Most Powerful Car Engines: Pontiac Builds SOHC and DOHC V8s in the 1960s!

Engine in Focus
4 followers
If you're a fan of Pontiac, then you know that Pontiac produced some great V8 engines
throughout its lifetime. And those Pontiac V8s ranged in size from a paltry 265 cubic inches
in the early 1980s. Let's not discuss that engine too much. All the way up to a 455 cubic incher
that started life in 1970 and then was sunset in 1976. But some of the more famous Pontiac V8s
were produced in the mid-1960s and those had 389 cubic inches as well as 421 cubic inch
displacements. The Pontiac 389 was a mainstay of Pontiacs for many years and was just an excellent
reliable engine that could be outfitted with, well, some hot stuff including in the GTOs where
they were outfitted sometimes with 3.2 barrel carburetors. The 421 was an even hotter mill in
some cases and was introduced in 1961 in some super duty Pontiacs topped by two four barrel
carburetors. The 421 continued life all the way through the 1966 model year and then in 1967
it was sunset in favor of an enlarged 428 cubic inch engine. Now as I mentioned, many Pontiacs
were outfitted with 389 V8s under hood. Here's one in a 1966 Catalina. This is just the rather
tame 389 cubic inch two barrel V8 but it still was a great runner and you had 421s as an example
that came under hood standard in two plus twos like this that had the open breathing air cleaner
that were again great factory engines. Now aside from the somewhat conventional V8s,
Pontiac produced a number of strange engines including in 1961 introducing this so-called
half a V8 into the small Tempest. This literally was half of a 389 cubic inch V8. You can see that
there's only a cylinder bank on the passenger side of this Tempest and so as a result this
was 195 cubic inch engine and it was well interesting and different and it worked. It
was reliable in general. The only thing is with a four-cylinder engine this big with no balance shaft
it did have some well shakes and shivers associated with it some of which were quelled
by the Tempest rope drive shaft. Another interesting and innovative engine that Pontiac came out with
in the 60s was the overhead cam six-cylinder that was produced from 1966 through 1969. Here you see
it's topped by a four barrel carburetor. This was a rather hot variant of that Pontiac overhead cam
six-cylinder and this six-cylinder had some interesting technologies associated with it
including belt drive for the overhead cams. You can see the cover there on the front end of the
engine. I also like the valve cover the stylized valve cover that says overhead cam and PMD on it.
So Pontiac just wasn't your average run-of-the-mill division when it came to producing
engines. It was trying to do things that were innovative like this six-cylinder and apparently
when Chevrolet got some press in Hot Rod magazine in the mid-1960s talking about some of their hot
V8s, Pontiac got a little jealous and wanted to describe an engine program that had been going on
for some time that well we're going to discuss here today and that is the overhead cam V8 engine
program that Pontiac was developing in the 1960s. The first thing to discuss are its origins and
those really came from Pontiac's chief engineer Malcolm McKellar that you see pictured here
on the cover of the March 1968 Hot Rod magazine along with some of his creations including one
that he's standing next to that's actually a double overhead cam Pontiac V8 with tuned
intake runners and in the foreground you'll see a Pontiac V8 with three two barrel carburetors
and a valve cover that reads overhead cam. That's the one that we're going to talk a little bit more
in depth about but the key thing to note here is that McKellar was really an innovative engineer
and is or was the driving force behind Pontiac's overhead cam six-cylinder that I previously
mentioned as well as the half of V8 Tempest four-cylinder. McKellar also developed Super Duty
389 and 421 cubic inch V8s that really were successful on the NASCAR circuit so much so
that they often beat Ford and Chevrolet at Daytona and along the way McKellar developed a number of
novel items for Pontiac V8s including factory racing camshafts that were named after him.
There was the McKellar number 7, number 10 and so on but perhaps the coolest item that
McKellar put together as team put together were the series of overhead cam V8s that I mentioned
before. Let's first talk about the one that you saw on the cover of Hot Rod Magazine that McKellar
was standing next to that's a double overhead cam V8 actually a 389 cubic inch and it was
four valves four cams and was completed in early 1963. This was back when Pontiac was just starting
to experiment with overhead cam V8s and this particular V8 not only had double overhead cams
and four valves per cylinder but that cross-ram tuned intake runner setup that was outfitted with
fuel injection so talk about a pretty radical setup especially for 1963. Clearly McKellar's team
was well ahead of its time. Now unfortunately not many details of this particular fuel injection
system were revealed to Hot Rod in their 1968 article and for whatever reason Pontiac wanted
to keep it under wraps. All they said was that it was a speed density type fuel injection system.
