BUILT TO BE DRIVEN | Peter Sharp’s Widebody HQ Monaro | Inside DTK EP07

Tech Care
3 followers
2 Video Views·Sep 27, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video showcases Peter Sharp's custom wide-body HQ Monaro, a ground-up rebuild by Downtown Customs. Originally a rusted shell, the car has been transformed into a high-performance, long-distance tourer featuring extensive handmade bodywork, a supercharged LSX engine, and a focus on drivability and comfort for cross-country travel.
Hey guys, we're out here driving Peter Sharp's HQ Minara today and
thought it'd be a good opportunity to show you the car. We haven't had it on the YouTube channel yet,
so this is a good example of what we do in the shop there. So this car came to us as a fully,
completely rusted out shitbox of a shell, and then we rebuilt it from the ground up. So this has got,
you know, chassis modifications, suspension modifications, everything right through.
But one of the main aspects about this car is we actually made it a wide body. So
overall I think it was 200mm at the rear guards that we widened the car, but every panel's been
handmade. So the front fenders are handmade, the door skins are handmade, the door internals are
handmade, the quarters are handmade, the boot skin and the bonnet skin. The only thing that is factory
is the middle of the roof there. So a big, big job. We finished this car about six years ago or so,
and since then Pete's been out driving it all over Australia. So I think he's visited
every state now, and he's just about to head over to WA. So the reason we've got it back is we've
done a few updates. We've got rid of the air suspension and we've put in coilovers,
just for no other reason than Pete just wanted to have a bit of a change up. So
we've got it ready, we've serviced it, and now it's ready to hit the road and go to WA. So you
can walk around the car and have a look. It's got a lot of changes. One of the things is the grille
as well. It's sort of a bit of a modern take on the HQ ones. The same dimensions, same spacing of
the lights and everything, but we just changed it up and it's all been CNC machined. But the
bumpers are handmade on this as well. Not many stock parts of this car, but I think it just makes
it very special and very cool, and especially that Pete gets out and drives it. Like this thing's
been everywhere. It's covered in stone chips and it really is a strong driver. So we're just out
here today in lovely Rutherford, giving it a bit of a test run before he takes it. And yeah, like I
said, thought it'd be a good opportunity to show you what it's all about. So we might get some
driving footage, show you guys what it's like inside the cabin. So here we are in the cockpit
of Peter Sharp's wide-body Monaro. As you can see, it's much just like driving a normal car really.
Very comfortable, very nice, air conditioning, all the modern cons. It certainly doesn't feel
like you're in a HQ Monaro, that's for sure. It's very comfortable and just like driving a
factory car really. So, which is very important to Pete as he likes to travel a lot in this car,
as I was saying. So he's been around to a lot of the states, Tasmania, Victoria, Queensland,
multiple times, South Australia. And like I said, he's about to head to WA. So it's very comfortable,
as I said, him and his wife get in this car. I'm about to overtake a truck here, but that's all
right. So this thing runs the LSX 376 with the Harrop 2300 supercharger on it. And it goes
really well for a heavy car. It's a big car, so it comes in at about two ton this car,
but it's certainly very zippy and handles well. Like the updated suspension and chassis
components that we've done for this car, it handles very well. And the coilovers complement
it well as well. The airbags were good. We had no complaints with the airbags. We ran shock waves
front and back with that. And then we've simply unbolted the shock waves and now we're running
tech coilovers, which we've dialed in. But it drives very well. I'd probably say the bags were
a little bit softer, but like I said, still no complaints, still a very nice car to drive.
The coilovers are probably a little bit tighter, but I mean, we're on the back roads, country roads
of Rutherford right now. So it's a bit bumpy and a bit gravelly. They're doing some road works, but
like I said, this car is like a daily driver. It gets treated as such and driven
anywhere and everywhere. So it's one of them cars that you can literally take to the shows
and slay at the shows and then get in it and drive it hard like you should be able to,
like where I'm at now. It's, like I said, very nice, very comfortable.
This thing runs 355s on the back, so they're very wide rear tyres and they're a 19 inch.
