DREAM GU PATROL build in 20 minutes! Will it handle Cape York?

Automobile Identity
371 followers
#automobile #autos #cars #4wheels #luxurycar #sportcar #highspeedcar #testdrive #toyota #tesla #porsche #hyundai #rollsroyce #royall #suvs
I actually can't believe this, the GU was finally done, it's out of the shed and I drive it
here to film this.
I've had this thing in the making for about five years, so it's a pretty surreal feeling
to have it done and driving.
But I tell you what, I have been flat out in the shed since last time you guys saw this
thing, so come along for the ride and see what I've been up to.
For those of you that haven't been following along with the build, over the last year I've
taken a wrecked GU with a blown up engine and swapped it out for an M57 diesel and turned
it into the ultimate tourer on a budget.
And this is the final episode of that build.
Well it's been a minute, but we're back in the shed working on the GU build.
In this episode we're going to fully kit out the inside, put some new products in there
and just tidy up some of the old things in there.
We're going to finish accessorising the outside, get all our weights how we want them and then
we're going to shoot up to our mates at EFS and get the suspension dialled in mint.
And I reckon by the end of this episode, we might be able to take this thing for a sneaky
four wheel drive.
We're going to start with the back doors and there's a bit of hidden space in these things
behind these door cards.
I've got these products from Horizon Touring, replacement door cards with fold down tables
and they've got these little voids in here so you can put your condiments, sauces, salts,
peppers, all that sort of thing.
This one's even got a built in chopping board which is super cool, so make your lunch on
that.
And both these tables have got a built in light up the top here, multi-colour, so that's
awesome.
Any time of day you want to make a snack, you're good to go.
They're going to be super easy to fit and like I said, they use some wasted space so
you're going to get these things on.
I've got the door card off now, ready to cut the holes for the storage compartments on
the new one.
I'm going to tell you what, the instructions that come with all these products are super
easy to follow, so hats off to the guys over at Horizon Touring, they're really making
our job nice and easy.
Everything's plugged in for the light and I'm going to try and speed this on.
And what you've got to do with these top bolts, because they're super close to the light,
is poke them through first and have the bolts fully out so you can sort of slowly wind it
in.
A bit of a tricky process but you get the top three on there and hang it up and then
the others are nice and easy to do.
Well I started with the little one first and I reckon that looks awesome and it's so good
it's got a built in chopping board.
Now it's time to get this other trim off and get the big table on.
I'm just running the wire here for the light on top of the table and putting it through
the factory little thing here like we did on that side.
It was a bit tricky this one because it's a bit tighter so what I did is I got a bit
of wire out of the welder, poked that through as a feed and I'm just taping my new wire
to it.
I'm going to use that to pull it through and then we'll bring the wire over here ready
for the light.
How good?
Now it's time for one last finishing touch, a rear window organiser.
I got both these back door cards on and how good does this look?
I got a table over here for cooking and stuff, nice little chopping board over here for preparations
and the best part I like is some wasted space in the doors I'm now using, I can stick condiments
in there, sauces, salt and peppers, have a go at this.
Window, you're not going to see much out the back when you've got a big tyre and stuff
on the back so why not use the space too?
This is more space I wouldn't use, put utensils in there, knives, clippers, tongs, all that
sort of stuff.
I reckon all these things have made really good use of the space that I would never really
use and actually when I pull up on the side of the road for a feed it's going to make
stuff so easy.
A lot of you guys have definitely noticed about the dash and the G and I've seen in
the comments, when are you going to replace this thing, look at it, it is all sticky and
gross.
There's a 5 cent piece jammed in there.
Well, tonight is the night, I've got a new one in the back, typical me though, I've been
putting off buying a brand new one for ages and they're not too expensive, like 800 bucks
but it's just a lot of money to spend on something that's, you know, it's not going to do much
for the car on the track so anyway, out in the shed, it's night time but it is nice and
cool so that's why I'm out here doing this dash because it's even stickier in the sun.
