HE LOST A 2K BET! MAJOR TRANSFORMATION: Barber Tutorial

jjaybeardedbarber
57 followers
34 Video Views·Aug 20, 2026
Follow my brand:
www.josephsignatureline.com
IG: @josephsignatureline - https://www.instagram.com/josephsignatureline/
Thank you everyone for Watching! I hope you guys enjoy the tutorial and learned something new! Make sure to smash the like button, share the video, subscribe to the channel, and comment down below!
Links for Everything will be down below!
Follow me on Instagram @jjay_beardedbarber
Beat by IG: @restlessmindbeats
Turkish Straight Razor can be purchased at www.josephsignatureline.com use "joseph10" to get 10% off your order!
Gamma and Style craft Clippers and Trimmers can be purchased at www.gammaplusna.com use "jjay10' to get 10% off your entire order!
Hey, what's up YouTube fam?
Today, we have another tutorial.
This one is a transformation.
But before we get into the whole video,
I am here at the post office dropping off some packages.
I just wanna say thank you, thank you so much
for everybody that supports my brand.
If you haven't seen my brand yet, I'll have it down below.
It is the Joseph Signature line.
I did drop it about a month ago, we started it.
And we know we're off to a good start, I can't complain.
I'm super blessed and thankful for where we're at.
So if you guys do wanna support or check it out,
make sure to check out the description down below.
Moving on to the tutorial.
Today, this is a transformational video, okay?
So the priest at my church, Father Peter,
shout out Father Peter, his nephew came down from San Diego.
He's originally from San Diego.
He came down here to visit him.
They had a 2K tournament, had a bet.
And if he lost the bet, he had to chop his hair off.
So he had nice, long hair.
Originally, when he first came in,
we were just gonna give him a mid-fade,
trim a little bit off the top.
But throughout the haircut, he was talking about
he liked how my crop haircut was,
and he was like, oh, I would've liked to do it,
but he was too scared.
So we're cutting it, and you'll see in the video,
like we started normal to cut it,
how we were just gonna give it a nice trim and all that.
But then he's like, you know what, just screw it,
cut it off.
So we're like, oh, are you sure?
He's like, yeah, just cut it off.
So that's why you kinda see me go from
giving it a normal trim to cutting it all off.
So it was a major transformation.
I got super roasted for it on Instagram,
but this is why I like the YouTube part,
so I can kinda give you guys an explanation
on what happened and the whole walkthrough,
you know, how the hair coming down.
But super dope tutorial.
Make sure to stick around throughout the whole video.
But you guys are gonna enjoy it,
but I'm talking too much,
so let's get on to the YouTube video.
All right, I hope you guys liked that intro.
That is the new intro to my Joseph Signature Line brand.
So make sure to go and follow it and stay tuned for you,
so you can stay up to date with everything.
But this is my boy Randy right here.
As you guys can see, he's got nice flowy hair.
I was recording this for Instagram,
so that's why I pulled out my phone throughout the video
so you guys can see it.
Just get a little sneak peek
of how I record my Instagram videos and all that.
If you want me to go more in depth
in like how I make my Instagram videos and stuff like that,
go ahead and comment down below.
I'll do a separate video for that.
Right here, so like I said,
originally we were doing, you know,
leaving the top long and disconnecting it from the side,
giving them a mid-fade.
So right here I was just sectioning
the long hair from the sides.
This part's super important
because you wanna make sure it's clean.
You wanna make sure the line's straight.
You don't want it like that, jaggedy.
So if you have to, spray some water in there,
just slightly, just so you can make a straight line in there
and get into the cut.
After we have the top section from the bottom,
we went and threw our number three guard on,
and I'm just removing bulk right here.
Since his hair's really long,
it's been a few months since he's got a haircut,
I'm using it with the lever completely closed.
These are my Gamma Ergo Clippers.
They shred through bulk like nothing,
and I'm just following it all the way across the head
with the three guard completely closed,
and we're just removing bulk right here.
So since we debulked the sides now,
I just want to go throw a little bit of water in there
and make sure those lines are really straight
and everything's sectioned perfectly
because originally I was doing an undercut,
so I wanna make sure everything's perfect
so he doesn't have any jaggedy lines.
If you guys wanna see a video of how I section,
go and comment down below,
but just make sure you use those first few teeth
of the comb and just follow along like a straight line,
and then whatever you do with that comb,
that's what the line will show up.
So if you make a straight line, it's gonna be straight.
If you kind of make it diagonal,
the line's gonna come more diagonal.
So just be very diligent
and make that line as straight as possible.
It's really important to make sure
those lines are nice and perfect,
but this is a little trick.
