Im Bored and Sad...Lets Build A Gaming PC!

Tech Care
3 followers
6 Video Views·Mar 14, 2026
Usually when I get bored, I like to build an RGB PC to pass the time because it's fun
and it cures my boredom looking at the shiny and fancy RGB lighting.
But today, I am bored and sad, so we'll be building a blacked out zero RGB PC instead.
If a little bit of thermal paste and coil whine can't cure boredom and sadness, then
nothing can.
Kicking off with the CPU is the Ryzen 7 9800X 3D processor, which is still the best gaming
chip in the market.
And we're gonna be tossing that in the brand new ROG Crosshair X870-E Dark Hero.
This has the new AIO-Q connector on the side, which allows you to install ROG's new wireless
AIOs.
I actually had the chance to check this out firsthand at CES earlier this year, and all
I gotta say is this right here is the future, ladies and gents, okay?
ROG is paving the way.
Basically, this little connector right here on the motherboard shares all the information
from the AIO cooler.
I mean, we're talking about fan speed, pump speed, RGB lighting, I mean, everything is
communicated from the AIO to the motherboard through this little connector, completely
eliminating the need for any additional cables.
You're gonna get this clean, wireless, and minimalistic look from the front.
Damn!
I'm excited.
I'm excited for the new AIOs.
Now, for storage, we're gonna take it a little easy and just toss in, you know, three 8TB
M.2 SSDs.
What?!
We're not going overboard here, okay?
We got the WD Black SN850X Gen 4 NVMe drives for a total of 24TB.
I mean, we do have the slots on the motherboard, so why not take advantage of those, right?
A wise man once said, if there's an empty hole, it must be filled.
And we are certainly gonna be filling these.
Okay, CPU, contact frame, and storage devices have been installed.
Now, for the operating system, we're actually ditching Windows 11 because that is currently
a hot mess.
Instead, we're gonna be going with Windows 11 Enterprise LTSC, which stands for Long-Term
Servicing Channel.
Basically, this is a cleaner version of Windows 11 without any pre-installed software, no
ads, and way more stability compared to the default version of Windows.
People even went as far as to compare the stability to Linux.
Usually, these keys go for like $295, but lucky for us, VIP or cdkey.com sells them
for less than $17, but you gotta make sure to use the code TS25, which unlocks the cheapest
price.
Activating the key is the same process as before, just go into the user center, navigate
to the orders, click on the view button, and then copy and paste the key into the activation
settings of Windows, and you can now enjoy a fresh, clean copy of Windows 10 or 11.
Now, for memory, we're not doing anything too crazy, we're just gonna toss in a measly
128 gigabyte kit from G.Skill.
After all, we do gotta watch how much we spend given today's market, so I figured we would
take it easy this time.
You know, someone once told me that there is a correlation between memory and happiness.
The more gigabytes of memory you have in your system, the happier you are.
I'm not sure if there's any truth to that, but I guess we'll find out at the end of the video.
Okay, we are now ready to move everything inside of the case that we are building in
today, ladies and gents, the Antec C8 Curve wood.
That's right, we're finally getting some wood action, ladies and gents.
It's been a while since we've done anything wood-related.
The C8 curved wood is somewhat similar to the original C8, except with the additional
single-piece curved glass and the wood accent panel on the side.
You do get support for back-connect motherboards up to E-ATX, and tons of space for cooling.
We're talking up to dual 160mm fans on the top or bottom, and up to 360mm on the side.
And I bet you guys haven't seen an AIO quite like this one.
This is the Vortex View 360, also from Antec, but check this out.
It has a 5-inch IPS rotatable display.
I swear, these AIO companies are constantly trying to one-up each other, and it's great.
It's like someone will come out with a 4-inch display on their AIO, and then the second
company will come out and say, well, we have a 5-inch display.
What now?
And then the company after that will come out and say, well, we have a 5-inch display
too, but ours rotate.
Can yours rotate?
And then as a result, you get this endless cycle of companies trying to one-up each other,
which is, I mean, better for the consumer, right?
So not only does this one rotate, but there's actually an RGB back-glow system.
This entire area lights up and adds ambient lighting across the pump block.
I'm actually low-key excited to see how this turns out once the build is done, but because
we're building an all-black, zero-RGB build, we're going to eventually turn this off, obviously.
I guess I can give you guys a bit of an update on our new 83-piece electric screwdriver kits.
When I first announced this on the last PC build, it got sold out within the first 30
minutes.
I mean, granted, we only had like, you know, 25 units, but it's obvious to me that you
guys are very interested in it, so we're actually working on restocking more.
We're getting in about 200 more units in the middle of March, so hopefully by the end of
March, our store will be completely restocked with these.
I know a lot of you guys were bummed that you couldn't snag one, so apologies.
Like I said in the video, it was a test run.
So yeah, once we're completely restocked, you guys can find a set on our store, techstoreshop.com.
I'll drop a link to it down below.
Okay, so this is interesting.
Antec is recommending you install the AIO in a certain orientation, depending on what
CPU you are going with.
So if you're installing an Intel CPU, you would have to install at the 6 o'clock or
with the tubes facing the bottom.
And if it's an AMD CPU, they recommend installing at a 3 o'clock orientation.
So basically the tubes facing towards the right.
And they're doing this to make sure that there is even heat distribution, because we all
know that both Intel and AMD CPUs have uneven heat distribution based on their IHS design.
I can actually play with this all day.
It's kind of addicting, I'm not gonna lie.
But anyways, AIO is finally installed.
And I'm actually really happy that Antec didn't throw in RGB fans on the top.
Believe it or not, actually RGB fans are not really focused on acoustics and performance.
