One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games
back with another cool arcade game repair video for you this evening.
Well, today we have a Vectrex system.
You may be thinking, well, that's not an arcade game, Joe.
What's going on here?
Well, technically, Vectrex arcade system.
It is an arcade game.
And you're never going to believe what's wrong with this thing.
I, you know, we may mostly work on arcade games and pinball machines.
I've never really worked on a Vectrex before,
but I actually know what's wrong with it,
even though I've never worked on one before.
It's broke. That's right.
It's supposed to have a volume control here.
When you turn it to the right, it's supposed to turn the whole thing on.
It's not doing nothing.
You don't know about this.
This is actually a
it's like a little mini arcade from back in the day, Vectrex.
And it takes these little cartridges.
This is a Star Trek motion picture.
So I bought this a long time ago from somebody
and it's been sitting in the back room for a long time,
at least five years, maybe longer.
I guess I knew it was broke back then and put it on the shelf
and I never messed with it.
So I actually ended up getting
another Vectrex a couple of months back and it worked fine.
So I ended up selling it.
So now I'm going to try to fix this one because people want them.
And, you know, I want to make that money.
I need to try to fix this thing.
So first thing we're going to do is we're going to take off the back.
This one's got some damage.
It looks like somebody's duct taped it.
I don't remember where I got this thing.
It's been so long, but I must have got a pretty good deal on it.
This actually folds up in there.
It looks pretty cool once it's all together.
Let's see.
I'm hoping there's just a fuse blown or something since it's not doing anything.
I've heard these have issues with caps.
Is there tape on this side?
I'm going to unplug this.
Yeah, I'm going to unplug this, keep it out of the way.
See, I've seen those two screws going in there.
There's another screw in there.
All right. So let me get a screwdriver.
We'll get the back off this thing and then we'll look at it some more.
All right. I got the back off.
Here's what it looks like inside in case anybody was wondering.
And, you know, it's supposed to be like a vector arcade monitor.
That's where they get the Vectrex name from.
You know, asteroids, monitors and stuff like that are vectors.
Anyway, here's what it looks like inside.
Just a little monitor.
I kind of thought somebody had changed these caps,
but looking at the back, it doesn't really look like it.
So maybe those are factory.
And I guess this is the main board that runs the
console side.
And that's the monitor board.
And the power comes in
and goes through this transformer.
And it looks like it goes through a fuse in here.
So I want to take this off to see if the fuse is blown.
See what I did.
A loctite or something on it.
Nobody's ever been in here.
It doesn't look like on this part anyway.
Let's see.
I don't know if you'll ever see that, but there's like a red
loctite looking stuff on there.
It looks good.
Let's see if it is good.
Yeah, fuse is good.
It's a little higher than normal.
They're usually like 0.2.
It's got some resistance in there, but it's probably still five connected.
All right.
So that don't really help us, none.
I guess I could plug it in to make sure it's getting 110 over here.
I'm going to have to electrocute myself.
I don't know if you saw that, but it's getting power.
OK, it's getting power in.
The fuse is good.
So the only thing I know to do is to start changing the caps.
This board here doesn't look all that great.
Almost looks like dog pee.
Yeah, that's right. I said it.
I went ahead and said it.
This thing's got dog piss on it is what it's got on it.
I've seen that before.
Don't you think so?
I think I'm gonna take that board out, change all the caps and try it again.
I think that's the best plan of action.
We're getting power over there to it.
I don't know.
I don't even know what none of those chips are, but I'm sure I've got all those caps.
They're probably all just standard arcade caps.
So I'm going to start changing them babies and see how it goes.
Well, I changed a few of the caps.
I changed this one, that one, this one,
that one and that one.
And then I got impatient.
I wanted to try to see if it was working yet. OK.
But then it still was dead.
And I decided to Google it.
And apparently these Vectrex are known for having bad
on off switches because they've got the volume goes through it.
So you turn it to the right to turn it on, you know, and it's the volume control.
And I guess they've been sitting a long time.
It's kind of like the old TVs.
Remember the old TVs that you turned to turn the TV on?
This has the same thing.
And I decided, well, dang, I probably ought to.
I should have tried that first.
And that's the back side of it there.
So what I did was I took some of this contact cleaner
and I sprayed the heck out of it.