Go and just twist the hair nice and tight,
and then pin it with one of your clips.
Now we're just going back over with that three guard again
and just clean off those extra hairs that we pulled down.
Now we have our one and a half guard completely closed,
and we're falling right under
that three guard that we just did.
This is the wall system,
so this is the one and a half guard completely closed.
Next, we're gonna create our shape, that nice square shape,
and we're using our clip-over comb
to blend that one and a half guard into the three guard
and into the very long hair that we had on the very top.
Next, we're gonna go ahead and put our bald guy line in.
So now we're gonna have our bald guy line,
and then we're gonna blend from that
all the way to that one and a half guard closed.
So then after that, we're only gonna use
the clipper with no guard,
clipper with the half guard,
and clipper with the one guard.
And as you guys can see,
I usually just hold my phone in front of me.
I'm gonna give you guys a little free tips,
but just hold the phone in front of me,
make where I'm gonna record what I'm gonna record,
and then put it down and then proceed with the haircut.
So right here, I wanna set the foundation
of the whole haircut.
So I'm pushing his baby hairs down,
and we're gonna go and line up that front edge
and then line up his vertical bars,
just so I can see what I'm really fading into.
Now we have our half guard,
and we have it completely closed,
and we're gonna follow that throughout the whole head.
Next, we have our one guard completely closed.
This is a little bit different fade technique
than we usually do,
but this is the one guard completely closed.
So now you have the half guard completely closed line,
and then you have the one guard open,
I'm sorry, complete closed line.
So now you have two lines.
And then after that,
what you're gonna really need to do is open up the blade,
and that's gonna fade into the one and a half guard
completely closed from earlier.
So right here, we have the guard open,
or no, we still have it closed.
We're slowly opening it and moving up into,
right now we have a halfway open,
and we're moving it into that long hair.
Now as you guys can tell, I'm not digging in,
I'm going off of his head with that one guard,
keeping it super consistent and not digging in.
All right, you just wanna continuously do that
until it slowly starts to fade out.
If it's not fading, go and close it down the lever,
and then proceed.
Just keep as consistent as possible,
use corners when you're fading,
and just work on it step by step.
If it's not doing anything,
either move from that area or change guards
or move with the lever.
Lever play is very important
if you wanna pick up your fade.
Speed, and if you wanna get really good with detail,
and you have to be able to open and close the lever
pretty quick.
You don't have to move it quick to be successful
and get a super blurry fade,
but lever play is super important,
and it does help with speeding up your fades
and getting out lines a lot faster.
Now I just went to my two guard,
and what this is gonna blend out
is that dark area from the three guard
and the one and a half guard that we did earlier,
and after the clipper of a comb.
This is just detailing it, getting it more flawless.
Some people could just leave it like that,
and some people might think it's a good fade,
but if you really wanna get that flawless and blurry fade,
you have to go over your steps continuously
in order to really get that nice blend,
but keeping it dark on top by having a nice transition.
Back with that one and a half guard,
open to close, just detailing.
All right, now we're back to that half guard
with it completely open,
and this is what's gonna bring everything together.
As you guys can see,
it looks like I'm fading in where I was with the one guard
or where I was with the two guard
because when it comes to fading,
you have to move up and you have to stay consistent.
You can't stay low and expect a fade to happen,
so you've gotta be in the same area.
Everything is in millimeters, so it's pretty precise.
So as long as you're keeping it flush to the head,
using corners and not moving any higher,
moving higher slowly.
You don't wanna push up the fade,
but you wanna keep it in that same consistent area
and using the corners, taking out dark spots,
taking out light spots.
As you guys can see,
I'm poking with the right corner of the blade,
and as you can see, the fade is starting to come together.
Now we have no guard, lever completely closed.
You can barely see that bald guy line,
but it's still there.
Closer to his vertical bar is a lot lighter,
but as you go to the back where it's more dense,
it's gonna be darker.
But now we're just gonna go from blade closed,
halfway, all the way open, following those same steps,
using corner as we get higher into the next guard.
So as we get higher into that area
where we had the half guard
and we have the blade completely open,
we're gonna use the corner
just so we don't create a new line
and we have a nice transition.
Now just to add that extra transition,
we're gonna go with our gamma shavers
and bold him out right below that line.
If we do create a line or see any dark spots,
we'll go follow up our trimmer
and then our clipper with no guard.
This is where those little extra details go in.
I'm just combing his hair forward.
I'm using my scissors to get any excess hairs
that hang over the line that I did create.
All right, here's where we take the haircut
to the next level.
This is what separates your haircuts
from everybody else.
As you can see, the lineup was sharp before,
but we're just gonna add a little bit of enhancement
in there and boom, look at that.