I'm getting there, I'm getting the job ticked off.
Next day, it's daylight, I've got the old one here, all yuck and gross and here's the
new one, bit nicer, much nicer I'm going to say, about to throw that into here, I've given
under the dash a full blow out, sprayed a little bit of Brunox in here as you can see
it's sort of treated the rust, didn't really want to pull that out and paint it, it's a
big job, there's lots of stuff attached to that, it's never really going to rust anymore
so a quick little bit of Brunox and the new dash is just about ready to go and wish me
luck, it goes in okay, I probably should pull the steering wheel off but I'm going to try
with it on first.
I've got the new dash in, all the trims on, I've even got this flash little panel here,
never used to have that before, that's where I'm going to hide my secret stuff, you've
probably noticed I haven't clipped this centre piece of the dash on yet and there is a very
good reason for that, I've got something quite special to go on there, it's on the bench
over there so come with me and we'll have a look.
This is a brand new head unit from Polaris, no one's even tried this one before, I'm their
guinea pig for them and it actually comes with a whole replacement fascia so this is
the standard one, this is the other one that houses the new screen and I'm keen to get
this thing in there and try it out.
Well this is a little bit flash for a bloke like me, I don't know if many of you know
this but my GQ doesn't even have a stereo in it, my theory there is spending money on
a stereo isn't going to get me further up a track but the GU is a little bit different,
it's going to be my touring rig, I want to do some long distance travelling in this so
I fitted the Polaris and I don't think it could have been any easier to fit, come with
a full plug and play harness, straight to the Polaris, straight to the GU loom and this
new surround, all I had to do was put my factory clips on here and it popped straight
in and I reckon that almost looks like factory fitment, nice big screen, it's got a couple
of apps already loaded on it, one I think is going to come in super handy is the Explore
Oz Traveller, that'll be awesome when I'm off roading out touring, another cool thing
is Apple CarPlay so when I'm on these long drives to keep me awake, I can call me mates,
text me mates, even got Spotify so I can listen to some podcasts, I'm not going to know myself,
this GU is going to be luxury compared to my GQ.
Well the first trip of the GU is coming in hot and it's sort of one step forward, two
steps back, there's a spacer I need for this transfer case gear I never got, some patrols
have them, some don't, so I finally got one in here, goes on behind the circlip to stop
this gear floating in and out, while I've got it out I'm replacing this seal and I had
a bit of a weep here so I'm not sure whether it was from this or this, I've also put a
Welsh plug in there, these don't come with a Welsh plug to block that off, so I've got
the old seal out, and a good little trick I've got actually is if you know behind the
seal is a hard surface, what you do is you punch a tech screw through, you've got to
make sure, it's got to be a seal that's got steel in it, so you can see that brown bit
of that steel, and as you screw it in, as long as where this screw is screwing in isn't
soft, I had an old gearbox I checked, they'll actually wind in and it pops the seal out
because as you can see there, with the adapter on, it's probably like, as deep as my finger
there, probably about 75mm deep, you're not going to get anything in to pry it out.
Now we've got to stick the new one in, get that transfer case back in, and I'll finally
start butting up some things under here, so get the tail shaft in, still got to plumb
up all the locker lines, I raised this up so when you lift the trolls, you've got to
lift the brake proportioning valve up, and we're getting close, but also the first trip
of the G's getting very close, scary times.
You might have noticed in one of the early episodes, when I started the car, I had some
hoses hanging here, and it actually caught this viscous hub, and broke it, so I'm taking
it off now, and I thought, if I've got to replace it, and that one's broken, I might
as well do an upgrade, so what we do here, is we get the fan off the petrol V8, BMW X5's,
so that goes on, and a new viscous hub, so it's a bigger fan, bigger hub, fan is all
fitted up to the hub there, it's quite big, you can see the difference here, and this
hub is also a lot bigger too, but, just looking at this, this is how broken the other one
was, obviously how free it was spinning, and a lot of play, in and out, this one here,
you can't spin it all, obviously filled with oil, and when that gets hot, it's going to
totally lock up, but that's locked up, this here, no good.
