Build That House...Framing Details

VideoJoeShows
86 followers
15 Video Views·Sep 16, 2026
Don't throw your money away... https://studio.com/videojoe/homefix?c=GxwU4CK7
Build that house framing details is what this DIY howto video is about. VideoJoe is back at the jobsite just like he promised & this time he wants to show you a very important framing detail that he doesn't want you to miss.
Save your money https://studio.com/videojoe/homefix?c=GxwU4CK7
Watch & learn as VideoJoeShows you what VideoJoeKnows...build that house framing details. Nice!
Well, I'm out at the job site and I'm using my cell phone the Sun has just gone down
But I think there's enough light here to make another video. I just made a video of
Explaining about the concrete
Floor here and the cuts and the air conditioning ducts and the pipe over there and a couple other things
So you just have to keep watching my videos and take it take a look at that one
Will you and it will be before this one or or you know?
Main channel page
Playlists and scroll down to how to build a house. Well this episode
We're gonna talk about this framing a little bit more now that they have a little bit more this framing put together
I can see they're not entirely
Just yet, but I'm gonna I'm gonna talk about a couple things here and see here. Here's a bracket here
Look at this bracket. I wasn't quite sure how they were going to attach these brackets onto this onto this rod
Do you remember this rod goes down?
all the way down into the
Concrete down here. This rod goes down down in here
Remember it only came up a little bit and so what they did is they put a coupling right there
This is a six by six column here at two by six next to it
They've got those screws bolted into that that's gonna kind of hold the house down in high winds
Earthquakes stuff like that. Does that does that kind of make sense? That's and that's what that's for
I've seen them look a little different than this the house where we're at is a lot bigger than that with through bolts going
All the way through this thing
This one's a smaller version and I guess that's all they that's all that was required and see these big old
Straps, they've just folded those down when they get ready to
Frame that they'll flop those back up and then they'll bolt that against
Six by six to see they did they've done that over in here. See see them all here
In fact, they got some big huge bolts over in here
Okay, see see these big bolts here
Look at that look up big dad is
Okay, there's some around there right over in there and and they'll use some sort of bracket like these
Just a little bit bigger one and that will that will help hold
The walls down where the garage is and and stuff like that because there's not much wall in
Each one of these little sections is there you see and that that will help tie everything down
to the existing
Concrete stem walls down into the footings these these brackets here go all the way down
Further down into the footing see there's some big old huge beams over there
See that some of those beams are gonna probably be for the garage and that's probably why they poured this
They're not done with the framing just yet
There's still some perimeter walls in the front and the back they still have to do and and they were they were like hey
Let's get it. Let's get the concrete guy out here
The concrete guy was was readily available and we wanted to pour this concrete. They poured this concrete
So so see now now they can they can bring their wood out here
They can form up all of this right down on top of the concrete
Floor can't they and then tilt it up and work off of that. That's kind of slick
Now I've also seen it where they haven't poured the concrete and they've just have the ground or the compacted
Gravel
sand
mixture and
Then they've built walls on top of that folding them up built everything
you could build all these walls and the roof and and
The truss systems and all that and then pour the concrete. I mean it just depends
whichever
Whichever guys pouring the concrete and and and how the general contractor wants it
So see this bracket that ties down there and this this stuff will be shown on the plans, okay
See, here's another bracket here. They're kind of doing the same thing. Aren't they you see there?
they've got that and they've got that screwed onto there and
We'll walk around well, I
Was gonna say walk around the perimeter and you'll see wherever they have them again. See there's another one right there
Here's another one that they're gonna put here. There's one there. There's some more around there
Let's just go up and let's let's check out these around the perimeter. This is all this is all we're talking about right now
Okay, there's out that one there and like I say they have different ones of these
You just have to look on your plans. Whoever drew your plans. Whoever the structural engine engineer is he'll he'll
design it and
detail it and
And do all that with whatever brackets he wants you to use and then you'll order those brackets
Whatever it shows on the plans to see here's another here's one here. They just haven't they just haven't installed it yet
Have they and in that something? This is just a threaded coupling
Because this rod only went up to there so they did that
so this rod is from here to there I can tell they they've cut that and
They installed it down in there now see see this one here they haven't put a bolt on
They haven't put a nut on there yet have they
Let's look at these over here and see if they put that nut on there yet. I don't think they have
Yeah, see see they still have to put a washer and a nut on there
to tighten that down and
Yeah, there's nothing
There's nothing on this one either
You see there
They actually had to take this 2x6 here and move it so that they could put that in there
See see where this one was right there the one very much room in there
Was there once they get all that done and get the bolt on there and and and all that kind of stuff
Then they'll go ahead and put this 2x6 this double 2x6 in there why on earth to have a double 2x6 right there
I'm not quite sure why they
Why they did that?
