see what he comes up with. We're going to finish up the interior, then we're just going to get the
car wrapped and just the final detail of just wiring it up and we're done. We're so close. I let
Victor take the reins in the last step of this project. I came in today and the thing is freaking
unbelievable. This car has been in the works for a long time. It is a concept car. It's gone through
so many phases of development and now to have it finally wrapped, I'm stoked. The car came out
amazingly beyond my expectation. On the bubble top, the interior, this is a total custom build.
The bubble top is next level. The car is, like I said, a piece of art. I mean the car
is a masterpiece. I saw Victor pulling the driver with this thing. I was like, get out of the way
mister. I want this car. Well Ian when he came in and seen it, all of the ideas all came together
and he was impressed. The thing drives up and it looks like a spaceship. I wish it didn't have tires.
You open the bubble top and the interior is just going off. There's all kinds of crazy stuff going
on in there. I'm ecstatic. He's ecstatic with it. Everything flows just perfect. At the end, I got
my interior guy, Lino, and he was saying, you know what, enhance the bubble by putting chrome around
the bubble and putting chrome on all the ribs. They're perfect. They really highlight the ridges
in the bubble. Victor wanted some kind of a crazy alien inspired paint job. I seen a car going down
the street with a wrap on it and of course me, I got the most crazy elaborate wrap. It almost
looked like a reptile. He had these guys come in and wrap it and it looked reptilian. On paper,
it looked brown. As we put it on, it was orange and actually I had a couple nights of lost sleep
because I really like hated it. I called Ian. I said, Ian, come look at that man. I'm really not
happy with it and I knew we had to do something. This car was going downhill and he said, look,
I painted over it. I said, paint it over it and we painted over this wrap and it came out freaking
amazing. Fortunately, we're able to pull it back, tone it down with a brown candy and it's on. It
looks like some kind of a fantasy lace pattern beneath the clear coat. This clear coat with the
candy in it saved the project. That to me is the spice of life. I don't want things to go smoothly.
I want to hit walls. I want to run through dead ends and recover from it. This is a perfect
example. Ian is so resourceful. Maybe 90% of everything that's on this car that you see in
the interior and exterior besides the actual car was stuff we made work from the hydraulic system,
from a part, from the back bumper to the instrument panel. If he doesn't have the part,
he'll come up with something else. He'll walk around the junkyard and find something and put
it in there and it works better and at zero cost. Since I'm 15 years old, it's been car after car
after car. That's just what I do. I can't stop. All of the projects I've done so far have really
just expanded my skill level, my creativity and just the idea of what's possible. So whatever's
coming up next is gonna be big.