So, we'll get this big dog fan on, and let the GE run for a bit longer than it ever has.
Last episode, you guys probably remember me talking about taking this snorkel off, and
changing the guard, and over here is exactly why, obviously the M57's intake and turbo
is on the driver's side, so I've got this stainless snorkel, a new air box there, today
is the scary part, I've got to line this template up, and hack a hole in this perfectly good
guard, so wish me luck, and let's hope this template is in the right spot.
I've got the template on, and I've wrote myself a little note here, don't stuff this up Jesse,
you only get one chance at it, and that's kind of true, so what I'm going to do here,
this is the line of the template, probably going to cut about 10mm inside at first, then
try and fit the snorkel on and see, go to the texture and mark where I've got to cut
more and less, and then hopefully, working from about 10mm up, we should have a nice
and tight hole to slide the snorkel in.
So I've cut out to about the edge of the template, and I've got a bit worried here because there's
a massive gap at the back, but what you can see is the snorkel is not lined up with the
window, so I think what's happening here is I need to cut a bit more out of here so then
the snorkel can roll in, I'm just going to take the inner guard off from the inside,
I've taken the wheel off so I can get in there and have a look at what's going on, and where
I've got to continue to cut, this is where it gets super tricky, you definitely don't
want to cut too much out, because it's going to look bad.
Snorkel hole is all cut in, there's a pretty nice gap the whole way around here, bit of
pinch weld will take up the gap, so that's all good.
The thing I really like about the snorkel is if you look up the front here, he runs
parallel with the windscreen rail, but some of them hang out more at the bottom and angle
up, but this one's nice and square to the windscreen, looks awesome.
One thing I'm thinking about here, is I might get this snorkel powder coated black, I'm
not too sure, I reckon it'll fit in good with the Ruzzlar bar work, but the reason I didn't
do that before I fitted it was I had to slide it in and out of the guard that many times,
it would have scratched the nice black powder coat so many times.
So what I'm going to do is run down to the shop to get a bit of pinch weld to put around
the outside, and if it looks alright I might leave it, but if I want a powder coat of black
I might drop it off and then do the final fitment, and I'll show you how it looks.
Back in the shed doing some fiddly jobs, and I'll tell you what, anything that says custom
takes you a long time, I've been here for probably half the day doing this.
Got the auto cooler mounted up, obviously I'll nut set these and round all the corners
and stuff, but this is all tacked up ready to go.
So hopefully I can finish fabbing up those mounts today, paint them, get them mounted
and get some tails, like some lines on there with some tails, then I can finally fully
fit up the intercooler and put the hose clamps on and what not.
So yeah, but anything that says custom, well this whole car is custom, takes a long time,
like I said, pretty much half a day just to make two brackets, but they're made now, and
they should be good for the life of the car.
Auto cooler is all on and painted up, now a lot of people take this fan out and put
the intercooler hard back, but I've actually put the intercooler in front, it's a Fusion
Fab kit, it's Ash's idea, but what the idea is, you've got an auto cooler here which is
running at about 80, 90 degrees sometimes, and that is behind your intercooler, so your
intercooler is getting the cool air first, and then the hotter stuff is behind it.
But it fits in there nice and perfect, it's a hydraulic cooler out of an old Bobcat, and
same thickness as the fan, made up a couple of mounts, it's quite sturdy, this line runs
under there, and the top line up there runs all the way under here and pops out here.
So nice and tidy, should work out well, I've got these fittings over here, they are just
an alloy weld on dash 10 fitting, so that will get welded to the factory line, and then
I've got this hydraulic fitting here which I'll push the hose onto, and the auto will
hopefully stay nice and cool, and I'm giving it a hard time, not that this thing is going
to come a hard time, because it's going to be a good car, I'm going to look after it,
but I'm making progress, that was a mission, using auto cooler, put it on, plumb it up,
quick job.
