Installing Kitchen Faucet How to Clean Out Water Lines

VideoJoeShows
86 followers
32 Video Views·Sep 23, 2026
Save your money https://studio.com/videojoe/homefix?c=GxwU4CK7
Installing kitchen faucet how to clean out water lines is what this DIY howto video is about. VideoJoe is almost done with installing a kitchen faucet but he still needs to do a very important step of the kitchen faucet install process for sure.
Save your money https://studio.com/videojoe/homefix?c=GxwU4CK7
Watch & learn as VideoJoeShows you what VideoJoeKnows...installing kitchen faucet how to clean out water lines. Nice!
Okay, I got the water back on.
I've turned it on slow.
I flushed the toilet, seemed to be okay.
The faucets in the bathrooms, I've shut those off now.
And now I wanna, remember on the right hand,
the cold water side, I tried to shut it off,
so I'm gonna open that just a little bit,
even though most of it's open,
and I've gotta reach under there carefully
and turn the hot water on too.
That's my next step.
Okay, I've got the valves on,
so the good thing is I'm not seeing any drips down there.
I was hoping I wasn't going to.
Okay, now I can turn this on.
Can I?
I can turn this on.
I was gonna turn it on with one hand,
but knowing me, the water's gonna go whoosh
and right out on the floor.
So, oh, wow, that almost went out on the floor.
Okay, that's the cold water, that's the hot water.
See, there's air in the line,
and if there was anything loose in there,
this would flush it out.
Does that make sense?
Okay, now, now I can, you know what?
It said run it for 15 seconds, didn't it?
And look down here.
You see that little black stuff?
I had this all cleaned out.
That little bit was in the water,
and I'm glad I'm flushing this out
because that's gonna prevent my aerator
from getting one of those little things in here
and then you see one of the lines
off at a wrong angle or something, you know?
It said 15 seconds.
You can count it or whatever.
It seems like the cold water line
is just a hair stronger than the hot water,
and I believe my gate valve underneath the sink
is on all the way, but I'll check it one more time to see.
I just don't like messing with those gate valves anymore,
and I have to because the neck of the gate valve
going into the valve itself inside the wall,
that is plastic.
That little neck is plastic.
I don't know why they did that
because if you can imagine 20 years later,
even 30 years later, you go and turn that off or on,
and you can't turn it off all the way,
and you think, ah, I'm just gonna tighten
a little bit more, snap, crackle, pop,
and you break the handle off.
I've done that before in Maui,
and I had to run to the store,
had to shut the water off to the house,
had to drain the system a little bit,
and then had to replace it and put it back on.
Hey, I put a new one on.
That's part of my video content too, okay?
And I got it fixed, but nowadays,
I'm always kind of leery of these plastic handles.
That's why the ones they do nowadays,
if you go to the store,
you can still get the same kind as before,
and you have to turn it, turn it, turn it,
turn it to off, turn it, turn it, turn it, turn it to on,
or there's one that's just off, on, off, on,
and they're designed for water.
They generally are in the plumbing section.
I love those because of the reason why I'm telling you, okay?
All right, I'm gonna check that water valve one more time,
and then I'm gonna screw this back on.
