How a Mechanical Watch Works

Chrono Chronicles
8 followers
Nov 17, 2026
Mechanical watches have no battery, microchip, or circuitry. Watch parts are machined to near perfection at microscopic sizes and tolerances and can produce accuracy within two to three seconds per day.
AI Generated·May contain errors
I'm Jake O'Neill, creator of Animagraphs,
and this is how a mechanical watch works.
Watches have no battery, microchip, or circuitry.
Watch parts are machined to near perfection at
microscopic sizes and tolerances
and can produce accuracy within two to three seconds per day.
Let's take a high-level view before diving into specific parts.
Power is stored in the
mainspring and released in reliable increments
by the escapement assembly.
The gears that connect the mainspring
and escapement turn at various speeds,
allowing the watch to tell time.
Now let's look at each section in depth.
The crown. The crown is pulled out to set the time
and pushed in to wind the watch.
The setting jumper has indents to keep
the crown mechanism locked in place.
Each mode engages different gear sets.
The crown is pushed in for winding.
The sliding pinion meshes with the set
of gears connected to the mainspring.
The crown is pulled out to set the time.
When the crown is pulled outwards, the setting lever clicks
into the second indent in the rigid setting jumper.
At the same time,
this setting lever presses against the spring-loaded yoke.
The yoke moves the sliding pinion
into connection with time setting gears.
Let's see that transition a few more times.
The mainspring.
The mainspring is a thin, nearly foot-long strip of hardened metal
coiled into a spring and contained by the mainspring barrel.
It's connected to the winding pinion at one end
and the mainspring barrel at the other.
The winding pinion moves independently of the barrel.
A connected ratchet wheel
and click assembly allows the pinion to rotate in only one direction,
keeping the spring from unwinding
and ensuring that spring power can only exit through the barrel.
Wheel Train
Wheel train drives timekeeping hands and associated wheels.
The center wheel is driven by the mainspring barrel
and rotates once per hour.
It holds the minute hand, and its 60 minute journey
is often divided up into minute marks on the watch face.
The third wheel flows power through to the fourth wheel.
The fourth wheel rotates once per minute in incremental ticks,
and holds the seconds hand.
Again, marks on the watch face can make it easier to see how many
seconds have passed within one full, minute-long revolution.
The axle of each wheel rests in a synthetic jewel bearing.
The near frictionless jewels can keep internal
watch mechanics running smoothly for decades.
The MotionWorks. The MotionWorks allows watch hands
to be freely rotated for time setting
and also performs a 12 to 1 speed reduction for the hour hand.
Since the center wheel and minute
hand rotates once per hour,
the hour hand needs to make a much slower journey, completing a
full rotation once every 12 hours
as it passes by hour marks on the watch face.
This speed reduction is achieved as power flows from the cannon pinion
through the minute wheel to the hour wheel.
The cannon pinion and hour wheel are press fit to the
pinions that support them.
This means that with enough force they can be moved for time setting
without disturbing the rigid underlying wheel train
that otherwise drives them. The escapement
and balance wheel. The balance wheel swings
in a precise rhythm knocking the pallet fork back and forth
Allowing the escape wheel to move,
which releases mainspring power in small, metered increments.
The balance wheel.
The balance wheel is the most fragile part of the watch.
It's supported by a shock-absorbent mounting system,
complete with a jewel bearing and capstone,
which protects sensitive parts from impact.
For example, if the watch is dropped,
the balance wheel is partly driven by the hairspring.
The escapement.
The pallet fork and escape wheel form the escapement.
A clever exchange of power happens here
that forms the heart of mechanical watch operation.
Driven by the hairspring,
the balance wheel impulse pin bumps
into one side of the pallet fork,
releasing the opposing pallet jewel
from its locked position against an escape wheel tooth.
Just as the pallet jewel slips free,
the specially shaped escape wheel tooth
delivers a little impulse of power
from the mainspring through the pallet fork.
Which in turn pushes the impulse pin launching
the balance wheel into another swing.
And so the process repeats as long as the watch has mainspring power.
The hairspring has regulator pins
to adjust the active length of the spring.
This alters the balance wheel swing rate
and as such the speed of the entire watch.
This is what is meant by regulating a watch
that keeps time too fast or too slow.
The characteristic watch ticking sound is made
by pallet jewels as they catch escape wheel teeth.
Each incremental escape wheel rotation is called a beat.
A common watch beat rate
is 21,600 beats per hour,
which is 6 beats per second.
Supporting Structure
Various specially shaped metal plates support watch internals.
The main plate serves as the base.
The barrel bridge holds the mainspring barrel and associated parts.
The train wheel bridge supports the wheel train,
the pallet bridge holds the pallet fork,
and the balance bridge supports the balance wheel
and regulator assembly.