No, it wasn't, custom means a long time.
I finally got the back sorted, as good as it's going to be for now anyway, finished
off fitting these Horizon Touring cars, now I've tried to keep it simple, light, and the
weight down low, so I've just gone with a simple modular drawer, and the best thing
about this is, I've got the exact same one on my GQ, so for bigger trips like Cape, I
can probably double stack them and have two drawers when I need more space, and also on
the note of keeping the weight down nice and low, I've gone with the Clearview Expander
Slide, so it's not a drop down slide, one, to save a bit of weight, and two, it's a really
cool thing, it's actually why it's called the Expander Slide, as this is pretty much
a one size fits all fridge slide, it's an expander, so as you can see there's two layers
of steel here, you can adjust it width wise, and you can do the same length wise, and something
really cool too, is the middle here, there's no floor on it, so they've taken weight out
of it where they can, so it's still pretty light for what it is, super handy, weights
down nice and low, pulls out really far, I can get into my fridge, sneak a couple of
beers out nice and quick.
Another thing I pinched from my GQ was this fridge cage, the beauty of this is when I'm
fully stacked up for big trips, I can stick swags, bags, everything up the top there,
I can pull the fridge in and out, nothing's going to fall down behind it, so there's going
to be no dramas when you're fully stacked to the hills.
Rightio, the GQ is now driving, it's actually registered, and it's first drive I've had
in mind for a little while, I'm actually going to head up and see my mates at EFS, they're
going to give me a bit of a run down on these MRP shocks, and we're going to give them a
bit of a tune up, so this thing is riding super comfy.
G'day Cole, I made it!
You did!
First drive in the big GQ.
It's on the road.
I leave for a trip in a couple of days, so I thought I'd come and see you.
Apparently you're the suspension expert, and we'll see if we can tune up these MRPs.
Yeah, no worries.
You've come for us to give your suspension a tweak.
Well let's have a tune of these things, we'll get them sorted, and a little treat for you,
we'll take you over to the shock shack where the dyno is, and show you what each little
click does on the dyno.
Oh, that'd be awesome, I've always been interested to see what those clicks actually do.
All right, let's get it up on the hoists.
Let's have a look.
Well Cole, I threw these shocks in straight out of the box, that's why I've come to see
you, the suspension expert.
I'm hoping you can tell me what these adjustments do, and what I should do with them.
Okay, well I've had a quick look, and these were set at full soft, and in the box they
can come at anything.
So I recommend wind them all the way out so they're at zero soft, and then just wind them
halfway in.
Yep, about halfway.
About halfway, just wind them in, count your clicks, count them in.
I always go 10.
And the same at the bottom.
I noticed it was all the way at full soft, so just move it in halfway.
And start from there, and you can work back and forth.
And then you can go right, okay, how does this feel?
Yep, yep.
What do I need?
You go for a drive, you try it, and then you get out, a couple of clicks.
But like I said, we'll have a look on the dyno, show you what it does.
That'd be awesome to see what it actually does.
Righto, Jess, come on in.
This is the shock shuck.
This is a pretty cool little place where the magic happens.
Where all the magic happens.
So what I'll put on you is we've got like...
MRP apron.
There you go.
Just so we don't get you dirty.
That's awesome.
So if you come over here, we've actually...
And that actually simulates the shock working.
It does.
I can run you through it.
Yeah.
And we'll set that as half and half as what we did on your car.
And as you can see, we've actually got a gauge connected to the cylinder.
We're going to be monitoring the pressure build-up in the canister.
How about I give it a run?
Yeah, I'm keen.
This is so cool.
Righto.
So that's set, ready for our test.
Yep, full droop.
Yep.
What we'll do now, it'll give it a few strokes to bleed it out.
Yep.
So, which every shock, you know, some people say, oh, it feels soft, first thing out of
the dryer.
Well, it does.
Sometimes they've got to bleed out.
It's hydraulic.