They could have got by with one here, here's an actual bolt an interior wall
See there's one there. So so it is there a rhyme and reason for exactly where they go. Well again
You have to read the plans the plans are
They tell you the story
Okay, let's let's take a look. I was over there before. Let's take a look here. Here's another one here and
Is this gonna be as strong as if as if that was all the way down on the ground
I guess so because like I said, that's the way that's the way the guys showed it
See see how high this one is. Now. Look at this one so much taller. That is let's see the big bolt there
That's big bigger threads to see there. Let's see how they got the nut on there and
They tighten it up. Look at all those screws in there. Boom. Boom. Boom. Boom
And
So much bigger that one is than these smaller ones
Let's see
they still have to put the nut on that they still have to put the nut on that and and it's all it all is on
however, however the engineer the structural engineer designed everything the guy who drew the plans might not be the guy who
Calls out the structural engineering
Structural engineer may look at the plans and then he may decide
What the code is what he has to do to make it to make it pass
Code you submit the plans and if the structural inspector who's doing a plan check doesn't like it
He'll say oh, nope. Nope. Nope. That's the wrong size
He has to be the next size up or is it the bolt size is too small
You don't have enough shown and so they both go hand in hand. I'll see there's more. Here's one there
That's got to go. There's another one. There's another one
Okay, and so that it's it's a work in progress, isn't it see this one over here look at this
Look at that one there. Are they gonna do that? Well, then let's take this two by six out of here, right?
They're gonna take that two by six out so they can get that one there
And then if this doesn't fit exactly there once they put it up there
They'll put this as close as they can there and it's not gonna be on 16-inch
Layout is it it's gonna be slightly off, but that's okay. Look at this. They've got a double
Two by six here. This is the King stud
Tremor is this one and as it goes down look where that bolt is
Look what they had to do to that King stud. They had to
To do it all out so that they can get get their bracket in there
Once they put the bracket in there screw it in there, I guess it's gonna be strong enough, but too bad
This wasn't right there, right?
that's
Whoever laid that one out. They kind of did a boo-boo on that one didn't they?
See there. There's another one over there. Look at this one here
Luckily, they it was sticking up far enough so that they could get this
This coupling on there so they can put the next three
Okay, that's that's how that's how they're tying the floor down here's a couple more here's some more
over in here and
I
Guess this is all what this video is about. See how big these these through
Bolts are as opposed to this size here. See there you can tell this one's smaller than these two, right?
And there's another one it's like good thing they didn't forget that one, right
They could have covered it up if they if they covered anything up said nobody's ever gonna see that
We'll just cover that up the inspector would probably catch him because the inspector he'll take he'll take the approved set of plans when he's
Out here and he'll start looking because if because the inspector who comes out here is not the person who plan checked all of this stuff
That's a different guy who's in there
And so the guy the field inspector he may not even know where all these are
He's gonna look on the plans and then he'll he'll kind of he'll kind of check things out when he does his framing inspection
He's not they're not ready for a framing inspection yet. Are they?
We know that we know they're not ready for framing inspection
Okay, they're still it's still a work in progress
You see there that one that one that one's done really good, right?
That one's done good
Look at that one
It's like they're gonna have to move something over just a little bit
And they've got some on the interior walls the perimeter exterior walls. There's a couple over there. That's gonna hold everything down
It's gonna hold this floor on down and as you bolt it down to here
That's gonna hold this whole wall section this whole wall section that whole wall section on down
To the subfloor because if in high winds if if you didn't have anything like that
could you see how possibly a portion of this house could lift up off of this off of the walls off of the
Foundation or something if it's not tied down and that's how that's how you tie things down
That's why they've got some on the interior walls do all are all houses built this way. No, no, not all houses are built this way
We
years ago when I when I
Was involved building some walls. We never we didn't have any tie-downs like that on interior walls sometimes on exterior walls
Yes, and it just and like I said, it just depends where your house is located
Which County which which city you're in?
Do you have tornadoes? Do you have high winds? Do you have do you have?
You know things like that
Around and your building department will tell you
What you've got to do what you don't have to do or whoever's drawing your plans, you know
He's supposed to know what the codes are. Okay, so so there you go
Here's another one here. So, you know, look at look at this one right out here. No man's land
That's that's because that's right where a wall is
You can see where the wall is see where they've snapped their lines. It goes all the way through
So see we we know we still have some interior walls to go don't we there's one that goes off that way
Here's another one that goes across this way. Here's another one over here. Here's another one over in here
Here's one that goes there
They still they still got a ways to go
I was kind of I was kind of hoping they were gonna be further
But I'm actually kind of glad that they're not because now we can we can see the ongoing progress
Can't we because once once they do more I'll show you I'll show you more. We'll talk about more next time
okay, we'll talk about we'll talk about spans of beams and and the and the
Trimmers King studs here here. There's the bottom plate to this window system has two two by sixes
Those have two two bases. Look at all these the windows all of them have two two by sixes there
We used to we should always do the windows with just one
Two by six is that a requirement nowadays or are they just doing that to make that little section more strong more sturdy?
I don't know. Okay, but that's that that's kind of tricky how they built that that wall
How did they know what angle to make that wall?
On up and down and and where it's tying in
How did how did they know it was gonna be like a four and twelve or five and twelve or six and twelve pitch or
Eight and twelve. How do you know any of any of this stuff? Well, it's all it's all gonna be on the plans
We could see they've got boom. Boom. Boom three windows here. Here's a small window up there. Here's a bigger window here
Here's a small type window right there. Look at this over here. Here's three windows kaboom kaboom kaboom
Why did he make them so small? Why are they up so much higher than these?
How come these windows didn't come down any lower?
You know, there's there's there's always a reason see see this room over here
Look at this. Look at this the windows down low in it
How come those is it okay to have the windows up high as opposed to down low? Well, I
guess I guess the answer is yes, there is a reason and
So anyways, well, I'll
I'll walk around a little bit more next time
I'm gonna be in town for the rest of the week. And so we'll we'll continue to see the progress
Out here. That's all I got for this time, but I'll be back with more
videos
Looking good