Because we don't have the lighting element on it, Antec can focus more on the performance
side of things instead of aesthetics.
But even with the AIO installed, we definitely have a lot of empty space around the case.
So I say we fill it in with more fans.
Specifically the Antec Novas, just so we can stay consistent with the AIO fans up top.
These are also non-RGB.
So I'm thinking, since we already have three exhausts on the top, we can add three more
intake on the bottom.
And just to fill in the empty slot over here, I say we add in three more intake fans, which
will give us a bit of positive pressure.
But I feel like we can kind of balance that out by adding one more exhaust fan in the
back.
Bam!
Ladies and gents, it is coming together very nicely if I say so myself.
Although, now that I'm looking at the fans inside the case, I'm a bit surprised to see
a noticeable gray colorway.
I thought it was going to be like a pure black set of fans, but I mean it does add some subtle
contrast in there, so I'm not too worried.
The only thing I do want to complain about is that I wish Antec made reverse blade fans
for these because, I mean the sticker and the cables over here look absolutely atrocious
and it's going to take away from the beauty of the build.
So like all the intake fans for example, you're going to see the ugly backside of the fan
and there's really nothing I can do if I want to set these as intake.
But other than that, I think the rest of the build looks absolutely gorge.
The only thing left to do is hook up the power supply and the GPU and then we can fire it
up.
So for the power supply, we're actually going to be going with the K&N 1000 from PC Cooler.
Believe it or not, this is actually the best value 1000 watt power supply in the market,
coming in at just $100.
There's also a 10% discount code right on Amazon, bringing the price down to $90.
I mean for that price, you get a fully modular gold certified power supply with an included
Gen 5 12VH power cable.
And I don't know if you guys are familiar with the PC Cooler brand, but they're actually
an OEM company and they manufacture a lot of the power supplies, cases, and even coolers
for other well-known brands.
They don't just do power supplies.
So if you guys are flipping PCs or planning on building your next system, definitely check
out their power supplies because they got the perfect balance between price and quality.
They also have lower wattage power supplies from 850 watts all the way down to 650.
Unfortunately, because the power supply is priced that low, you don't get any fancy braided
cables or cable combs.
I mean, you get this monstrosity that has a gap over here between the cables and this
is going to completely throw off the look of our system.
So we're going to cover it up with a Hydra cable extension.
This is super clean.
It even comes with some subtle RGB accents, but I'm not going to be plugging in the RGB
cable so we don't have to worry about the RGB lighting.
So this basically snaps in here, pull out the cable here, and just snap it in.
Bam.
There you have it.
Super clean, super minimalistic.
It is going to blend in very nicely with our system.
You know guys, now that I'm thinking about it, I think the color of the fans are going
to match some parts of the GPU, like specifically the top shroud of the 5090 Astral because
it's got a bit of a gray color scheme to it.
So I think it's going to work out in the end after all, but there's only one way to find
out.
I mean, not exactly, but I want to stay close enough, right?
The card's going to be slotted in horizontally, so this part actually has more of a gray accent
than anything.
Can someone tell me why this case doesn't come with a sag bracket pre-installed or at
least an option to add one?
Because the Astral was sagging harder than my spine after carrying Aria in the finals.
In the finals, in 4K settings, the CPU peaked at 65 degrees Celsius while the GPU peaked
at 62C.
I mean, there is a ton of air moving through the case, so I'm not really surprised with
how low the temps are, but I was surprised at how quiet the system was despite having
10 fans in there.
Luckily, the Astral did come with its very own little sag tool that I tucked underneath
the card and it did seem to do the job just fine.
But overall, very, very happy with how the build came out.
I think this is easily one of my cleanest non-RGB builds that I've done on the channel
and easily the coolest as well.
Luckily, all the components played very nicely with each other in ROG Armory, so I was able
to control the lighting easily and even though red looked absolutely menacing, I had to turn
it all off since we were doing a zero RGB build.
I mean, it's one thing to stay away from RGB puke, but shouldn't there be at least one
source of light inside the case to kind of shine on your components?
Well, that's kind of where the back glow lighting comes in clutch from the AIO.
I'm able to select from three different effects and change the colors to anything I want,
but since I wanted to add a bit of light to bounce off the components, I set it to fixed
white.
Now I was able to see the inside of the case, so during the day I can turn off the lights
and at night I can enable the back glow so it's not super pitch black.
Now the bottom of the case, specifically underneath the GPU, could use a white LED strip as well
so the lighting inside the case is more balanced, but I mean, this is still miles better than
not having any source of light inside.
But aside from that, I absolutely fell in love with this screen on the pump, you guys.
I don't know why I prefer longer and flat screens as opposed to the curved screens that
you see everywhere, maybe I'm just weird, but I think personally the content looks so
much better on a wide, flat screen.
You can of course upload your very own custom videos, images, GIFs, or this is actually
new, you can search GIFs online within the app and upload it directly to the screen.
Now if you wanna add system info on the screen, you can also do that through the stacked layout
or compact, and you can customize the orientation and size, but personally, I don't like having
text over my content, so I just disable it.
But yeah, overall a very fun case to build in, tons of space to fit in high-end components,
and the curved glass is absolutely stunning.
It's unfortunate we don't get a GPU stack bracket with the case, but I mean, most high-end
GPUs do come with their very own one, so it's not really a deal-breaker by any means.
But the questions still remain, is my boredom now cured?
Absolutely.
Am I a little happier than before?
You can say that.
So I would definitely say with confidence that this build was a success.
If you guys wanna check out the case or any of the parts I used, I'll drop a link to it
down below.
Thanks for watching as always, and I'll see you in the next one.