I mean, I this way, that way from the back.
Try to get it in over here.
And I turned the knob back and forth, back and forth, back and forth,
back and forth, back and forth, back and forth, back and forth.
And you ready, Captain?
This is the game I had for it.
I had a Star Trek game.
But as you can see, the picture is still not quite right.
It's still it's kind of down and to the left.
And I don't know.
It's just not I don't think it's quite right.
I may be able to adjust it, you know, with some adjustments on the back.
But the whole thing is, I haven't finished capping it yet.
So I'm not going to do anything like that until I finish changing all the caps.
They're kind of hard to get to.
I may end up just taking it out like I'm supposed to,
but I was trying to do it,
you know, without removing the board.
I've just been on soldering it and you can get to the back of it pretty easy.
And I've been putting another one in there and soldering it in.
But these ones back here are going to be tough to change.
So I'm probably going to take the whole board out.
But we'll see.
But that's a little update.
I'll be back with you whenever I get it all capped.
And hopefully it fixes the picture size.
All right. So I changed all the caps.
And this is supposed to be like that.
See how it's kind of stretched out a little bit.
All of them do that.
But I'm still too far to the left.
And I think I'm too far down on the screen.
I'm just slightly off centered and I'm too low.
See? And for what I've read online,
you have to adjust basically the convergence rings,
these little rings here,
that one and that one.
One of them is supposed to move it up and down,
and the other one is supposed to move it side to side.
Let's see if we can carefully do this, I guess.
What's this one do?
That one's moving it up.
I wish I could get it to stay on one screen.
Apparently, you're supposed to have a test cartridge,
but I just keep turning it off and back on
to see where that Vectrex part is.
Can't tell if we moved it up any or not.
All right, let's see what else we can do.
What'd that do?
OK, we're definitely moving it up now.
But are we any closer to center?
I think we're a lot better than we were.
I think I might go a little bit more.
All right, I think I'm going to leave good enough alone at that.
I think that looks pretty good.
So I'm going to try to clean this up.
And I want to try to fix this
back case so I can screw it all back together.
I'll be back with you when I figure something out about that.
Well, I figured before I put it all back together,
I better show you some more of the inside of it.
Basically, we had two problems.
We had the main problem was the on off switch.
It got corroded.
And we basically just sprayed a crap load of this on there
and worked it back and forth a bunch.
This is good stuff.
I've used this on a lot of arcade game stuff.
But anyway, that fixed that problem.
But then the picture was too dim.
And basically these caps in this section
fix that problem.
And this is the brightness spot.
And all those big caps around it seem to do the brightness.
I changed all these other caps,
and there's a bunch more on that backside that were hard to get to,
but they didn't really seem to affect anything.
So I guess the original ones were still fine.
But these over here were definitely bad
because I was I was changing a few and checking it,
changing a few and checking it.
And these two caps here brought my brightness back.
If anybody's got one.
Apparently, that's a problem with the brightness on these.
And these little tabs
adjust the centering.
This one does the left or right.
And this one on the bottom.
Where did it go?
That one does the up and down.
So I moved that one a ton.
That one was actually way over here when I started.
And I moved this one a little bit.
This one was kind of over here,
but the bottom one was there.
So I moved that bottom one like a half a turn.
But anyway, I've got it pretty centered.
I don't want to go too crazy with it because I don't know exactly what I'm doing.
And I would mention that these are basically convergent rings.
But if you've got a color monitor,
Vectrex are all black and white.
But if you're messing with an arcade monitor, that's a color monitor.
I would recommend never touching the convergence rings, OK?
You can do it on a black and white monitor because nothing has to line up.
There's only one color.
But on a color monitor,
it converges the red, the green and the blue.
And if they're not all perfectly converged, you'll have little lines showing.
It won't be lined up.
So you won't have white.
You'll have just
you'll have you may have if you got it way far off,
you're going to have three different lines.
You'll have a red line, a green line and a blue line.
I've learned that the hard way.
Sometimes you'll get a little corner that won't quite be lined up.
The blue will be off and you'll try to mess with it with convergence rings.
And you'll never get it back the way it should be.
And it would be a lot worse than what it was originally.
So most of the time, just leave the convergence rings alone.
Unless it's a black and white, you can get away with it.
Like on a Vectrex like this.