That vertical part is popping a lot more.
His lineup's gonna look super crispy, dark,
but not too dark where it looks super unnatural.
It still looks pretty natural.
It just fills in those lighter spots
that you can see in the middle of his forehead.
What I love so much about cutting hair
is you're the artist.
Everything's up to you.
If you wanna do a haircut a certain way,
if you wanna fade a certain way, you can.
It's all completely up to you.
There's so many different techniques out here
just for you to kinda see
and then throw it into your arsenal
so you can do it the way you wanna do.
I'm not out here trying to tell you guys
this is the best way to fade.
I'm just out here trying to show you guys what I do
and hopefully you can learn something from me
and add it to your arsenal that will make sense
whenever it comes to you cutting
or if you're a new barber
and you're just looking for some clarifications,
hopefully I can do that for you.
Now look at that.
Tell me that doesn't look super natural,
but crispy as well.
So now we're moving on to the top of his hair.
As you guys can tell, he's got really nice hair.
We could've done a nice style with it.
But right here, we're just talking about it.
He's kinda telling me, do whatever you wanna do.
So we're just going back and forth
because I don't wanna chop off his hair
because it was so long.
I grew attached to my hair when I grew it long,
so I was like, I don't know.
So we're talking about it a little bit
and then you'll see what happens.
So we're saturating the hair right now,
getting it all nice and wet,
getting it ready to get cut.
And then he tells me, let's just chop it off.
Look right here, I'm just sectioning off the back,
giving it a nice trim.
And we're talking, he's like, just cut it off.
Just do it.
So I'm like, all right, bet.
I push all his hair forward.
Now we're changing it from a long push back
to a crop top, so we comb it back.
Combed all his hair forward.
I was like, I gotta record this for the gram.
This is gonna be a good transformational video.
But we had the whole haircut set up perfectly
for a slick back and we just changed it all up at the end.
But when you cut the sides and leave enough length
on the side, how we did with the three guard
and the clip over comb, it allowed us
to still cut the hair pretty short
and blend it into the sides
without having the sides too short.
Right here, sorry I didn't have the clear shot,
but you can see through the phone,
we just chopped off all his hair.
Look at that, gone.
That's probably over a year's worth of growth
or I don't know, eight months, he's younger.
So his hair probably grows pretty quick,
but now it's time to change it to a crop top.
So what I'm doing here is I sectioned the fringe
from the very front as you saw earlier.
Made that first initial guideline
and then now I'm taking another section.
Gonna make another guideline.
I'm gonna continue to do that until I get to the back
to where all the hair is the same length
or meeting all the way in that front fringe.
So now we rested the comb on his head.
Saw where his head bent
and we're taking that section
and then we're gonna connect that,
all those hairs into that three guard
and clip over comb we did on the side.
Same thing on the other side,
see where the head bends, section that off
and then scissor over comb
or scissor over finger that into the long hair.
Now we're taking a middle section,
some vertical sections from the short hair
that we cut from earlier
and just pulling that all the way back.
And then we're gonna do the same thing,
push all over to one side
and connect it into that guideline.
Now we're just cross checking our work,
make sure everything's nice and even.
So right here I noticed,
I combed everything forward
and I noticed it was still a little bit bulkier
on the line up area.
So I went ahead and cut even shorter
just so it's not too bulky.
I'm just scissor over combing the fringe,
just make sure it's laying down nice and even.
After that, after the hair is nice and completely dry,
we're gonna throw in some of my volume powder
that I'm gonna be dropping soon.
So make sure to be on the lookout for that.
Just adds texture and volume to the hair,
makes it, gives it that nice croppy texture look
with a matte finish, but you know, pretty strong hold.
Now to lock it in, we're gonna use my clay as well.
This product, I'm super excited for you guys to try out.
This clay is probably the best clay you guys will ever use.
It has such a good hold, very low shine,
like a one star shine, but a very hold, high hold.
So I'm excited for you guys to try that out.
This is just gonna lock everything in,
hold that texture powder in there.
It's got a nice scent, as you can see, I smell it in my hand.
Yeah, stay tuned, make sure to follow the Instagram page
so you guys stay up to date.
So this is how my guy came in before, long hair.
It's been a few months since he got a haircut.
You can tell he has that flow.
And then this is how he left the chair.
Boom, total transformation.
Went from long hair to short hair with a mid-drop fade.
I think it looks dope.
Wouldn't it be something I would have done with his hair,
I probably would have left the long hair.
But when you lose a bet, you lose a bet,
and you gotta deal with the consequences.
Hope you guys learned something new.
I'll catch you guys on the next one, I'm out.