The front's a 19 inch and they're about eight and a half. So I think the wheel and tyre package
on this is exactly the same as what's on the Dodge Vipers from factory. And the reason for that was
originally Pete wanted to tub the car inwards, but we'd already done all the rust repairs there
because the car wasn't meant to really be like this. So we did all the rust repairs on the inner
fenders, inner tubs, and then Pete found the pro-touring style cars that were popular at the
time and asked me if we could do something like that. And I said, well, we could do that,
but we'd have to go outwards because we don't really want to cut out all that work we've done.
So we ended up widening the car 100mm side of the back to achieve that massive dish in the back
with the big fat tyres. So I'm glad we did though because the amount of power this thing puts down
need them fat treads to keep it planted on the road. So we did all the work on this at Downtown
Customs in Taree. Actually, it started at the first shop in Tungurri. So this was started at
the Downtown Customs, Tungurri, and then we finished at the Taree shop there. And we had
help with the rear quarters from one of our good mates, Jamie Downey at Custom Garage in Melbourne.
So we took the car down there, we flew down there, and he's just an absolute master craftsman,
probably one of the best metal shapers in the country, very understated, quiet sort of guy.
And he taught us a lot about bucks and fabricating and hand shaping and
using the power hammer and the pull max. So we commissioned him to do all the quarters,
and then we actually had our guys trained by him. So then we could offer that in the shop as well,
which has worked out well. So big ups to Jamie Downey for doing such a great job on the quarters.
And big ups to the Downtown team for finishing this car because it is absolutely fantastic.
We're back at the shop now after that little drive and we'll just have a look at the engine
bay and stuff. So you can see here the big LSX376, it's a B15, and that's the Harrop 2300
blower. So it is a bit showy in the engine bay with all the shapes and curves, but pretty much
built for driving. And we've got serviceability there, we've got all these hatches here that we
can gain all the AC charge points and the radiator and the overflow bottles and things like that. But
come around and have a look at the back. So as I was saying, Pete drives this like a daily,
he's been everywhere, anywhere and everywhere around the country, so he needs space for his
luggage. So this car has a spare wheel, a full fuel tank and that much boot space. So that was
pretty important to Pete so he can put all of his stuff in there. And we also had to make this big
enough so that big 355 can fit in the back if he needs to change his spare. So we've had a custom
space saver wheel made in there that Forgeline did for us, and that fits underneath there nicely.
He's got tool storage in there. So everything underneath the boot there is for tools and
whatnot so when he's out on the road if he needs to do something he can. So here's a good shot for
you. We're talking about that we've widened the car, so it was like 100mm each side at this point,
but the car's wedged, so it was widened about 10mm at the very front nose cone and then wedged out.
We've also fabricated the front guards and the rear to have that classic coke bottle shape.
But come in here and have a look at this. You can see how much wider the door is here,
a lot more wider than factory. And if you come into the inner sill here you'll see,
that's the factory inner sill section that we have remade, but this is how much wider the car is.
And if we get the camera down in there we can have a look at these door hinges.
Now that whole pillar has been refabricated out of thick steel with internal bracing
and then these hinges have been fabricated as well with like bronze bushes, self-lubricating bronze,
so it can take the weight, the extra weight of the doors. The doors have got intrusion bars
and extra metal in there to make it safe and strong, but we needed to make them hinges and
also change the pivot point of the hinges because everything, as everything got wider,
everything changed. It was like a bit of a snowball effect, but that was pre-CAD,
so back then we weren't really doing much CAD work and we worked that out, you know,
the old school way, but these days, you know, we would scan it, draw it in CAD and manufacture it,
machine it or something like that. But yeah, that's all actually fabricated.
That's another cool thing of this car. There's a lot of work going into this car.
As you can see, mate, just it's like a new car. So if you come around and have a look at the
simple interior, it's sort of just like a factory Commodore.
Again, just so I can get in and drive it. That's all he wants to do.
We did a couple of shows in this car. I think we did a Sydney Hot Rod show and
I don't think we've done Motorex or Summonats. It's not really Pete's scene, but he's since then
taken it to one of the shows in South Australia and it's been around, but really the whole focus
for this car and everything that Pete wants is just to be able to drive it and I think it's
really given him a very good experience for such a fully modified car. So I hope you enjoyed the
video and I'm sure you'll see Pete somewhere around in Australia. Thanks guys.