But I'm going to try to clean up this dog pee or whatever the heck it is.
And glue that back little piece back on.
And I'm hoping I can get it to bolt back in just a bolt in there
and there and a couple more spots down at the bottom.
And I wanted to get it all back out supposed to be.
They had that black duct tape on it before.
I don't want that.
So I'm going to work on this a little bit longer.
And hopefully I'll be back with you.
We'll play a game and should be good to go.
All right, folks.
It's viewer mail time.
We have gotten in this super heavy box.
There's going to be something super cool in it.
This is our address.
If you want to send us mail.
Now, we are not soliciting gifts from people, but, you know,
sometimes people like to send you mail or things like will be
contained in this box.
So, you know, part of being generous is
accepting presents, too, right?
OK, so this comes from Greg,
and I did open it because I was I didn't know if it was what it was.
Right. So I opened it and saw a little bit of what's in there.
And it looks like there's a note.
So we're going to go through it if I can figure out how to open it again.
All right. Are you ready for this?
Yeah, baby.
It's some kind of electronic surplus.
This is my favorite thing to get
because I know this type of stuff is useless to a lot of people,
but it's very useful to me.
So I would hate to think that any of this stuff gets thrown away
because, you know, I work on we work on the arcade games and stuff.
But I also on the amateur repair time channel, I work on old radios,
even old TVs, old record players.
So this kind of stuff really is useful to me.
So these are ceramic disc capacitors.
Let's see what the value is to 22.
So that would be 22.
So it'd be point zero zero two two point zero zero two two, I believe.
All right. Now let me look at another one.
Just make sure they're all the same.
OK, cool. Well, that's pretty sweet.
Now, what are these bad boys?
Resistors or capacitors?
That would be a resistor.
60 meg. Wow.
Really? I'll have to check that to see.
I'll get a multimeter and check that.
60 mega ohm, 6000 volt special.
That's a hell of a resistor.
I mean, and there's a bunch of them.
I don't know that I need anything with 60 megs, but maybe, you know,
like that's some that's a serious part right there.
That was probably pretty expensive back in the day.
I'll see what we have here.
Maybe point one with the light on it.
There can't tell what that means at all.
Point one 400 volt.
Or is it one 400 volt?
I think that's a that's drawn on there to point one. OK.
That's pretty cool.
There's all kinds of stuff in here.
What in the world?
Wow. Momentary push buttons.
This is actually this could work on arcade games, actually.
Well, if that's what that is.
Something. These may all be different.
I thought, let me read them through the bag.
Point one 400 volt.
Suspiciously, what that one says.
I am suspicious.
These are the same. OK, so that whole bag is the same.
The point one are very useful.
I mean, you use them a lot on arcade game monitors, mainly,
and also on tube radios all over the place.
What is this?
I have no clue.
Lots of goodies, Greg.
Use something, something, something.
The point ones again. OK.
These are the same. OK.
In radios, I mean, you use a ton of these, a ton.
These are mylar, though, and the ones in the radios are usually
old school wax paper caps that go bad.
All right. Now here we have little
leads, I guess.
Looks like they're rivets.
You rivet it to a piece of metal for this chain.
Maybe, did I say a chain?
And then these, sometimes it's a little tab that attaches to like a screw,
like a grounding screw.
Yeah, a bunch of that type of stuff.
And this is a grounding clip where it like clips over the edge
of a piece of metal, maybe.
I don't really know what these are.
These, I guess, are just like
sometimes you'll see stuff like this where a wire attaches or something, I guess.
All right. It's a bunch of cool stuff.
Thank you, Greg. Awesome.
Now, I think he sent us a note.
We're going to read the note.
This is like right up my alley.
I love this type of stuff.
So I'm glad I'm glad to see people get that stuff.
You know, I don't know that I'll use all of it, but I respect it.
So I won't throw it away.
You know what I mean?
So I'm glad to get it to somebody who appreciates it instead of trashing it.
All right. Here we go.
We're going to read it raw.
We'll do it live.
Hi, Ronnie.
I watch all the channels and enjoy them each for their own unique reasons.
Why, thank you.
I have the same hobbies as you and also enjoy a good estate auction.
Ain't that the truth?
I went to the flea market yesterday, Greg.
Guy had a RCA 1950 RCA tube radio.
