I 3D-Printed An Rc Car And Powered It With A Real V8 Engine! Part 2

Tech Care
3 followers
Jul 27, 2026
AI Generated·May contain errors
So the wheelbase will be 47 centimeters and I'm thinking if I design a body we're gonna remove
the hood so that engine will be sticking out. Hello it's Ali, welcome back to the channel.
So I've been working on the eight scale chassis since the last video I uploaded. I was waiting
for the driveshaft and also for the links so now we have the driveshaft and we're gonna put it on
and I had a small problem with the rear axle. I made the links previously. If you haven't seen
the part one of this video I will make sure to put it in the video description box below.
So with the 3d printed links we don't have any problem, only the ball joint is a bit loose and
I can see it's a bit wobbly. So I found these links and this was pretty cheap and it's solid
steel and the ball joint are pretty tight. So we're gonna put them on. This is 140 millimeter
and this one is 120 millimeter. So we're gonna need two of each and yeah we're gonna put them on
and hopefully we're not gonna have that wobbling at the rear axle. So that's for the back. For the
front we already finished everything. We only have the driveshafts. We're gonna put them on
and here are the driveshafts. With this kind of driveshaft it needs two types of bearing. There's
a big one and here's a small one. I also made a rotor which it has this cut so the pin will be
inside it and not gonna rotate. So yeah that's what we have for the front and yeah. Few things I did
for the engine and also for the electrical version. Now we have the engine here so if we want to make
it with an engine I already have the gearbox here. We will need a short driveshaft from here to here
and it will all be connected and if you don't have the engine we will put a brushed or brushless
motor on it and the weight will be distributed and you can use it as a crawler and some people
also recommended me to make it like a car maybe a muscle car body. We can do this and I already
been working on the body so with the body I will show you what I was doing. It will be about 600
millimeter long maybe 640. Everything will be 3d printed so you don't have to buy anything for the
body. Also you can use Lexan body for this chassis. So with the rear axle we have 210 millimeter and
I wanted to increase it by 7 millimeter from each side and we're gonna remove these spacers. I already
made my spacer which it has a rotor and we're gonna put it on and also give us a 7 millimeter
difference with that axle. With the gearbox area I did a small modification with the chassis.
So with the mid section it was one part with that bracket that holds the gearbox and I separated
them just in case if we replace the gearbox so we don't have to print all this part. So now it's
and also it will be way stronger if you print it like this and not vertical. All right so we're
gonna start with putting the driveshaft in the front and then we're gonna go to the rear and
then install the links and hopefully we don't have that wobbling with the axle and after that we will
install the electronics and see how everything works because with the electrical version we
will make sure that everything works and then for the engine type it will be way easier. We're just
gonna connect the engine with the gearbox. So now we are focusing on the electrical version so we can
see everything works and then after this it's way easier to put the engine on. The only thing we have
to think about it after putting the engine the radiator and also the fuel tank which will be
very easy to figure out. So now let's do it. I'm happy to announce this video is sponsored by
If you are working on custom design, sheet metal fabrication, injection molding or 3d printing
head over to pcbway.com. If you want to get high quality 3d print without heading you just have to
put the file here, choose the material and it will tell you the price and shipping date and now it's
their 12th year of anniversary. Check it out so you can get your coupon. Link in the video description
back to the video
All right we are back. The driving capability is good but not very good. I could hear some
clicking sound with the rear diff so I don't know what is the problem with that so we have to
disassemble it and see what is that problem and the second thing I saw this was a bit of problem
when I was passing by bumps and it was hitting so either I have to remove it and bring it up
or make it like a curve so it doesn't hit things like this but other than that it drives really
nice. The steering angle is very good. I like it. We can do a bit more because it's gonna be a long
vehicle so we can increase the steering angle but for now everything works good. The tire size and
wheelbase works perfectly fine and some of you asked me for the exact measurement for the wheelbase
so if we measure it so the wheelbase will be 47 centimeters and the chassis length will be 60
centimeters and with the body I'm thinking it will be a bit longer so 70 centimeters for the body
and the chassis height 5 centimeters and the engine now sitting at 22 centimeters and I'm
thinking if I design a body we're gonna remove the hood so that engine will be sticking out.
All right I would like to give you some information about the body so this is the body I was working
on it's like Jeep Gladiator but it's not gonna be fully like Jeep Gladiator I would like to
change something so maybe the bed will be shorter for single cabin and the shocks will be shown like
this I would like to make it more like a trophy truck than a normal truck but yeah and also I
made the door like a tube style and we have the footstep. I also have that idea to make that
footstep motorized but that will be for the future but yeah let me know what do you guys think about
it would you like me to release the file like this and you will figure out the body or you would
like to wait till I finish everything with the body and also the chest. A big thank you to my
patreon supporters for supporting me all this time thanks for watching and see you in the next one
bye for now