It's what happens.
Yeah.
This speed here, we're just going up to half a metre a second.
Which is a fair rate.
Three inches of travel.
Which is, that's what we set our standard at.
Yeah.
We ran three clicks of compression, as you can see.
It's brought up.
It's changed quite a bit.
It has.
It's changed quite a bit.
So it's brought it up.
It's crazy that I didn't think three clicks would change a shock that much.
Hang on.
Let's do two clicks.
Yep.
Look, that was two clicks.
Yeah, two clicks.
And it's changed it heaps.
Yeah.
That's crazy.
Yeah.
It is.
So, yeah, two or one click.
You will notice some difference.
Yeah.
I did not think it would make that much difference.
I thought you'd have to go a lot of clicks.
With just two clicks of adjustment, the shock's response changed by nearly 100 newtons.
And with 36 levels of adjustment, you really can impact the response of these MRPs.
That's the whole idea of adjustment.
Yeah.
Set it in the zero, get a feel for it, and then start to play with it.
And enjoy your car and have a bit of fun playing with your suspension.
Yeah, definitely.
Yeah.
This tool enables us to quantify what we say.
Yeah.
Exactly.
No, I like it.
That's awesome.
Yeah.
Jess, thanks for coming in, mate.
Mate, thanks for showing me how to adjust these shocks.
Yeah, pleasure.
And special thanks for taking me in the shock shed.
Oh, mate.
I mean, that's quite...
Not many people get to go in there.
Nope.
And I was so surprised what two clicks on that shock would change in that graph.
Makes a big difference.
I'm going to have a bit of play with these up in Cape York, and I can be riding on a
cloud by the time I get back.
Thanks again, mate.
Appreciate it.
Thank you very much.
Good to see you.
Wish me luck.
I think I'll need it.
No, you'll be all right.
Well, it's finally done.
And for you people with a sharp eye, you might be noticing it looks a little bit used for
some of this new stuff.
And that's because I took it on a little shakedown run that wasn't that little.
This thing has been to Cape and back, and I'll tell you what, I couldn't be happier
with it.
I definitely had a couple of teething dramas, but we sorted them out, made it there, made
it back.
I think I'm in love.
I actually can't believe it is done.
It's a pretty surreal feeling to see this thing sitting behind me.
I can't believe, just under a year ago, this thing was sitting in my yard as a bare chassis.
Now, in the lead up to the Cape trip, it was pretty crazy, and I probably should have filmed
a bit more, but I was pretty much living in the shed, running on about two hours sleep
a day for the last three or four weeks to get it ready.
But it was a pretty surreal thing.
I honestly only had about 300 k's on this thing since I got it out of the shed before
I left for Cairns, and it made it to the top.
Had a heap of finishing touches to do before Cape, and probably one of my favorites was
this brand new set of Kumo muddies I put on.
I'll tell you what, these Kumos work super good on the wet tracks up at Cape, but I reckon
they actually change the whole look of the car.
I reckon it looks pretty tough with these on there now.
Now, I know you guys are probably sick of looking in here, but one thing you guys haven't
seen is this completely done.
We've got the Fusion Fab airbox in, we've got a big Boss Vent catch can, got the fan
shredder on, all the aircon lines run, and I'll tell you what, it actually looks pretty
good in there, almost like factory fitment.
One of the finishing touches under here was the Boss Vent catch can.
Now, the reason I went that is because these M57s breathe really, really heavily.
The beauty of these things is the flow rate is pretty much twice as much of any other
catch can on the market, but they're not twice the size, they're still super compact.
And they've actually got an in-cab indicator for when these filters are getting blocked
or it's full of oil.
So, that come in super handy up Cape, and it kept the M57 breathing super clean.
Probably the biggest thing I've done throughout the whole build is the M57 conversion, and
now I've driven it, I can finally talk about it.
I'll tell you what, it's probably the best powered Patrol I've ever driven.