Looks like somebody had fixed it up back in maybe the 60s.
Real clean looking.
The real weird one has a big round kind of speaker grill in the middle.
It's square.
Has a big round speaker grill in the middle.
It's an RCA.
It has a tuning knob on the left and a volume knob on the right or vice versa.
And then down at the bottom, there's a little lens about this big
all the way across that's like rolled with the needle in it.
And it's just a beautiful radio.
So I walked up and the guy was like,
I was like, Hey, how much on your old radio?
And he had a whole bunch of antiques and stuff.
And he's like, Well, unfortunately, the cord got old and brittle
and someone has cut the cord off on the back.
The cord was cut off, which, as you know, who cares?
You're going to do that anyway.
And he's like, So I don't know if it works.
I was asking 15, I'll take 10.
Well, I can do that.
So I got a nice tube radio yesterday.
I seem to have an addiction to parts organizer drawer bins.
I picked up a bunch of capacitors and resistors in a lot and have too many.
So I figured I would send you some crap to spread it around.
Why? Thank you, Greg. I appreciate it.
I tried to pull out some of the parts radio related.
So hopefully they may be of some use.
I'm sure you'll never use all of them.
Probably not.
But I can use a bunch of them.
Thanks for all the entertainment.
Greg, also known as Galaxian, a fine game.
If there ever was one.
All right, Greg. Well, I appreciate it.
They made it here safely.
I will put them with my stash.
I have stashes here and there and everywhere.
And I will use them from time to time.
And I appreciate you spreading the love.
So we'll see.
We'll see you on a future video where I'm sure I'll use some of them.
But back to the video.
All right, I got it all cleaned up.
All that residue came off from the duct tape.
I use this stuff.
Goo gone.
I've been using this for years.
It works really good.
They make some other stuff called goof off.
Don't get that.
You have to get the goo gone, OK?
This time, if you use that goof off stuff, it'll melt the plastic.
I found that out the hard way.
It's not the same stuff.
Goo gone is what you need.
But anyway, let's see if everything seems to be working.
I've already tested it, so I know everything's working.
I know you guys want to see.
It's still slightly off center, but I'm going to leave good enough alone.
You got to know when to hold them, know when to fold them, OK?
It's all a trick.
All right, player one.
I've never played this game before.
I have no idea what I'm doing.
I guess you can select the types of game.
It's got different modes, I guess.
I'm ready, Captain.
I guess I'm just shooting everything.
I can't turn that fast.
They're coming right for me.
I guess they shot me.
I'm dead.
I can't go down fast enough.
I wonder if one of these other buttons makes me.
I wonder what that does.
I don't think that really helped me much.
Any key for replay?
Bam.
Obviously, I'm not any good.
I actually don't play games very often.
All I need to know, though, is that everything works.
All the buttons work and the joystick works.
The volume works.
Well, that's pretty cool.
I like it.
I'll show you how the controller goes back in there.
Turn it off.
The volume.
And this is kind of
sits in there and then it folds up.
If you get to get the cord out of the way, it does.
Obviously, I don't know what I'm doing.
There we go.
Bam. Just like that.
Pretty neat.
And I make a bunch of different games for this.
And each game, you're supposed to have a little
overlay that goes over the monitor.
You can see where it sits,
but I don't have any of the overlays.
And this is the only game that I've got.
Star Trek.
I never watched Star Trek.
That was a little bit before my time.
I know there's a lot of Star Trek is out there.
I watch some of this.
Well, I think I've watched all of the Star Wars.
Can you like both?
Can you like Star Trek and Star Wars,
or do you have to like Star Wars or Star Trek?
I don't know.
But they make a multi cart for this, which is pretty cool.
It's got like I saw it on eBay.
Look like something pretty new.
Somebody is making and it's got like 30 games on one cartridge.
So if you had one of these, that would be the thing to do.
It seems like and you can play two player apparently with that.
But you got to have another one of these
controllers plugs in right there, player two.
But anyway, I just thought I'd film this.
That's kind of how it turned out.
The last one, the last one I sold for $450.
So they're pretty collectible.
So I'm hoping this one will sell pretty quick, too.
I'm selling it all together with the cartridge.
It's already been capped, ready to go.
But anyway, thanks, everybody, for watching.
We appreciate it.
And we'll see you on the next one.