One can imagine it was a mechanical setup obviously not electronically controlled
but I wonder what was really the difference there between that and some of the fuel injection setups
that were employed by Chevrolet on various vehicles and I believe that double overhead
cam V8 also had a timing belt that drove the overhead cams that was something that was again
very innovative and only used with niche automakers. Interestingly along the way McKellar's team tried
a number of different setups at least not just for the camshafts but also for the number of valves
per cylinder. There were a number of arrangements some with two three and four valves per cylinder
and on the three valves per cylinder experiments interestingly the team not only tried two intake
and one exhaust valve which would be typical by today's standards but the inverse one intake and
two exhaust valves although the intake was significantly larger about two and a quarter
inches versus the exhaust valves. Now what ended up happening is over time the Pontiac engineering
team tried to come up with something that could actually have been production ready and so they
went from the four valve per cylinder double overhead cam belt driven engine that you saw
McKellar standing next to to something slightly more conventional but still unconventional for
the time which was the single overhead cam V8 that we initially started discussing. Now that single
overhead cam V8 had two valves per cylinder so Pontiac had gone away from the radical valve setup
and in part that's why you can see that the valve cover isn't all that large there's just an overhead
cam that's driving the two valves per cylinder but still despite the fact that it was more conventional
in the valve train the engine did have a belt drive overhead cam which would eventually make it
into the Pontiac overhead cam six cylinder engine that was produced from 1966
to 1969 and you can kind of see that in just the overall design of the valve covers it's basically
a similar looking theme the Pontiac designers apparently just lifted that valve cover theme
and put it on the overhead cam six cylinder although they did add PMD to the valve cover
I guess they had a little extra space with two extra cylinders on the bank and so they thought
they would just put that there. Now as I said this single overhead cam engine which I believe
was 421 cubic inches at this point was basically according to McKellar a bolt-on package the
cylinder head bolt arrangement remained the same as the conventional engine and it was relatively
easy to upfit a Pontiac V8 into this configuration. Now along the way there were some modifications
to this V8 but there also were some that were placed in vehicles notice here's one in a vehicle
apparently this was one of Malcolm McKellar's personal cars that Pontiac actually gifted him
upon retirement so this car I don't know where it is today but has to be worth a fair amount of coin
and there's a special kind of I would say I don't know what you'd call it something to contain the
three two barrel carburetors atop the intake manifold so this was a highly unconventional
design. Now eventually Pontiac would shift the overhead cam drive from the front to the rear
because as you can see in the front there's really no place to put an air conditioning compressor or
some other accessories and they would solve that by again putting the overhead cam drive at the
rear now I don't know what that meant for serviceability but that was their decision
and the way that they thought that they could make it more readily packaged into a typical vehicle
and indeed while the overhead cam V8 didn't make it through to production that overhead cam
six cylinder did employ some of the technologies that were developed as a result of this overhead
cam V8 being tested and there were some other technologies that made it into Pontiac engines
as well for instance according to that hot rod article from March of 1968 all assembly line
power plants featured chrome valve stems both on the intake and exhaust hardened valve spring cups
and hardened valve spring cup retainers and the undersides of all ram air engines incorporated
swirl polish so that was something that they learned from the engine program that you saw here
now take a look at this photo this is one again from that hot rod magazine article March of 1968
you can see the overhead cams that are being driven by the belt I can't quite tell what's
on here in this photo if that's a single belt or if that is multiple belts I think it's just
a single belt and then there's a tensioner that's keeping the tension on the belt so
overall just an interesting setup in any case while the overhead cam six did make it through
to production none of these Pontiac overhead cam V8s whether it's the 389 double overhead cam the
421 single overhead cam Pontiac even had a 428 single overhead cam I believe none of them made
it through to production and I think part of the reason here was they felt that their engines could
make enough power without the added cost of the overhead cams and I think a another reason was
just that well this was kind of the end of the performance era and that was known that
engines were going to have to become more efficient and emissions compliant and well that
just meant that there was less room for performance now McKellar would take a more
conventional approach to increase power by developing the Super Duty V8 that was introduced
in the 1970s that was still a pretty hot engine made over 300 net horsepower at a time when 300
net horsepower was something that almost any engine did not make unless it was a racing engine
so not all of the lessons were necessarily lost although that Super Duty engine was very different
from these overhead cam designs thanks again for watching what do you think about the Pontiac
overhead cam V8s do you wish that those were put in the Pontiacs put a comment in the comment
section until next time take care