The fuel economy is awesome, made it with that six-speed auto, it is so smooth to drive,
the power delivery is super linear.
I had a couple of little teething issues up at Cape, but that's going to be expected after
a motorist's had it for five years, but I couldn't recommend this conversion enough.
It is super simple to do, the fuel figures are awesome, the power figures are awesome,
and it's all still on a standard engine with just a remap, so fingers crossed this thing
should be pretty reliable.
Now, don't be turned off by how long this has taken me.
You know, I was sort of limited on money, I'd buy parts when I need them, and also I
had this motor sitting around at the start, you probably remember I said I was going to
put it in the GQ with the manual.
So, if I was to do it again, I'd probably do things a little bit differently.
I've got an E70 gearbox and an E53 engine, I'd probably go E70 as a collective, much
easier to get the auto to talk to the engine then, and I'd go a later model, a CRD car
to put it into, less worrying then, and the engine can actually bolt straight in, there's
no welding at all, makes the conversion super easy.
But, all in all, I'm happy with the package I've got.
As you guys probably saw on some of the previous episodes, I did have a couple of dramas with
earthing issues and ECUs and stuff, but don't let that scare you away from the conversion.
The original ECU I got was from a place in the UK, and they were supposed to take a thing
out called the emulator, which deletes that earthing issue, and they didn't.
So, that's what caused it, I've got that out now, did plenty of winching up in Cape, right
down in the vaults, started every single time, all those things are sorted.
Another last minute addition before I left for Cape is I threw this pacemaker exhaust
on.
Now, these things are full stainless, but they're actually ceramic coated in this pacemaker
gold, so all that Cape dust did not stick to it.
And another thing I like is the centre muffler in this is quite big.
Obviously, being a wagon, I didn't want any drone in those big, long highway drives.
It's nice and quiet, but then you want to get up and be naughty, it does sound pretty
good.
Another thing that I had on for Cape that you guys can't see right now is I had a roof
rack up top, nice alloy job to keep it light, and on that, I had a 270 degree EFS awning.
Now, I've never had so much luxury while camping.
It was super easy to set up, had lights inside, had my swag down the side, kept me nice and
dry, and at the back, covered the back doors and the horizon touring table.
So, when I was doing cook-ups with the crew, I was nice and dry and had lights above me,
made life super easy.
Another sneaky little thing I had was crock hinge fold-up brackets.
Now, we all know 270 degree awnings are pretty big and they can hang outside of the car,
so I put it on some crock hinge fold-up brackets.
Basically, when I wasn't using it, it folds down flat on the roof rack and it's out of
harm's way.
It didn't cop any damage the whole trip, and it wasn't just the EFS awning that got a proper
workout up at Cape.
I tried out the new VividMax EFS lights, and I'll tell you what, these things were super
bright, very impressive them, and the Recon winch got me out of strife every single time
I needed it.
Well, there you have it.
The GE was finally done and out of the shed and it's done its first pretty decent shakedown
trip, and I think I'm in love.
Obviously, it's not completely finished.
She probably picked up, hasn't got a new guard on yet, and I haven't painted it.
I did read you guys' comments.
Obviously, just ran out of time, so it might be the end for the GE build, but for now,
I just want to say thanks to all you guys for following me along on the build, watching,
commenting, all those sorts of things.
So, if you've got any extra questions or any extra mods you think I should do, check them
in the comments below, and I'll go through.
But for now, that's all we've got time for.
Tune in this Thursday on 4WD217, and you'll see this thing in action.
We are back.
That's Jesse Gleeson, ladies and gentlemen.
In what is the bucket list destination in Australia?
Holy moly!
Cape York.
It's our first time in Cape together and we're both in new builds.
Yeah!
And it's pretty clear that this track has not been driven this season.
Magic.
How lucky are we?
This is insane, man.
Get ready for a bang.
Put your head in so you don't hit it.
Oh yeah, true.
Come on.
So, I'm about to drive into probably the deepest river in the Cape right now
that's croc infested.
